Experimental investigation of wood fibre cement composite wall panel under axial loading

Mst Sadia Mahzabin, Roszilah Hamid

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Wood fibre cement (WFC) composite wall panels were cast and tested under axial load with 4/6 wood/cement ratio, 0.8 water/cement ratio, three chemical additives and horizontal and vertical reinforcement. Other panels with the same mix design proportion without reinforcement were also tested and compared with the commercially available WFC composite Duralite boards. An experimental result for the Duralite boards, the specimen showed quick failure with lower loading value and also with axial deformation. The WFC panel without reinforcement showed more brittle type of failure in that they were unable to sustain any more loading after reaching the maximum load. The failure for the WFC panel with reinforcement was gradual and this behaviour was attributed to the presence of steel as they act like bridges between cracks preventing sudden failure. The WFC panels without reinforcement results are higher than the theoretical value and also higher than the Duralite board panels.

Original languageEnglish
Title of host publicationIOP Conference Series: Materials Science and Engineering
PublisherInstitute of Physics Publishing
Volume78
Edition1
DOIs
Publication statusPublished - 2015
Event9th Curtin University of Technology Science and Engineering International Conference 2014: Discovering, Innovating and Engineering, CUTSE 2014 - Sarawak, Malaysia
Duration: 3 Dec 20144 Dec 2014

Other

Other9th Curtin University of Technology Science and Engineering International Conference 2014: Discovering, Innovating and Engineering, CUTSE 2014
CountryMalaysia
CitySarawak
Period3/12/144/12/14

Fingerprint

Wood
Cements
Reinforcement
Fibers
Composite materials
Steel
Axial loads
Cracks
Water

Keywords

  • axial loading
  • load bearing
  • wall panels
  • Wood Fibre Cement Composite

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)

Cite this

Mahzabin, M. S., & Hamid, R. (2015). Experimental investigation of wood fibre cement composite wall panel under axial loading. In IOP Conference Series: Materials Science and Engineering (1 ed., Vol. 78). [012037] Institute of Physics Publishing. https://doi.org/10.1088/1757-899X/78/1/012037

Experimental investigation of wood fibre cement composite wall panel under axial loading. / Mahzabin, Mst Sadia; Hamid, Roszilah.

IOP Conference Series: Materials Science and Engineering. Vol. 78 1. ed. Institute of Physics Publishing, 2015. 012037.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mahzabin, MS & Hamid, R 2015, Experimental investigation of wood fibre cement composite wall panel under axial loading. in IOP Conference Series: Materials Science and Engineering. 1 edn, vol. 78, 012037, Institute of Physics Publishing, 9th Curtin University of Technology Science and Engineering International Conference 2014: Discovering, Innovating and Engineering, CUTSE 2014, Sarawak, Malaysia, 3/12/14. https://doi.org/10.1088/1757-899X/78/1/012037
Mahzabin MS, Hamid R. Experimental investigation of wood fibre cement composite wall panel under axial loading. In IOP Conference Series: Materials Science and Engineering. 1 ed. Vol. 78. Institute of Physics Publishing. 2015. 012037 https://doi.org/10.1088/1757-899X/78/1/012037
Mahzabin, Mst Sadia ; Hamid, Roszilah. / Experimental investigation of wood fibre cement composite wall panel under axial loading. IOP Conference Series: Materials Science and Engineering. Vol. 78 1. ed. Institute of Physics Publishing, 2015.
@inproceedings{226b3d98db594e0c9de1b0a49579b457,
title = "Experimental investigation of wood fibre cement composite wall panel under axial loading",
abstract = "Wood fibre cement (WFC) composite wall panels were cast and tested under axial load with 4/6 wood/cement ratio, 0.8 water/cement ratio, three chemical additives and horizontal and vertical reinforcement. Other panels with the same mix design proportion without reinforcement were also tested and compared with the commercially available WFC composite Duralite boards. An experimental result for the Duralite boards, the specimen showed quick failure with lower loading value and also with axial deformation. The WFC panel without reinforcement showed more brittle type of failure in that they were unable to sustain any more loading after reaching the maximum load. The failure for the WFC panel with reinforcement was gradual and this behaviour was attributed to the presence of steel as they act like bridges between cracks preventing sudden failure. The WFC panels without reinforcement results are higher than the theoretical value and also higher than the Duralite board panels.",
keywords = "axial loading, load bearing, wall panels, Wood Fibre Cement Composite",
author = "Mahzabin, {Mst Sadia} and Roszilah Hamid",
year = "2015",
doi = "10.1088/1757-899X/78/1/012037",
language = "English",
volume = "78",
booktitle = "IOP Conference Series: Materials Science and Engineering",
publisher = "Institute of Physics Publishing",
edition = "1",

}

TY - GEN

T1 - Experimental investigation of wood fibre cement composite wall panel under axial loading

AU - Mahzabin, Mst Sadia

AU - Hamid, Roszilah

PY - 2015

Y1 - 2015

N2 - Wood fibre cement (WFC) composite wall panels were cast and tested under axial load with 4/6 wood/cement ratio, 0.8 water/cement ratio, three chemical additives and horizontal and vertical reinforcement. Other panels with the same mix design proportion without reinforcement were also tested and compared with the commercially available WFC composite Duralite boards. An experimental result for the Duralite boards, the specimen showed quick failure with lower loading value and also with axial deformation. The WFC panel without reinforcement showed more brittle type of failure in that they were unable to sustain any more loading after reaching the maximum load. The failure for the WFC panel with reinforcement was gradual and this behaviour was attributed to the presence of steel as they act like bridges between cracks preventing sudden failure. The WFC panels without reinforcement results are higher than the theoretical value and also higher than the Duralite board panels.

AB - Wood fibre cement (WFC) composite wall panels were cast and tested under axial load with 4/6 wood/cement ratio, 0.8 water/cement ratio, three chemical additives and horizontal and vertical reinforcement. Other panels with the same mix design proportion without reinforcement were also tested and compared with the commercially available WFC composite Duralite boards. An experimental result for the Duralite boards, the specimen showed quick failure with lower loading value and also with axial deformation. The WFC panel without reinforcement showed more brittle type of failure in that they were unable to sustain any more loading after reaching the maximum load. The failure for the WFC panel with reinforcement was gradual and this behaviour was attributed to the presence of steel as they act like bridges between cracks preventing sudden failure. The WFC panels without reinforcement results are higher than the theoretical value and also higher than the Duralite board panels.

KW - axial loading

KW - load bearing

KW - wall panels

KW - Wood Fibre Cement Composite

UR - http://www.scopus.com/inward/record.url?scp=84926443319&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84926443319&partnerID=8YFLogxK

U2 - 10.1088/1757-899X/78/1/012037

DO - 10.1088/1757-899X/78/1/012037

M3 - Conference contribution

VL - 78

BT - IOP Conference Series: Materials Science and Engineering

PB - Institute of Physics Publishing

ER -