Evaluation of hole performance and force magnitude on drilling parameter for orthopaedic surgical bone drilling

Noorazizi Mohamad Samsuddin, Raja Izamshah, Mohd Shahir Kasim, Che Hassan Che Haron

Research output: Contribution to journalArticle

Abstract

Internal fixation of bone fractures using immobilization screws and plate is a common procedure in orthopaedic surgery. This surgical procedure involved drilling process into bone and fixative component'sinteraction, which create several problems. Few of the common problems associated in the bone drilling process are hole's accuracy, drill wanders and excessive heat generation, which was directly related to the drilling parameters. This paper investigates the effect of drilling parameter namely spindle speed and feed rate on the cutting force and hole performances namely suraface roughness and surface morphology. Designs of Experiment (DOE) historical data of Response Surface Method (RSM) were adopted to evaluate the correlation between the cutting parameter and the hole's performance. From the conducted investigation, it was found that the most dominant factor that affects the holes performance was spindle speed followed by the feed rate. In addition, the interaction between feed rate and spindle speed also controlled the hole's performances.

Original languageEnglish
Pages (from-to)37-47
Number of pages11
JournalJournal of Mechanical Engineering
VolumeSI 3
Issue number2
Publication statusPublished - 1 Jan 2017

Fingerprint

Orthopedics
Drilling
Bone
Heat generation
Design of experiments
Surgery
Surface morphology
Surface roughness

Keywords

  • Cutting force
  • Machining
  • RSM
  • Surface roughness
  • Surgical drill-bit

ASJC Scopus subject areas

  • Mechanical Engineering

Cite this

Evaluation of hole performance and force magnitude on drilling parameter for orthopaedic surgical bone drilling. / Samsuddin, Noorazizi Mohamad; Izamshah, Raja; Kasim, Mohd Shahir; Che Haron, Che Hassan.

In: Journal of Mechanical Engineering, Vol. SI 3, No. 2, 01.01.2017, p. 37-47.

Research output: Contribution to journalArticle

Samsuddin, Noorazizi Mohamad ; Izamshah, Raja ; Kasim, Mohd Shahir ; Che Haron, Che Hassan. / Evaluation of hole performance and force magnitude on drilling parameter for orthopaedic surgical bone drilling. In: Journal of Mechanical Engineering. 2017 ; Vol. SI 3, No. 2. pp. 37-47.
@article{767c0b878b084fabac843b31efe940f2,
title = "Evaluation of hole performance and force magnitude on drilling parameter for orthopaedic surgical bone drilling",
abstract = "Internal fixation of bone fractures using immobilization screws and plate is a common procedure in orthopaedic surgery. This surgical procedure involved drilling process into bone and fixative component'sinteraction, which create several problems. Few of the common problems associated in the bone drilling process are hole's accuracy, drill wanders and excessive heat generation, which was directly related to the drilling parameters. This paper investigates the effect of drilling parameter namely spindle speed and feed rate on the cutting force and hole performances namely suraface roughness and surface morphology. Designs of Experiment (DOE) historical data of Response Surface Method (RSM) were adopted to evaluate the correlation between the cutting parameter and the hole's performance. From the conducted investigation, it was found that the most dominant factor that affects the holes performance was spindle speed followed by the feed rate. In addition, the interaction between feed rate and spindle speed also controlled the hole's performances.",
keywords = "Cutting force, Machining, RSM, Surface roughness, Surgical drill-bit",
author = "Samsuddin, {Noorazizi Mohamad} and Raja Izamshah and Kasim, {Mohd Shahir} and {Che Haron}, {Che Hassan}",
year = "2017",
month = "1",
day = "1",
language = "English",
volume = "SI 3",
pages = "37--47",
journal = "Journal of Mechanical Engineering",
issn = "1823-5514",
publisher = "Institut Pengurusan Penyelidikan (RMI), Universiti Teknologi MARA",
number = "2",

}

TY - JOUR

T1 - Evaluation of hole performance and force magnitude on drilling parameter for orthopaedic surgical bone drilling

AU - Samsuddin, Noorazizi Mohamad

AU - Izamshah, Raja

AU - Kasim, Mohd Shahir

AU - Che Haron, Che Hassan

PY - 2017/1/1

Y1 - 2017/1/1

N2 - Internal fixation of bone fractures using immobilization screws and plate is a common procedure in orthopaedic surgery. This surgical procedure involved drilling process into bone and fixative component'sinteraction, which create several problems. Few of the common problems associated in the bone drilling process are hole's accuracy, drill wanders and excessive heat generation, which was directly related to the drilling parameters. This paper investigates the effect of drilling parameter namely spindle speed and feed rate on the cutting force and hole performances namely suraface roughness and surface morphology. Designs of Experiment (DOE) historical data of Response Surface Method (RSM) were adopted to evaluate the correlation between the cutting parameter and the hole's performance. From the conducted investigation, it was found that the most dominant factor that affects the holes performance was spindle speed followed by the feed rate. In addition, the interaction between feed rate and spindle speed also controlled the hole's performances.

AB - Internal fixation of bone fractures using immobilization screws and plate is a common procedure in orthopaedic surgery. This surgical procedure involved drilling process into bone and fixative component'sinteraction, which create several problems. Few of the common problems associated in the bone drilling process are hole's accuracy, drill wanders and excessive heat generation, which was directly related to the drilling parameters. This paper investigates the effect of drilling parameter namely spindle speed and feed rate on the cutting force and hole performances namely suraface roughness and surface morphology. Designs of Experiment (DOE) historical data of Response Surface Method (RSM) were adopted to evaluate the correlation between the cutting parameter and the hole's performance. From the conducted investigation, it was found that the most dominant factor that affects the holes performance was spindle speed followed by the feed rate. In addition, the interaction between feed rate and spindle speed also controlled the hole's performances.

KW - Cutting force

KW - Machining

KW - RSM

KW - Surface roughness

KW - Surgical drill-bit

UR - http://www.scopus.com/inward/record.url?scp=85041082773&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85041082773&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:85041082773

VL - SI 3

SP - 37

EP - 47

JO - Journal of Mechanical Engineering

JF - Journal of Mechanical Engineering

SN - 1823-5514

IS - 2

ER -