Employability skills for an entry-level engineer as seen by Malaysian employers

Research output: Chapter in Book/Report/Conference proceedingConference contribution

14 Citations (Scopus)

Abstract

In an earlier publication, the authors have proposed a model on practical framework of engineering employability skills, i.e. the Malaysian Engineering Employability Skills (MEES). The framework discusses on the possible employability skills as required for an entry level engineer in Malaysia based on many other earlier studies. A set of questionnaires was later developed to gauge this model from the perspective of Malaysian employers from engineering sectors. Based on the results obtained, this paper will discuss, among others, the preferred entry-level employability skills as valued by employers when hiring fresh engineering graduates. The data was collected from September to December 2009 through face-to-face and telephone interviews with employers from Kelang Valley area, the main industrial area in Malaysia. Five hundreds employers were approached, and of this, three hundreds were successfully interviewed. The interviews were only carried out with high ranking officers, in this case; Head of Division or higher to assure accurate results. The questionnaires comprise ten (10) main employability skills as described in MEES. A "multi-attribute value technique" and statistical methods were used for data analysis. The findings suggested that the employers perceived employability skills as "required" with an average rating score of 4.06 out of 5.00. The most required skill is "communication skills" while the least required is "engineering system approach". However, there are differences in the priorities of employability skills by the four different categories of industries considered in this study. The framework and the findings presented perhaps can be used as guidance for the employers in their recruitment exercise. The findings could also be helpful in guiding the education providers, trainers, career advisors and the likes in increasing the employability skills of engineering fresh graduates.

Original languageEnglish
Title of host publication2011 IEEE Global Engineering Education Conference, EDUCON 2011
Pages80-85
Number of pages6
DOIs
Publication statusPublished - 2011
Event2011 IEEE Global Engineering Education Conference, EDUCON 2011 - Amman
Duration: 4 Apr 20116 Apr 2011

Other

Other2011 IEEE Global Engineering Education Conference, EDUCON 2011
CityAmman
Period4/4/116/4/11

Fingerprint

entry level
employability
engineer
employer
Engineers
engineering
Malaysia
Systems engineering
Telephone
graduate
system engineering
Gages
Statistical methods
questionnaire
Education
telephone interview
hiring
statistical method
communication skills
ranking

Keywords

  • Employability skills
  • employers
  • engineering graduates

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Education

Cite this

Yuzainee, M. Y., Zaharim, A., & Omar, M. Z. (2011). Employability skills for an entry-level engineer as seen by Malaysian employers. In 2011 IEEE Global Engineering Education Conference, EDUCON 2011 (pp. 80-85). [5773117] https://doi.org/10.1109/EDUCON.2011.5773117

Employability skills for an entry-level engineer as seen by Malaysian employers. / Yuzainee, M. Y.; Zaharim, Azami; Omar, Mohd. Zaidi.

2011 IEEE Global Engineering Education Conference, EDUCON 2011. 2011. p. 80-85 5773117.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Yuzainee, MY, Zaharim, A & Omar, MZ 2011, Employability skills for an entry-level engineer as seen by Malaysian employers. in 2011 IEEE Global Engineering Education Conference, EDUCON 2011., 5773117, pp. 80-85, 2011 IEEE Global Engineering Education Conference, EDUCON 2011, Amman, 4/4/11. https://doi.org/10.1109/EDUCON.2011.5773117
Yuzainee MY, Zaharim A, Omar MZ. Employability skills for an entry-level engineer as seen by Malaysian employers. In 2011 IEEE Global Engineering Education Conference, EDUCON 2011. 2011. p. 80-85. 5773117 https://doi.org/10.1109/EDUCON.2011.5773117
Yuzainee, M. Y. ; Zaharim, Azami ; Omar, Mohd. Zaidi. / Employability skills for an entry-level engineer as seen by Malaysian employers. 2011 IEEE Global Engineering Education Conference, EDUCON 2011. 2011. pp. 80-85
@inproceedings{6a2fda92724245ba89e74283ccbbc8e9,
title = "Employability skills for an entry-level engineer as seen by Malaysian employers",
abstract = "In an earlier publication, the authors have proposed a model on practical framework of engineering employability skills, i.e. the Malaysian Engineering Employability Skills (MEES). The framework discusses on the possible employability skills as required for an entry level engineer in Malaysia based on many other earlier studies. A set of questionnaires was later developed to gauge this model from the perspective of Malaysian employers from engineering sectors. Based on the results obtained, this paper will discuss, among others, the preferred entry-level employability skills as valued by employers when hiring fresh engineering graduates. The data was collected from September to December 2009 through face-to-face and telephone interviews with employers from Kelang Valley area, the main industrial area in Malaysia. Five hundreds employers were approached, and of this, three hundreds were successfully interviewed. The interviews were only carried out with high ranking officers, in this case; Head of Division or higher to assure accurate results. The questionnaires comprise ten (10) main employability skills as described in MEES. A {"}multi-attribute value technique{"} and statistical methods were used for data analysis. The findings suggested that the employers perceived employability skills as {"}required{"} with an average rating score of 4.06 out of 5.00. The most required skill is {"}communication skills{"} while the least required is {"}engineering system approach{"}. However, there are differences in the priorities of employability skills by the four different categories of industries considered in this study. The framework and the findings presented perhaps can be used as guidance for the employers in their recruitment exercise. The findings could also be helpful in guiding the education providers, trainers, career advisors and the likes in increasing the employability skills of engineering fresh graduates.",
keywords = "Employability skills, employers, engineering graduates",
author = "Yuzainee, {M. Y.} and Azami Zaharim and Omar, {Mohd. Zaidi}",
year = "2011",
doi = "10.1109/EDUCON.2011.5773117",
language = "English",
isbn = "9781612846439",
pages = "80--85",
booktitle = "2011 IEEE Global Engineering Education Conference, EDUCON 2011",

}

TY - GEN

T1 - Employability skills for an entry-level engineer as seen by Malaysian employers

AU - Yuzainee, M. Y.

AU - Zaharim, Azami

AU - Omar, Mohd. Zaidi

PY - 2011

Y1 - 2011

N2 - In an earlier publication, the authors have proposed a model on practical framework of engineering employability skills, i.e. the Malaysian Engineering Employability Skills (MEES). The framework discusses on the possible employability skills as required for an entry level engineer in Malaysia based on many other earlier studies. A set of questionnaires was later developed to gauge this model from the perspective of Malaysian employers from engineering sectors. Based on the results obtained, this paper will discuss, among others, the preferred entry-level employability skills as valued by employers when hiring fresh engineering graduates. The data was collected from September to December 2009 through face-to-face and telephone interviews with employers from Kelang Valley area, the main industrial area in Malaysia. Five hundreds employers were approached, and of this, three hundreds were successfully interviewed. The interviews were only carried out with high ranking officers, in this case; Head of Division or higher to assure accurate results. The questionnaires comprise ten (10) main employability skills as described in MEES. A "multi-attribute value technique" and statistical methods were used for data analysis. The findings suggested that the employers perceived employability skills as "required" with an average rating score of 4.06 out of 5.00. The most required skill is "communication skills" while the least required is "engineering system approach". However, there are differences in the priorities of employability skills by the four different categories of industries considered in this study. The framework and the findings presented perhaps can be used as guidance for the employers in their recruitment exercise. The findings could also be helpful in guiding the education providers, trainers, career advisors and the likes in increasing the employability skills of engineering fresh graduates.

AB - In an earlier publication, the authors have proposed a model on practical framework of engineering employability skills, i.e. the Malaysian Engineering Employability Skills (MEES). The framework discusses on the possible employability skills as required for an entry level engineer in Malaysia based on many other earlier studies. A set of questionnaires was later developed to gauge this model from the perspective of Malaysian employers from engineering sectors. Based on the results obtained, this paper will discuss, among others, the preferred entry-level employability skills as valued by employers when hiring fresh engineering graduates. The data was collected from September to December 2009 through face-to-face and telephone interviews with employers from Kelang Valley area, the main industrial area in Malaysia. Five hundreds employers were approached, and of this, three hundreds were successfully interviewed. The interviews were only carried out with high ranking officers, in this case; Head of Division or higher to assure accurate results. The questionnaires comprise ten (10) main employability skills as described in MEES. A "multi-attribute value technique" and statistical methods were used for data analysis. The findings suggested that the employers perceived employability skills as "required" with an average rating score of 4.06 out of 5.00. The most required skill is "communication skills" while the least required is "engineering system approach". However, there are differences in the priorities of employability skills by the four different categories of industries considered in this study. The framework and the findings presented perhaps can be used as guidance for the employers in their recruitment exercise. The findings could also be helpful in guiding the education providers, trainers, career advisors and the likes in increasing the employability skills of engineering fresh graduates.

KW - Employability skills

KW - employers

KW - engineering graduates

UR - http://www.scopus.com/inward/record.url?scp=79960284334&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79960284334&partnerID=8YFLogxK

U2 - 10.1109/EDUCON.2011.5773117

DO - 10.1109/EDUCON.2011.5773117

M3 - Conference contribution

AN - SCOPUS:79960284334

SN - 9781612846439

SP - 80

EP - 85

BT - 2011 IEEE Global Engineering Education Conference, EDUCON 2011

ER -