Efficient Class-E design for inductive powering wireless biotelemetry applications

Saad Mutashar Abbas, Hannan M A, Salina Abdul Samad

Research output: Chapter in Book/Report/Conference proceedingConference contribution

12 Citations (Scopus)

Abstract

This paper introduces a modified an efficient design for different Class-E power amplifiers suitable to be use in biomedical implantable devices and in biomedical wireless telemetry devices which is usually have a small load resistor (several Ohms) due to its inductive powering. The different Class-E amplifiers operated according to the frequency chart for the medical implant communications service (MICS) 27 MH Z, and industrial scientific and medical (ISM) (13.56 MH Z), and low frequency 125-135 KH Z. The results show that the proposed class-E design could use the same values of C 1, C 2, L 2 for small and optimum load resistor with high efficient more than 80% All these three class-E power amplifiers will be presents in this work and will be simulate with the MATLAB/SIMULINK environment, and for further verification all the circuits will be simulated with electronics workbench MULTISIM 9.

Original languageEnglish
Title of host publication2012 International Conference on Biomedical Engineering, ICoBE 2012
Pages445-449
Number of pages5
DOIs
Publication statusPublished - 2012
Event2012 International Conference on Biomedical Engineering, ICoBE 2012 - Penang
Duration: 27 Feb 201228 Feb 2012

Other

Other2012 International Conference on Biomedical Engineering, ICoBE 2012
CityPenang
Period27/2/1228/2/12

Fingerprint

Biotelemetry
Power amplifiers
Resistors
Telemetering
MATLAB
Electronic equipment
Networks (circuits)
Communication

Keywords

  • class-E amplifiers
  • implated devices
  • switching amplifiers
  • transcutaneous energy transmission

ASJC Scopus subject areas

  • Biomedical Engineering

Cite this

Abbas, S. M., M A, H., & Abdul Samad, S. (2012). Efficient Class-E design for inductive powering wireless biotelemetry applications. In 2012 International Conference on Biomedical Engineering, ICoBE 2012 (pp. 445-449). [6179055] https://doi.org/10.1109/ICoBE.2012.6179055

Efficient Class-E design for inductive powering wireless biotelemetry applications. / Abbas, Saad Mutashar; M A, Hannan; Abdul Samad, Salina.

2012 International Conference on Biomedical Engineering, ICoBE 2012. 2012. p. 445-449 6179055.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abbas, SM, M A, H & Abdul Samad, S 2012, Efficient Class-E design for inductive powering wireless biotelemetry applications. in 2012 International Conference on Biomedical Engineering, ICoBE 2012., 6179055, pp. 445-449, 2012 International Conference on Biomedical Engineering, ICoBE 2012, Penang, 27/2/12. https://doi.org/10.1109/ICoBE.2012.6179055
Abbas SM, M A H, Abdul Samad S. Efficient Class-E design for inductive powering wireless biotelemetry applications. In 2012 International Conference on Biomedical Engineering, ICoBE 2012. 2012. p. 445-449. 6179055 https://doi.org/10.1109/ICoBE.2012.6179055
Abbas, Saad Mutashar ; M A, Hannan ; Abdul Samad, Salina. / Efficient Class-E design for inductive powering wireless biotelemetry applications. 2012 International Conference on Biomedical Engineering, ICoBE 2012. 2012. pp. 445-449
@inproceedings{b3edca28ac5c466b83983401cec345ac,
title = "Efficient Class-E design for inductive powering wireless biotelemetry applications",
abstract = "This paper introduces a modified an efficient design for different Class-E power amplifiers suitable to be use in biomedical implantable devices and in biomedical wireless telemetry devices which is usually have a small load resistor (several Ohms) due to its inductive powering. The different Class-E amplifiers operated according to the frequency chart for the medical implant communications service (MICS) 27 MH Z, and industrial scientific and medical (ISM) (13.56 MH Z), and low frequency 125-135 KH Z. The results show that the proposed class-E design could use the same values of C 1, C 2, L 2 for small and optimum load resistor with high efficient more than 80{\%} All these three class-E power amplifiers will be presents in this work and will be simulate with the MATLAB/SIMULINK environment, and for further verification all the circuits will be simulated with electronics workbench MULTISIM 9.",
keywords = "class-E amplifiers, implated devices, switching amplifiers, transcutaneous energy transmission",
author = "Abbas, {Saad Mutashar} and {M A}, Hannan and {Abdul Samad}, Salina",
year = "2012",
doi = "10.1109/ICoBE.2012.6179055",
language = "English",
isbn = "9781457719899",
pages = "445--449",
booktitle = "2012 International Conference on Biomedical Engineering, ICoBE 2012",

}

TY - GEN

T1 - Efficient Class-E design for inductive powering wireless biotelemetry applications

AU - Abbas, Saad Mutashar

AU - M A, Hannan

AU - Abdul Samad, Salina

PY - 2012

Y1 - 2012

N2 - This paper introduces a modified an efficient design for different Class-E power amplifiers suitable to be use in biomedical implantable devices and in biomedical wireless telemetry devices which is usually have a small load resistor (several Ohms) due to its inductive powering. The different Class-E amplifiers operated according to the frequency chart for the medical implant communications service (MICS) 27 MH Z, and industrial scientific and medical (ISM) (13.56 MH Z), and low frequency 125-135 KH Z. The results show that the proposed class-E design could use the same values of C 1, C 2, L 2 for small and optimum load resistor with high efficient more than 80% All these three class-E power amplifiers will be presents in this work and will be simulate with the MATLAB/SIMULINK environment, and for further verification all the circuits will be simulated with electronics workbench MULTISIM 9.

AB - This paper introduces a modified an efficient design for different Class-E power amplifiers suitable to be use in biomedical implantable devices and in biomedical wireless telemetry devices which is usually have a small load resistor (several Ohms) due to its inductive powering. The different Class-E amplifiers operated according to the frequency chart for the medical implant communications service (MICS) 27 MH Z, and industrial scientific and medical (ISM) (13.56 MH Z), and low frequency 125-135 KH Z. The results show that the proposed class-E design could use the same values of C 1, C 2, L 2 for small and optimum load resistor with high efficient more than 80% All these three class-E power amplifiers will be presents in this work and will be simulate with the MATLAB/SIMULINK environment, and for further verification all the circuits will be simulated with electronics workbench MULTISIM 9.

KW - class-E amplifiers

KW - implated devices

KW - switching amplifiers

KW - transcutaneous energy transmission

UR - http://www.scopus.com/inward/record.url?scp=84860650360&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84860650360&partnerID=8YFLogxK

U2 - 10.1109/ICoBE.2012.6179055

DO - 10.1109/ICoBE.2012.6179055

M3 - Conference contribution

SN - 9781457719899

SP - 445

EP - 449

BT - 2012 International Conference on Biomedical Engineering, ICoBE 2012

ER -