Effect of plasma spray parameters on porosity of fly ash deposited coatings

M. M. Muhammad, Azman Jalar @ Jalil, Roslinda Shamsudin, M. C. Isa

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

This paper presents on a study of atmospheric plasma spray parameters using fly ash as a feedstock material to spray onto the mild steel substrates. The experiments were carried out using two level fractional factorial design with four variables namely the primary and carrier gas pressures, powder feed rate and plasma power. The evaluation of response was performed on porosity by using image analysis. The results obtained show that primary gas pressure, powder feed rate and interaction primary gas pressure and carrier gas pressure are most significant factors in affecting the porosity of fly ash deposited coatings.

Original languageEnglish
Title of host publication2014 UKM FST Postgraduate Colloquium - Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2014 Postgraduate Colloquium
EditorsZahari Ibrahim, Haja Maideen Kader Maideen, Nazlina Ibrahim, Nurul Huda Abd Karim, Taufik Yusof, Fatimah Abdul Razak, Nurulkamal Maseran, Rozida Mohd Khalid, Noor Baa'yah Ibrahim, Hasidah Mohd. Sidek, Mohd Salmi Md Noorani, Norbert Simon
PublisherAmerican Institute of Physics Inc.
Pages116-121
Number of pages6
ISBN (Electronic)9780735412507
DOIs
Publication statusPublished - 1 Jan 2014
Event2014 Postgraduate Colloquium of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology, UKM FST 2014 - Selangor, Malaysia
Duration: 9 Apr 201411 Apr 2014

Publication series

NameAIP Conference Proceedings
Volume1614
ISSN (Print)0094-243X
ISSN (Electronic)1551-7616

Other

Other2014 Postgraduate Colloquium of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology, UKM FST 2014
CountryMalaysia
CitySelangor
Period9/4/1411/4/14

Fingerprint

fly ash
gas pressure
sprayers
porosity
coatings
factorial design
image analysis
steels
evaluation
interactions

Keywords

  • Atmospheric plasma spray
  • Deposited coatings
  • Fly ash
  • Image analysis
  • Porosity

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Muhammad, M. M., Jalar @ Jalil, A., Shamsudin, R., & Isa, M. C. (2014). Effect of plasma spray parameters on porosity of fly ash deposited coatings. In Z. Ibrahim, H. M. K. Maideen, N. Ibrahim, N. H. A. Karim, T. Yusof, F. A. Razak, N. Maseran, R. M. Khalid, N. B. Ibrahim, H. M. Sidek, M. S. M. Noorani, ... N. Simon (Eds.), 2014 UKM FST Postgraduate Colloquium - Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2014 Postgraduate Colloquium (pp. 116-121). (AIP Conference Proceedings; Vol. 1614). American Institute of Physics Inc.. https://doi.org/10.1063/1.4895182

Effect of plasma spray parameters on porosity of fly ash deposited coatings. / Muhammad, M. M.; Jalar @ Jalil, Azman; Shamsudin, Roslinda; Isa, M. C.

2014 UKM FST Postgraduate Colloquium - Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2014 Postgraduate Colloquium. ed. / Zahari Ibrahim; Haja Maideen Kader Maideen; Nazlina Ibrahim; Nurul Huda Abd Karim; Taufik Yusof; Fatimah Abdul Razak; Nurulkamal Maseran; Rozida Mohd Khalid; Noor Baa'yah Ibrahim; Hasidah Mohd. Sidek; Mohd Salmi Md Noorani; Norbert Simon. American Institute of Physics Inc., 2014. p. 116-121 (AIP Conference Proceedings; Vol. 1614).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Muhammad, MM, Jalar @ Jalil, A, Shamsudin, R & Isa, MC 2014, Effect of plasma spray parameters on porosity of fly ash deposited coatings. in Z Ibrahim, HMK Maideen, N Ibrahim, NHA Karim, T Yusof, FA Razak, N Maseran, RM Khalid, NB Ibrahim, HM Sidek, MSM Noorani & N Simon (eds), 2014 UKM FST Postgraduate Colloquium - Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2014 Postgraduate Colloquium. AIP Conference Proceedings, vol. 1614, American Institute of Physics Inc., pp. 116-121, 2014 Postgraduate Colloquium of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology, UKM FST 2014, Selangor, Malaysia, 9/4/14. https://doi.org/10.1063/1.4895182
Muhammad MM, Jalar @ Jalil A, Shamsudin R, Isa MC. Effect of plasma spray parameters on porosity of fly ash deposited coatings. In Ibrahim Z, Maideen HMK, Ibrahim N, Karim NHA, Yusof T, Razak FA, Maseran N, Khalid RM, Ibrahim NB, Sidek HM, Noorani MSM, Simon N, editors, 2014 UKM FST Postgraduate Colloquium - Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2014 Postgraduate Colloquium. American Institute of Physics Inc. 2014. p. 116-121. (AIP Conference Proceedings). https://doi.org/10.1063/1.4895182
Muhammad, M. M. ; Jalar @ Jalil, Azman ; Shamsudin, Roslinda ; Isa, M. C. / Effect of plasma spray parameters on porosity of fly ash deposited coatings. 2014 UKM FST Postgraduate Colloquium - Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2014 Postgraduate Colloquium. editor / Zahari Ibrahim ; Haja Maideen Kader Maideen ; Nazlina Ibrahim ; Nurul Huda Abd Karim ; Taufik Yusof ; Fatimah Abdul Razak ; Nurulkamal Maseran ; Rozida Mohd Khalid ; Noor Baa'yah Ibrahim ; Hasidah Mohd. Sidek ; Mohd Salmi Md Noorani ; Norbert Simon. American Institute of Physics Inc., 2014. pp. 116-121 (AIP Conference Proceedings).
@inproceedings{0fde769b9dfa4f799b3d9c9f35bc3e4c,
title = "Effect of plasma spray parameters on porosity of fly ash deposited coatings",
abstract = "This paper presents on a study of atmospheric plasma spray parameters using fly ash as a feedstock material to spray onto the mild steel substrates. The experiments were carried out using two level fractional factorial design with four variables namely the primary and carrier gas pressures, powder feed rate and plasma power. The evaluation of response was performed on porosity by using image analysis. The results obtained show that primary gas pressure, powder feed rate and interaction primary gas pressure and carrier gas pressure are most significant factors in affecting the porosity of fly ash deposited coatings.",
keywords = "Atmospheric plasma spray, Deposited coatings, Fly ash, Image analysis, Porosity",
author = "Muhammad, {M. M.} and {Jalar @ Jalil}, Azman and Roslinda Shamsudin and Isa, {M. C.}",
year = "2014",
month = "1",
day = "1",
doi = "10.1063/1.4895182",
language = "English",
series = "AIP Conference Proceedings",
publisher = "American Institute of Physics Inc.",
pages = "116--121",
editor = "Zahari Ibrahim and Maideen, {Haja Maideen Kader} and Nazlina Ibrahim and Karim, {Nurul Huda Abd} and Taufik Yusof and Razak, {Fatimah Abdul} and Nurulkamal Maseran and Khalid, {Rozida Mohd} and Ibrahim, {Noor Baa'yah} and Sidek, {Hasidah Mohd.} and Noorani, {Mohd Salmi Md} and Norbert Simon",
booktitle = "2014 UKM FST Postgraduate Colloquium - Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2014 Postgraduate Colloquium",

}

TY - GEN

T1 - Effect of plasma spray parameters on porosity of fly ash deposited coatings

AU - Muhammad, M. M.

AU - Jalar @ Jalil, Azman

AU - Shamsudin, Roslinda

AU - Isa, M. C.

PY - 2014/1/1

Y1 - 2014/1/1

N2 - This paper presents on a study of atmospheric plasma spray parameters using fly ash as a feedstock material to spray onto the mild steel substrates. The experiments were carried out using two level fractional factorial design with four variables namely the primary and carrier gas pressures, powder feed rate and plasma power. The evaluation of response was performed on porosity by using image analysis. The results obtained show that primary gas pressure, powder feed rate and interaction primary gas pressure and carrier gas pressure are most significant factors in affecting the porosity of fly ash deposited coatings.

AB - This paper presents on a study of atmospheric plasma spray parameters using fly ash as a feedstock material to spray onto the mild steel substrates. The experiments were carried out using two level fractional factorial design with four variables namely the primary and carrier gas pressures, powder feed rate and plasma power. The evaluation of response was performed on porosity by using image analysis. The results obtained show that primary gas pressure, powder feed rate and interaction primary gas pressure and carrier gas pressure are most significant factors in affecting the porosity of fly ash deposited coatings.

KW - Atmospheric plasma spray

KW - Deposited coatings

KW - Fly ash

KW - Image analysis

KW - Porosity

UR - http://www.scopus.com/inward/record.url?scp=85053149383&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85053149383&partnerID=8YFLogxK

U2 - 10.1063/1.4895182

DO - 10.1063/1.4895182

M3 - Conference contribution

T3 - AIP Conference Proceedings

SP - 116

EP - 121

BT - 2014 UKM FST Postgraduate Colloquium - Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2014 Postgraduate Colloquium

A2 - Ibrahim, Zahari

A2 - Maideen, Haja Maideen Kader

A2 - Ibrahim, Nazlina

A2 - Karim, Nurul Huda Abd

A2 - Yusof, Taufik

A2 - Razak, Fatimah Abdul

A2 - Maseran, Nurulkamal

A2 - Khalid, Rozida Mohd

A2 - Ibrahim, Noor Baa'yah

A2 - Sidek, Hasidah Mohd.

A2 - Noorani, Mohd Salmi Md

A2 - Simon, Norbert

PB - American Institute of Physics Inc.

ER -