Effect of nitriding cold roled and shot peening on automotive component fatigue life

N. A. Kadhim, N. Nikabdullah, Shahrum Abdullah, Ahmad Kamal Ariffin Mohd Ihsan

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The finite element modeling and analysis have been performed to investigate the effects of nitriding, cold rolled and shot peening on fatigue life of an automotive lower suspension arm component which fabricated of SAE1045 steel. The finite element analysis (FEA) results indicate a great effect for all surface finish parameters on fatigue life. It shows that nitriding increased the fatigue life of the component better than shot peening, while cold rolled effect was between them. In a nut shell, nitriding can be considered as the best surface treatment to improve the fatigue life of the automotive lower suspension arm which fabricated of SAE1045 steel.

Original languageEnglish
Title of host publicationApplied Mechanics and Materials
Pages324-328
Number of pages5
Volume471
DOIs
Publication statusPublished - 2014
Event4th International Conference on Noise, Vibration and Comfort, NVC 2012 - Kuala Lumpur
Duration: 26 Nov 201228 Nov 2012

Publication series

NameApplied Mechanics and Materials
Volume471
ISSN (Print)16609336
ISSN (Electronic)16627482

Other

Other4th International Conference on Noise, Vibration and Comfort, NVC 2012
CityKuala Lumpur
Period26/11/1228/11/12

Fingerprint

Shot peening
Nitriding
Fatigue of materials
Cold effects
Steel
Surface treatment
Finite element method

Keywords

  • Automotive components
  • Fatigue
  • Finite element analysis
  • Surface treatment

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Kadhim, N. A., Nikabdullah, N., Abdullah, S., & Mohd Ihsan, A. K. A. (2014). Effect of nitriding cold roled and shot peening on automotive component fatigue life. In Applied Mechanics and Materials (Vol. 471, pp. 324-328). (Applied Mechanics and Materials; Vol. 471). https://doi.org/10.4028/www.scientific.net/AMM.471.324

Effect of nitriding cold roled and shot peening on automotive component fatigue life. / Kadhim, N. A.; Nikabdullah, N.; Abdullah, Shahrum; Mohd Ihsan, Ahmad Kamal Ariffin.

Applied Mechanics and Materials. Vol. 471 2014. p. 324-328 (Applied Mechanics and Materials; Vol. 471).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kadhim, NA, Nikabdullah, N, Abdullah, S & Mohd Ihsan, AKA 2014, Effect of nitriding cold roled and shot peening on automotive component fatigue life. in Applied Mechanics and Materials. vol. 471, Applied Mechanics and Materials, vol. 471, pp. 324-328, 4th International Conference on Noise, Vibration and Comfort, NVC 2012, Kuala Lumpur, 26/11/12. https://doi.org/10.4028/www.scientific.net/AMM.471.324
Kadhim NA, Nikabdullah N, Abdullah S, Mohd Ihsan AKA. Effect of nitriding cold roled and shot peening on automotive component fatigue life. In Applied Mechanics and Materials. Vol. 471. 2014. p. 324-328. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.471.324
Kadhim, N. A. ; Nikabdullah, N. ; Abdullah, Shahrum ; Mohd Ihsan, Ahmad Kamal Ariffin. / Effect of nitriding cold roled and shot peening on automotive component fatigue life. Applied Mechanics and Materials. Vol. 471 2014. pp. 324-328 (Applied Mechanics and Materials).
@inproceedings{72959d34b0924089a1cea9511df9edc2,
title = "Effect of nitriding cold roled and shot peening on automotive component fatigue life",
abstract = "The finite element modeling and analysis have been performed to investigate the effects of nitriding, cold rolled and shot peening on fatigue life of an automotive lower suspension arm component which fabricated of SAE1045 steel. The finite element analysis (FEA) results indicate a great effect for all surface finish parameters on fatigue life. It shows that nitriding increased the fatigue life of the component better than shot peening, while cold rolled effect was between them. In a nut shell, nitriding can be considered as the best surface treatment to improve the fatigue life of the automotive lower suspension arm which fabricated of SAE1045 steel.",
keywords = "Automotive components, Fatigue, Finite element analysis, Surface treatment",
author = "Kadhim, {N. A.} and N. Nikabdullah and Shahrum Abdullah and {Mohd Ihsan}, {Ahmad Kamal Ariffin}",
year = "2014",
doi = "10.4028/www.scientific.net/AMM.471.324",
language = "English",
isbn = "9783037859308",
volume = "471",
series = "Applied Mechanics and Materials",
pages = "324--328",
booktitle = "Applied Mechanics and Materials",

}

TY - GEN

T1 - Effect of nitriding cold roled and shot peening on automotive component fatigue life

AU - Kadhim, N. A.

AU - Nikabdullah, N.

AU - Abdullah, Shahrum

AU - Mohd Ihsan, Ahmad Kamal Ariffin

PY - 2014

Y1 - 2014

N2 - The finite element modeling and analysis have been performed to investigate the effects of nitriding, cold rolled and shot peening on fatigue life of an automotive lower suspension arm component which fabricated of SAE1045 steel. The finite element analysis (FEA) results indicate a great effect for all surface finish parameters on fatigue life. It shows that nitriding increased the fatigue life of the component better than shot peening, while cold rolled effect was between them. In a nut shell, nitriding can be considered as the best surface treatment to improve the fatigue life of the automotive lower suspension arm which fabricated of SAE1045 steel.

AB - The finite element modeling and analysis have been performed to investigate the effects of nitriding, cold rolled and shot peening on fatigue life of an automotive lower suspension arm component which fabricated of SAE1045 steel. The finite element analysis (FEA) results indicate a great effect for all surface finish parameters on fatigue life. It shows that nitriding increased the fatigue life of the component better than shot peening, while cold rolled effect was between them. In a nut shell, nitriding can be considered as the best surface treatment to improve the fatigue life of the automotive lower suspension arm which fabricated of SAE1045 steel.

KW - Automotive components

KW - Fatigue

KW - Finite element analysis

KW - Surface treatment

UR - http://www.scopus.com/inward/record.url?scp=84891530833&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84891530833&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.471.324

DO - 10.4028/www.scientific.net/AMM.471.324

M3 - Conference contribution

SN - 9783037859308

VL - 471

T3 - Applied Mechanics and Materials

SP - 324

EP - 328

BT - Applied Mechanics and Materials

ER -