Effect of Electropolishing on The Uniformity and Distribution of Nanopores of Anodic Aluminium Oxide Template

Siti Shafura A. Karim, Mohd Ambri Mohamed, Teck Yaw Tiong, Md Zain Ahmad Rifqi, Chang Fu Dee

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Anodic aluminum oxide (AAO) has been synthesized through anodization method. The effect of electropolishing on the growth of AAO template has been investigated. The surface roughness was measured by AFM. While the surface morphology and cross-sectional image were observed by FESEM. The statistical analysis was done using image J2 software to determine the pore diameter and pore distribution. The polished surface exhibited lower surface roughness of 4.42 nm compared to unpolished surface (16.45 nm). Formation of nanopores on top of polished surface was found to have higher uniformity. Apparently, good pore ordering was obtained for polished surface which resulted in high uniformity and welldistribution of nanopores at the bottom of AAO template. Polished surface also exhibited smaller standard deviation diameter of pores compared to unpolished surface.

Original languageEnglish
Title of host publicationISESD 2018 - International Symposium on Electronics and Smart Devices
Subtitle of host publicationSmart Devices for Big Data Analytic and Machine Learning
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)9781538666708
DOIs
Publication statusPublished - 7 Jan 2019
Event2018 International Symposium on Electronics and Smart Devices: Smart Devices for Big Data Analytic and Machine Learning, ISESD 2018 - Bandung, Indonesia
Duration: 23 Oct 201824 Oct 2018

Publication series

NameISESD 2018 - International Symposium on Electronics and Smart Devices: Smart Devices for Big Data Analytic and Machine Learning

Conference

Conference2018 International Symposium on Electronics and Smart Devices: Smart Devices for Big Data Analytic and Machine Learning, ISESD 2018
CountryIndonesia
CityBandung
Period23/10/1824/10/18

Fingerprint

electropolishing
Electrolytic polishing
Nanopore
Nanopores
Uniformity
Aluminum
Oxides
Template
templates
aluminum oxides
porosity
Surface Roughness
Surface roughness
surface roughness
Surface Morphology
Standard deviation
Statistical Analysis
Surface morphology
Statistical methods
statistical analysis

Keywords

  • anodic aluminum oxide
  • electropolishing
  • high uniformity
  • nanopores
  • well-distribution

ASJC Scopus subject areas

  • Artificial Intelligence
  • Hardware and Architecture
  • Electrical and Electronic Engineering
  • Control and Optimization
  • Instrumentation

Cite this

Karim, S. S. A., Mohamed, M. A., Tiong, T. Y., Ahmad Rifqi, M. Z., & Dee, C. F. (2019). Effect of Electropolishing on The Uniformity and Distribution of Nanopores of Anodic Aluminium Oxide Template. In ISESD 2018 - International Symposium on Electronics and Smart Devices: Smart Devices for Big Data Analytic and Machine Learning [8605465] (ISESD 2018 - International Symposium on Electronics and Smart Devices: Smart Devices for Big Data Analytic and Machine Learning). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ISESD.2018.8605465

Effect of Electropolishing on The Uniformity and Distribution of Nanopores of Anodic Aluminium Oxide Template. / Karim, Siti Shafura A.; Mohamed, Mohd Ambri; Tiong, Teck Yaw; Ahmad Rifqi, Md Zain; Dee, Chang Fu.

ISESD 2018 - International Symposium on Electronics and Smart Devices: Smart Devices for Big Data Analytic and Machine Learning. Institute of Electrical and Electronics Engineers Inc., 2019. 8605465 (ISESD 2018 - International Symposium on Electronics and Smart Devices: Smart Devices for Big Data Analytic and Machine Learning).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Karim, SSA, Mohamed, MA, Tiong, TY, Ahmad Rifqi, MZ & Dee, CF 2019, Effect of Electropolishing on The Uniformity and Distribution of Nanopores of Anodic Aluminium Oxide Template. in ISESD 2018 - International Symposium on Electronics and Smart Devices: Smart Devices for Big Data Analytic and Machine Learning., 8605465, ISESD 2018 - International Symposium on Electronics and Smart Devices: Smart Devices for Big Data Analytic and Machine Learning, Institute of Electrical and Electronics Engineers Inc., 2018 International Symposium on Electronics and Smart Devices: Smart Devices for Big Data Analytic and Machine Learning, ISESD 2018, Bandung, Indonesia, 23/10/18. https://doi.org/10.1109/ISESD.2018.8605465
Karim SSA, Mohamed MA, Tiong TY, Ahmad Rifqi MZ, Dee CF. Effect of Electropolishing on The Uniformity and Distribution of Nanopores of Anodic Aluminium Oxide Template. In ISESD 2018 - International Symposium on Electronics and Smart Devices: Smart Devices for Big Data Analytic and Machine Learning. Institute of Electrical and Electronics Engineers Inc. 2019. 8605465. (ISESD 2018 - International Symposium on Electronics and Smart Devices: Smart Devices for Big Data Analytic and Machine Learning). https://doi.org/10.1109/ISESD.2018.8605465
Karim, Siti Shafura A. ; Mohamed, Mohd Ambri ; Tiong, Teck Yaw ; Ahmad Rifqi, Md Zain ; Dee, Chang Fu. / Effect of Electropolishing on The Uniformity and Distribution of Nanopores of Anodic Aluminium Oxide Template. ISESD 2018 - International Symposium on Electronics and Smart Devices: Smart Devices for Big Data Analytic and Machine Learning. Institute of Electrical and Electronics Engineers Inc., 2019. (ISESD 2018 - International Symposium on Electronics and Smart Devices: Smart Devices for Big Data Analytic and Machine Learning).
@inproceedings{6437590d79ea4b089ab2a3926819d17e,
title = "Effect of Electropolishing on The Uniformity and Distribution of Nanopores of Anodic Aluminium Oxide Template",
abstract = "Anodic aluminum oxide (AAO) has been synthesized through anodization method. The effect of electropolishing on the growth of AAO template has been investigated. The surface roughness was measured by AFM. While the surface morphology and cross-sectional image were observed by FESEM. The statistical analysis was done using image J2 software to determine the pore diameter and pore distribution. The polished surface exhibited lower surface roughness of 4.42 nm compared to unpolished surface (16.45 nm). Formation of nanopores on top of polished surface was found to have higher uniformity. Apparently, good pore ordering was obtained for polished surface which resulted in high uniformity and welldistribution of nanopores at the bottom of AAO template. Polished surface also exhibited smaller standard deviation diameter of pores compared to unpolished surface.",
keywords = "anodic aluminum oxide, electropolishing, high uniformity, nanopores, well-distribution",
author = "Karim, {Siti Shafura A.} and Mohamed, {Mohd Ambri} and Tiong, {Teck Yaw} and {Ahmad Rifqi}, {Md Zain} and Dee, {Chang Fu}",
year = "2019",
month = "1",
day = "7",
doi = "10.1109/ISESD.2018.8605465",
language = "English",
series = "ISESD 2018 - International Symposium on Electronics and Smart Devices: Smart Devices for Big Data Analytic and Machine Learning",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
booktitle = "ISESD 2018 - International Symposium on Electronics and Smart Devices",
address = "United States",

}

TY - GEN

T1 - Effect of Electropolishing on The Uniformity and Distribution of Nanopores of Anodic Aluminium Oxide Template

AU - Karim, Siti Shafura A.

AU - Mohamed, Mohd Ambri

AU - Tiong, Teck Yaw

AU - Ahmad Rifqi, Md Zain

AU - Dee, Chang Fu

PY - 2019/1/7

Y1 - 2019/1/7

N2 - Anodic aluminum oxide (AAO) has been synthesized through anodization method. The effect of electropolishing on the growth of AAO template has been investigated. The surface roughness was measured by AFM. While the surface morphology and cross-sectional image were observed by FESEM. The statistical analysis was done using image J2 software to determine the pore diameter and pore distribution. The polished surface exhibited lower surface roughness of 4.42 nm compared to unpolished surface (16.45 nm). Formation of nanopores on top of polished surface was found to have higher uniformity. Apparently, good pore ordering was obtained for polished surface which resulted in high uniformity and welldistribution of nanopores at the bottom of AAO template. Polished surface also exhibited smaller standard deviation diameter of pores compared to unpolished surface.

AB - Anodic aluminum oxide (AAO) has been synthesized through anodization method. The effect of electropolishing on the growth of AAO template has been investigated. The surface roughness was measured by AFM. While the surface morphology and cross-sectional image were observed by FESEM. The statistical analysis was done using image J2 software to determine the pore diameter and pore distribution. The polished surface exhibited lower surface roughness of 4.42 nm compared to unpolished surface (16.45 nm). Formation of nanopores on top of polished surface was found to have higher uniformity. Apparently, good pore ordering was obtained for polished surface which resulted in high uniformity and welldistribution of nanopores at the bottom of AAO template. Polished surface also exhibited smaller standard deviation diameter of pores compared to unpolished surface.

KW - anodic aluminum oxide

KW - electropolishing

KW - high uniformity

KW - nanopores

KW - well-distribution

UR - http://www.scopus.com/inward/record.url?scp=85061904359&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85061904359&partnerID=8YFLogxK

U2 - 10.1109/ISESD.2018.8605465

DO - 10.1109/ISESD.2018.8605465

M3 - Conference contribution

T3 - ISESD 2018 - International Symposium on Electronics and Smart Devices: Smart Devices for Big Data Analytic and Machine Learning

BT - ISESD 2018 - International Symposium on Electronics and Smart Devices

PB - Institute of Electrical and Electronics Engineers Inc.

ER -