Effect of different lamination temperature on the quality of solar module

M. A M Sobri, Nowshad Amin, Suhaila Sepeai, Azami Zaharim, Kamaruzzaman Sopian

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This work is to determine the most suitable temperature for the small scale solar module. The main problem most of the industry face when they did laminate solar module is that the appearance of bubbles in the module. We use a small scale solar module as our sample and test it on bottom side heat source (BSHS) and upper side heat source (USHS) laminator. Initially we start by using a high temperature and we gradually decrease the temperature until there almost no more bubbles within the modules. The solar cell module appeared free of bubbles when the lamination temperature was set to 133°C. The appearance of the module is still fine even after repeat the processes by using the same temperature.

Original languageEnglish
Title of host publicationProceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09
Pages272-276
Number of pages5
Publication statusPublished - 2009
Event3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, 3rd WSEAS International Conference on Renewable Energy Sources, RES '09, 3rd WSEAS International Conference on Waste Management, WWAI '09 - Canary Islands
Duration: 1 Jul 20093 Jul 2009

Other

Other3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, 3rd WSEAS International Conference on Renewable Energy Sources, RES '09, 3rd WSEAS International Conference on Waste Management, WWAI '09
CityCanary Islands
Period1/7/093/7/09

Fingerprint

lamination
bubble
heat source
temperature
Temperature
Laminates
Solar cells
effect
industry
Industry
Hot Temperature

Keywords

  • BSHS and USHS laminator
  • Crystalline silicon solar cells
  • EVA
  • TPT

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Renewable Energy, Sustainability and the Environment
  • Management, Monitoring, Policy and Law
  • Waste Management and Disposal

Cite this

Sobri, M. A. M., Amin, N., Sepeai, S., Zaharim, A., & Sopian, K. (2009). Effect of different lamination temperature on the quality of solar module. In Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09 (pp. 272-276)

Effect of different lamination temperature on the quality of solar module. / Sobri, M. A M; Amin, Nowshad; Sepeai, Suhaila; Zaharim, Azami; Sopian, Kamaruzzaman.

Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09. 2009. p. 272-276.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sobri, MAM, Amin, N, Sepeai, S, Zaharim, A & Sopian, K 2009, Effect of different lamination temperature on the quality of solar module. in Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09. pp. 272-276, 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, 3rd WSEAS International Conference on Renewable Energy Sources, RES '09, 3rd WSEAS International Conference on Waste Management, WWAI '09, Canary Islands, 1/7/09.
Sobri MAM, Amin N, Sepeai S, Zaharim A, Sopian K. Effect of different lamination temperature on the quality of solar module. In Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09. 2009. p. 272-276
Sobri, M. A M ; Amin, Nowshad ; Sepeai, Suhaila ; Zaharim, Azami ; Sopian, Kamaruzzaman. / Effect of different lamination temperature on the quality of solar module. Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09. 2009. pp. 272-276
@inproceedings{58d4f9c6f87e455dbcf26d5440cfa61d,
title = "Effect of different lamination temperature on the quality of solar module",
abstract = "This work is to determine the most suitable temperature for the small scale solar module. The main problem most of the industry face when they did laminate solar module is that the appearance of bubbles in the module. We use a small scale solar module as our sample and test it on bottom side heat source (BSHS) and upper side heat source (USHS) laminator. Initially we start by using a high temperature and we gradually decrease the temperature until there almost no more bubbles within the modules. The solar cell module appeared free of bubbles when the lamination temperature was set to 133°C. The appearance of the module is still fine even after repeat the processes by using the same temperature.",
keywords = "BSHS and USHS laminator, Crystalline silicon solar cells, EVA, TPT",
author = "Sobri, {M. A M} and Nowshad Amin and Suhaila Sepeai and Azami Zaharim and Kamaruzzaman Sopian",
year = "2009",
language = "English",
isbn = "9789604740932",
pages = "272--276",
booktitle = "Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09",

}

TY - GEN

T1 - Effect of different lamination temperature on the quality of solar module

AU - Sobri, M. A M

AU - Amin, Nowshad

AU - Sepeai, Suhaila

AU - Zaharim, Azami

AU - Sopian, Kamaruzzaman

PY - 2009

Y1 - 2009

N2 - This work is to determine the most suitable temperature for the small scale solar module. The main problem most of the industry face when they did laminate solar module is that the appearance of bubbles in the module. We use a small scale solar module as our sample and test it on bottom side heat source (BSHS) and upper side heat source (USHS) laminator. Initially we start by using a high temperature and we gradually decrease the temperature until there almost no more bubbles within the modules. The solar cell module appeared free of bubbles when the lamination temperature was set to 133°C. The appearance of the module is still fine even after repeat the processes by using the same temperature.

AB - This work is to determine the most suitable temperature for the small scale solar module. The main problem most of the industry face when they did laminate solar module is that the appearance of bubbles in the module. We use a small scale solar module as our sample and test it on bottom side heat source (BSHS) and upper side heat source (USHS) laminator. Initially we start by using a high temperature and we gradually decrease the temperature until there almost no more bubbles within the modules. The solar cell module appeared free of bubbles when the lamination temperature was set to 133°C. The appearance of the module is still fine even after repeat the processes by using the same temperature.

KW - BSHS and USHS laminator

KW - Crystalline silicon solar cells

KW - EVA

KW - TPT

UR - http://www.scopus.com/inward/record.url?scp=78149335668&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78149335668&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:78149335668

SN - 9789604740932

SP - 272

EP - 276

BT - Proceedings of the 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education, EPESE '09, Renewable Energy Sources, RES '09, Waste Management, WWAI '09

ER -