Effect of different filler metals towards welding of AA6061 Al Alloy by X-ray CT scan

C. L. Nur Azida, Azman Jalar @ Jalil, Norinsan Kamil Othman, N. M. Rashdi, Md Z. Ibel

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

AA6061 Aluminum alloy welded joint using two different filler metals were studied by using X-ray CT-Scan. The filler metals ER 4043 and ER 5356 were used in this present work in order to investigate the effect of using different filler metals on the welded joint quality of AA 6061 aluminum alloy in welded zone microstructure. Gas metal arc welding (GMAW) technique and V grove butt joint with four layers and five passes welded joint were performed. From this investigation, it is found that AA6061 with ER 4043 showed less distribution of porosity compared to AA6061 with ER 5356 welded joint confirmed by X-ray Ct-Scan. The decreasing of porosities and presence of very fine grains in weld region area with ER 5356 compared to ER 4043 will be discussed in term of microstructure analysis.

Original languageEnglish
Title of host publicationAdvanced Materials Research
Pages1402-1405
Number of pages4
Volume146-147
DOIs
Publication statusPublished - 2011
Event2010 International Conference on Advances in Materials and Manufacturing Processes, ICAMMP 2010 - Shenzhen
Duration: 6 Nov 20108 Nov 2010

Publication series

NameAdvanced Materials Research
Volume146-147
ISSN (Print)10226680

Other

Other2010 International Conference on Advances in Materials and Manufacturing Processes, ICAMMP 2010
CityShenzhen
Period6/11/108/11/10

Fingerprint

Filler metals
Computerized tomography
Welding
Welds
X rays
Aluminum alloys
Porosity
Gas metal arc welding
Microstructure

Keywords

  • AA6061 al alloy
  • Filler metal and X-ray CT Scan
  • Gas metal arc welding

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Nur Azida, C. L., Jalar @ Jalil, A., Othman, N. K., Rashdi, N. M., & Ibel, M. Z. (2011). Effect of different filler metals towards welding of AA6061 Al Alloy by X-ray CT scan. In Advanced Materials Research (Vol. 146-147, pp. 1402-1405). (Advanced Materials Research; Vol. 146-147). https://doi.org/10.4028/www.scientific.net/AMR.146-147.1402

Effect of different filler metals towards welding of AA6061 Al Alloy by X-ray CT scan. / Nur Azida, C. L.; Jalar @ Jalil, Azman; Othman, Norinsan Kamil; Rashdi, N. M.; Ibel, Md Z.

Advanced Materials Research. Vol. 146-147 2011. p. 1402-1405 (Advanced Materials Research; Vol. 146-147).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nur Azida, CL, Jalar @ Jalil, A, Othman, NK, Rashdi, NM & Ibel, MZ 2011, Effect of different filler metals towards welding of AA6061 Al Alloy by X-ray CT scan. in Advanced Materials Research. vol. 146-147, Advanced Materials Research, vol. 146-147, pp. 1402-1405, 2010 International Conference on Advances in Materials and Manufacturing Processes, ICAMMP 2010, Shenzhen, 6/11/10. https://doi.org/10.4028/www.scientific.net/AMR.146-147.1402
Nur Azida CL, Jalar @ Jalil A, Othman NK, Rashdi NM, Ibel MZ. Effect of different filler metals towards welding of AA6061 Al Alloy by X-ray CT scan. In Advanced Materials Research. Vol. 146-147. 2011. p. 1402-1405. (Advanced Materials Research). https://doi.org/10.4028/www.scientific.net/AMR.146-147.1402
Nur Azida, C. L. ; Jalar @ Jalil, Azman ; Othman, Norinsan Kamil ; Rashdi, N. M. ; Ibel, Md Z. / Effect of different filler metals towards welding of AA6061 Al Alloy by X-ray CT scan. Advanced Materials Research. Vol. 146-147 2011. pp. 1402-1405 (Advanced Materials Research).
@inproceedings{5e8383d7162341b6b72b49a3ff9fff1c,
title = "Effect of different filler metals towards welding of AA6061 Al Alloy by X-ray CT scan",
abstract = "AA6061 Aluminum alloy welded joint using two different filler metals were studied by using X-ray CT-Scan. The filler metals ER 4043 and ER 5356 were used in this present work in order to investigate the effect of using different filler metals on the welded joint quality of AA 6061 aluminum alloy in welded zone microstructure. Gas metal arc welding (GMAW) technique and V grove butt joint with four layers and five passes welded joint were performed. From this investigation, it is found that AA6061 with ER 4043 showed less distribution of porosity compared to AA6061 with ER 5356 welded joint confirmed by X-ray Ct-Scan. The decreasing of porosities and presence of very fine grains in weld region area with ER 5356 compared to ER 4043 will be discussed in term of microstructure analysis.",
keywords = "AA6061 al alloy, Filler metal and X-ray CT Scan, Gas metal arc welding",
author = "{Nur Azida}, {C. L.} and {Jalar @ Jalil}, Azman and Othman, {Norinsan Kamil} and Rashdi, {N. M.} and Ibel, {Md Z.}",
year = "2011",
doi = "10.4028/www.scientific.net/AMR.146-147.1402",
language = "English",
isbn = "9780878492008",
volume = "146-147",
series = "Advanced Materials Research",
pages = "1402--1405",
booktitle = "Advanced Materials Research",

}

TY - GEN

T1 - Effect of different filler metals towards welding of AA6061 Al Alloy by X-ray CT scan

AU - Nur Azida, C. L.

AU - Jalar @ Jalil, Azman

AU - Othman, Norinsan Kamil

AU - Rashdi, N. M.

AU - Ibel, Md Z.

PY - 2011

Y1 - 2011

N2 - AA6061 Aluminum alloy welded joint using two different filler metals were studied by using X-ray CT-Scan. The filler metals ER 4043 and ER 5356 were used in this present work in order to investigate the effect of using different filler metals on the welded joint quality of AA 6061 aluminum alloy in welded zone microstructure. Gas metal arc welding (GMAW) technique and V grove butt joint with four layers and five passes welded joint were performed. From this investigation, it is found that AA6061 with ER 4043 showed less distribution of porosity compared to AA6061 with ER 5356 welded joint confirmed by X-ray Ct-Scan. The decreasing of porosities and presence of very fine grains in weld region area with ER 5356 compared to ER 4043 will be discussed in term of microstructure analysis.

AB - AA6061 Aluminum alloy welded joint using two different filler metals were studied by using X-ray CT-Scan. The filler metals ER 4043 and ER 5356 were used in this present work in order to investigate the effect of using different filler metals on the welded joint quality of AA 6061 aluminum alloy in welded zone microstructure. Gas metal arc welding (GMAW) technique and V grove butt joint with four layers and five passes welded joint were performed. From this investigation, it is found that AA6061 with ER 4043 showed less distribution of porosity compared to AA6061 with ER 5356 welded joint confirmed by X-ray Ct-Scan. The decreasing of porosities and presence of very fine grains in weld region area with ER 5356 compared to ER 4043 will be discussed in term of microstructure analysis.

KW - AA6061 al alloy

KW - Filler metal and X-ray CT Scan

KW - Gas metal arc welding

UR - http://www.scopus.com/inward/record.url?scp=78650672130&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78650672130&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMR.146-147.1402

DO - 10.4028/www.scientific.net/AMR.146-147.1402

M3 - Conference contribution

SN - 9780878492008

VL - 146-147

T3 - Advanced Materials Research

SP - 1402

EP - 1405

BT - Advanced Materials Research

ER -