Effect of Cu particles precipitation on wear behaviour of Fe-3mass%Cu under dry sliding condition

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Effect of peak-aged and over-aged Cu particles on wear behaviour of ferritic iron was investigated by means of Pin-on-Disc wear test under dry sliding condition. It was found that hardness of the peak-aged sample was higher than the over-aged sample. The specific wear rates of peak-aged samples were in the range of 0.20 × 10-4 to 0.89 × 10-4 mm3/(Nm) while the over-aged samples were in the range of 0.21 × 10-4 to 1.29 × 10-4 mm3/(Nm). Although both samples possessed moderate wear behaviours, the peak-aged samples had better wear resistance. Scanning Electron Microscopy observation found that most wear mechanism were due to plastic ploughing phenomenon. Transferred materials from the counterface tool was also proven by Energy Dispersive Spectroscopy test. However, the roughness test showed that the peak-aged sample surface was finer than the over-aged sample surface. Average roughness of peak-aged samples were in the range of 0.49 to 1.79 μm while the over-aged samples were in the range of 3.28 to 4.02 μm. Hence, it can be concluded that the peak-aged Cu particles can improve the wear resistance of steel.

Original languageEnglish
Title of host publicationKey Engineering Materials
Pages1224-1229
Number of pages6
Volume462-463
DOIs
Publication statusPublished - 2011
Event8th International Conference on Fracture and Strength of Solids 2010, FEOFS2010 - Kuala Lumpur
Duration: 7 Jun 20109 Jun 2010

Publication series

NameKey Engineering Materials
Volume462-463
ISSN (Print)10139826

Other

Other8th International Conference on Fracture and Strength of Solids 2010, FEOFS2010
CityKuala Lumpur
Period7/6/109/6/10

Fingerprint

Wear of materials
Wear resistance
Surface roughness
Steel
Energy dispersive spectroscopy
Iron
Hardness
Plastics
Scanning electron microscopy

Keywords

  • Cu particle
  • Dry sliding
  • Ferritic iron
  • Over-aged
  • Peak-aged
  • Wear resistance
  • Worn surface

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Agung, I., Syarif, J., Ghazali, M. J., & Sajuri, Z. (2011). Effect of Cu particles precipitation on wear behaviour of Fe-3mass%Cu under dry sliding condition. In Key Engineering Materials (Vol. 462-463, pp. 1224-1229). (Key Engineering Materials; Vol. 462-463). https://doi.org/10.4028/www.scientific.net/KEM.462-463.1224

Effect of Cu particles precipitation on wear behaviour of Fe-3mass%Cu under dry sliding condition. / Agung, I.; Syarif, J.; Ghazali, Mariyam Jameelah; Sajuri, Zainuddin.

Key Engineering Materials. Vol. 462-463 2011. p. 1224-1229 (Key Engineering Materials; Vol. 462-463).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Agung, I, Syarif, J, Ghazali, MJ & Sajuri, Z 2011, Effect of Cu particles precipitation on wear behaviour of Fe-3mass%Cu under dry sliding condition. in Key Engineering Materials. vol. 462-463, Key Engineering Materials, vol. 462-463, pp. 1224-1229, 8th International Conference on Fracture and Strength of Solids 2010, FEOFS2010, Kuala Lumpur, 7/6/10. https://doi.org/10.4028/www.scientific.net/KEM.462-463.1224
Agung, I. ; Syarif, J. ; Ghazali, Mariyam Jameelah ; Sajuri, Zainuddin. / Effect of Cu particles precipitation on wear behaviour of Fe-3mass%Cu under dry sliding condition. Key Engineering Materials. Vol. 462-463 2011. pp. 1224-1229 (Key Engineering Materials).
@inproceedings{6509e86fa0b54c7b9eac5ce62cbf7429,
title = "Effect of Cu particles precipitation on wear behaviour of Fe-3mass{\%}Cu under dry sliding condition",
abstract = "Effect of peak-aged and over-aged Cu particles on wear behaviour of ferritic iron was investigated by means of Pin-on-Disc wear test under dry sliding condition. It was found that hardness of the peak-aged sample was higher than the over-aged sample. The specific wear rates of peak-aged samples were in the range of 0.20 × 10-4 to 0.89 × 10-4 mm3/(Nm) while the over-aged samples were in the range of 0.21 × 10-4 to 1.29 × 10-4 mm3/(Nm). Although both samples possessed moderate wear behaviours, the peak-aged samples had better wear resistance. Scanning Electron Microscopy observation found that most wear mechanism were due to plastic ploughing phenomenon. Transferred materials from the counterface tool was also proven by Energy Dispersive Spectroscopy test. However, the roughness test showed that the peak-aged sample surface was finer than the over-aged sample surface. Average roughness of peak-aged samples were in the range of 0.49 to 1.79 μm while the over-aged samples were in the range of 3.28 to 4.02 μm. Hence, it can be concluded that the peak-aged Cu particles can improve the wear resistance of steel.",
keywords = "Cu particle, Dry sliding, Ferritic iron, Over-aged, Peak-aged, Wear resistance, Worn surface",
author = "I. Agung and J. Syarif and Ghazali, {Mariyam Jameelah} and Zainuddin Sajuri",
year = "2011",
doi = "10.4028/www.scientific.net/KEM.462-463.1224",
language = "English",
isbn = "9780878492107",
volume = "462-463",
series = "Key Engineering Materials",
pages = "1224--1229",
booktitle = "Key Engineering Materials",

}

TY - GEN

T1 - Effect of Cu particles precipitation on wear behaviour of Fe-3mass%Cu under dry sliding condition

AU - Agung, I.

AU - Syarif, J.

AU - Ghazali, Mariyam Jameelah

AU - Sajuri, Zainuddin

PY - 2011

Y1 - 2011

N2 - Effect of peak-aged and over-aged Cu particles on wear behaviour of ferritic iron was investigated by means of Pin-on-Disc wear test under dry sliding condition. It was found that hardness of the peak-aged sample was higher than the over-aged sample. The specific wear rates of peak-aged samples were in the range of 0.20 × 10-4 to 0.89 × 10-4 mm3/(Nm) while the over-aged samples were in the range of 0.21 × 10-4 to 1.29 × 10-4 mm3/(Nm). Although both samples possessed moderate wear behaviours, the peak-aged samples had better wear resistance. Scanning Electron Microscopy observation found that most wear mechanism were due to plastic ploughing phenomenon. Transferred materials from the counterface tool was also proven by Energy Dispersive Spectroscopy test. However, the roughness test showed that the peak-aged sample surface was finer than the over-aged sample surface. Average roughness of peak-aged samples were in the range of 0.49 to 1.79 μm while the over-aged samples were in the range of 3.28 to 4.02 μm. Hence, it can be concluded that the peak-aged Cu particles can improve the wear resistance of steel.

AB - Effect of peak-aged and over-aged Cu particles on wear behaviour of ferritic iron was investigated by means of Pin-on-Disc wear test under dry sliding condition. It was found that hardness of the peak-aged sample was higher than the over-aged sample. The specific wear rates of peak-aged samples were in the range of 0.20 × 10-4 to 0.89 × 10-4 mm3/(Nm) while the over-aged samples were in the range of 0.21 × 10-4 to 1.29 × 10-4 mm3/(Nm). Although both samples possessed moderate wear behaviours, the peak-aged samples had better wear resistance. Scanning Electron Microscopy observation found that most wear mechanism were due to plastic ploughing phenomenon. Transferred materials from the counterface tool was also proven by Energy Dispersive Spectroscopy test. However, the roughness test showed that the peak-aged sample surface was finer than the over-aged sample surface. Average roughness of peak-aged samples were in the range of 0.49 to 1.79 μm while the over-aged samples were in the range of 3.28 to 4.02 μm. Hence, it can be concluded that the peak-aged Cu particles can improve the wear resistance of steel.

KW - Cu particle

KW - Dry sliding

KW - Ferritic iron

KW - Over-aged

KW - Peak-aged

KW - Wear resistance

KW - Worn surface

UR - http://www.scopus.com/inward/record.url?scp=79551500619&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79551500619&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/KEM.462-463.1224

DO - 10.4028/www.scientific.net/KEM.462-463.1224

M3 - Conference contribution

AN - SCOPUS:79551500619

SN - 9780878492107

VL - 462-463

T3 - Key Engineering Materials

SP - 1224

EP - 1229

BT - Key Engineering Materials

ER -