Effect of carbonization temperature on the physical and electrochemical properties of supercapacitor electrode from fibers of oil palm empty fruit bunches

M. M. Ishak, Mohamad Deraman, I. A. Talib, N. H. Basri, Awitdrus, R. Farma, E. Taer, Ramli Omar, N. S.M. Nor, B. N.M. Dolah

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Self-adhesive carbon grains (SACG) was prepared from fibers of oil palm empty fruit bunches. The SACG green monoliths were carbonized in N 2 environment at 400, 500, 600 and 700°C to produce carbon monoliths labeled as CM1, CM2, CM3 and CM4 respectively. The CMs were activated in CO 2 surrounding at 800°C for 1 hour to produce activated carbon monolith electrodes (ACM1, ACM2, ACM3 and ACM4). The physical properties of the CMs and ACMs were investigated using X-ray diffraction, field emission scanning electron microscopy (FESEM) and N 2 adsorption-desorption isotherm techniques. ACMs were used as electrode to fabricate symmetry supercapacitor cells and the cells' performances were investigated using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) standard techniques. In this paper we report the physical and electrochemical properties of the ACM electrodes by analyzing the influence of the carbonization temperature on these properties.

Original languageEnglish
Title of host publication5th Asian Physics Symposium, APS 2012
EditorsSparisoma Viridi, Khairul Basar, Ferry Iskandar, Bobby Eka Gunara, Wahyu Srigutomo
PublisherAmerican Institute of Physics Inc.
ISBN (Electronic)9780735412989
DOIs
Publication statusPublished - 16 Apr 2015
Event5th Asian Physics Symposium, APS 2012 - Bandung, Indonesia
Duration: 10 Jul 201212 Jul 2012

Publication series

NameAIP Conference Proceedings
Volume1656
ISSN (Print)0094-243X
ISSN (Electronic)1551-7616

Conference

Conference5th Asian Physics Symposium, APS 2012
CountryIndonesia
CityBandung
Period10/7/1212/7/12

Fingerprint

fruits
carbonization
electrochemical capacitors
physical properties
oils
adhesives
fibers
electrodes
carbon
activated carbon
cells
temperature
field emission
isotherms
desorption
impedance
scanning electron microscopy
adsorption
symmetry
diffraction

Keywords

  • Activated carbon monoliths
  • Electrochemical properties
  • Microstructure
  • Porosity
  • Supercapacitor

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Ishak, M. M., Deraman, M., Talib, I. A., Basri, N. H., Awitdrus, Farma, R., ... Dolah, B. N. M. (2015). Effect of carbonization temperature on the physical and electrochemical properties of supercapacitor electrode from fibers of oil palm empty fruit bunches. In S. Viridi, K. Basar, F. Iskandar, B. E. Gunara, & W. Srigutomo (Eds.), 5th Asian Physics Symposium, APS 2012 [4917094] (AIP Conference Proceedings; Vol. 1656). American Institute of Physics Inc.. https://doi.org/10.1063/1.4917094

Effect of carbonization temperature on the physical and electrochemical properties of supercapacitor electrode from fibers of oil palm empty fruit bunches. / Ishak, M. M.; Deraman, Mohamad; Talib, I. A.; Basri, N. H.; Awitdrus; Farma, R.; Taer, E.; Omar, Ramli; Nor, N. S.M.; Dolah, B. N.M.

5th Asian Physics Symposium, APS 2012. ed. / Sparisoma Viridi; Khairul Basar; Ferry Iskandar; Bobby Eka Gunara; Wahyu Srigutomo. American Institute of Physics Inc., 2015. 4917094 (AIP Conference Proceedings; Vol. 1656).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ishak, MM, Deraman, M, Talib, IA, Basri, NH, Awitdrus, Farma, R, Taer, E, Omar, R, Nor, NSM & Dolah, BNM 2015, Effect of carbonization temperature on the physical and electrochemical properties of supercapacitor electrode from fibers of oil palm empty fruit bunches. in S Viridi, K Basar, F Iskandar, BE Gunara & W Srigutomo (eds), 5th Asian Physics Symposium, APS 2012., 4917094, AIP Conference Proceedings, vol. 1656, American Institute of Physics Inc., 5th Asian Physics Symposium, APS 2012, Bandung, Indonesia, 10/7/12. https://doi.org/10.1063/1.4917094
Ishak MM, Deraman M, Talib IA, Basri NH, Awitdrus, Farma R et al. Effect of carbonization temperature on the physical and electrochemical properties of supercapacitor electrode from fibers of oil palm empty fruit bunches. In Viridi S, Basar K, Iskandar F, Gunara BE, Srigutomo W, editors, 5th Asian Physics Symposium, APS 2012. American Institute of Physics Inc. 2015. 4917094. (AIP Conference Proceedings). https://doi.org/10.1063/1.4917094
Ishak, M. M. ; Deraman, Mohamad ; Talib, I. A. ; Basri, N. H. ; Awitdrus ; Farma, R. ; Taer, E. ; Omar, Ramli ; Nor, N. S.M. ; Dolah, B. N.M. / Effect of carbonization temperature on the physical and electrochemical properties of supercapacitor electrode from fibers of oil palm empty fruit bunches. 5th Asian Physics Symposium, APS 2012. editor / Sparisoma Viridi ; Khairul Basar ; Ferry Iskandar ; Bobby Eka Gunara ; Wahyu Srigutomo. American Institute of Physics Inc., 2015. (AIP Conference Proceedings).
@inproceedings{e021c010e7b3442891829d01ecfadd7b,
title = "Effect of carbonization temperature on the physical and electrochemical properties of supercapacitor electrode from fibers of oil palm empty fruit bunches",
abstract = "Self-adhesive carbon grains (SACG) was prepared from fibers of oil palm empty fruit bunches. The SACG green monoliths were carbonized in N 2 environment at 400, 500, 600 and 700°C to produce carbon monoliths labeled as CM1, CM2, CM3 and CM4 respectively. The CMs were activated in CO 2 surrounding at 800°C for 1 hour to produce activated carbon monolith electrodes (ACM1, ACM2, ACM3 and ACM4). The physical properties of the CMs and ACMs were investigated using X-ray diffraction, field emission scanning electron microscopy (FESEM) and N 2 adsorption-desorption isotherm techniques. ACMs were used as electrode to fabricate symmetry supercapacitor cells and the cells' performances were investigated using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) standard techniques. In this paper we report the physical and electrochemical properties of the ACM electrodes by analyzing the influence of the carbonization temperature on these properties.",
keywords = "Activated carbon monoliths, Electrochemical properties, Microstructure, Porosity, Supercapacitor",
author = "Ishak, {M. M.} and Mohamad Deraman and Talib, {I. A.} and Basri, {N. H.} and Awitdrus and R. Farma and E. Taer and Ramli Omar and Nor, {N. S.M.} and Dolah, {B. N.M.}",
year = "2015",
month = "4",
day = "16",
doi = "10.1063/1.4917094",
language = "English",
series = "AIP Conference Proceedings",
publisher = "American Institute of Physics Inc.",
editor = "Sparisoma Viridi and Khairul Basar and Ferry Iskandar and Gunara, {Bobby Eka} and Wahyu Srigutomo",
booktitle = "5th Asian Physics Symposium, APS 2012",

}

TY - GEN

T1 - Effect of carbonization temperature on the physical and electrochemical properties of supercapacitor electrode from fibers of oil palm empty fruit bunches

AU - Ishak, M. M.

AU - Deraman, Mohamad

AU - Talib, I. A.

AU - Basri, N. H.

AU - Awitdrus,

AU - Farma, R.

AU - Taer, E.

AU - Omar, Ramli

AU - Nor, N. S.M.

AU - Dolah, B. N.M.

PY - 2015/4/16

Y1 - 2015/4/16

N2 - Self-adhesive carbon grains (SACG) was prepared from fibers of oil palm empty fruit bunches. The SACG green monoliths were carbonized in N 2 environment at 400, 500, 600 and 700°C to produce carbon monoliths labeled as CM1, CM2, CM3 and CM4 respectively. The CMs were activated in CO 2 surrounding at 800°C for 1 hour to produce activated carbon monolith electrodes (ACM1, ACM2, ACM3 and ACM4). The physical properties of the CMs and ACMs were investigated using X-ray diffraction, field emission scanning electron microscopy (FESEM) and N 2 adsorption-desorption isotherm techniques. ACMs were used as electrode to fabricate symmetry supercapacitor cells and the cells' performances were investigated using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) standard techniques. In this paper we report the physical and electrochemical properties of the ACM electrodes by analyzing the influence of the carbonization temperature on these properties.

AB - Self-adhesive carbon grains (SACG) was prepared from fibers of oil palm empty fruit bunches. The SACG green monoliths were carbonized in N 2 environment at 400, 500, 600 and 700°C to produce carbon monoliths labeled as CM1, CM2, CM3 and CM4 respectively. The CMs were activated in CO 2 surrounding at 800°C for 1 hour to produce activated carbon monolith electrodes (ACM1, ACM2, ACM3 and ACM4). The physical properties of the CMs and ACMs were investigated using X-ray diffraction, field emission scanning electron microscopy (FESEM) and N 2 adsorption-desorption isotherm techniques. ACMs were used as electrode to fabricate symmetry supercapacitor cells and the cells' performances were investigated using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) standard techniques. In this paper we report the physical and electrochemical properties of the ACM electrodes by analyzing the influence of the carbonization temperature on these properties.

KW - Activated carbon monoliths

KW - Electrochemical properties

KW - Microstructure

KW - Porosity

KW - Supercapacitor

UR - http://www.scopus.com/inward/record.url?scp=84959901224&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84959901224&partnerID=8YFLogxK

U2 - 10.1063/1.4917094

DO - 10.1063/1.4917094

M3 - Conference contribution

AN - SCOPUS:84959901224

T3 - AIP Conference Proceedings

BT - 5th Asian Physics Symposium, APS 2012

A2 - Viridi, Sparisoma

A2 - Basar, Khairul

A2 - Iskandar, Ferry

A2 - Gunara, Bobby Eka

A2 - Srigutomo, Wahyu

PB - American Institute of Physics Inc.

ER -