Development on simulation of small structure modal analysis method using piezoelectric film sensor

Mohd Irman Ramli, Mohd. Zaki Nuawi, Shahrum Abdullah, Mohammad Rasidi Mohammad Rasani, Kho Ko Seng, Muhamad Arif Fadli Ahmad

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

This study is conducted to determine the vibration or modal parameters namely natural frequencies and mode shapes of aluminum 6061 (AL6061). The work to inspect the parameters is done by conducting a free dynamic vibration analysis. Aluminum 6061 is chosen as the experimental specimen mainly because of its wide application in industries such as automotive, mainly in manufacturing of automobile frames. Theoretically and proven practically, if a component vibrates with a frequency that is coherent with the component's natural frequency, resonance frequency will occur and structural failure might emerged. Modal analysis study was conducted by both simulation and experimental approaches. Two sensors i.e. piezoelectric film and acelerometer were used in this study. The result obtained from accelerometer showed that the frequencies for mode shape 1, 2 and 3 for the square-shaped aluminum specimen were 195 Hz, 557Hz and 825Hz respectively. The result obtained from piezoelectric film on the other hand showed that the frequencies for mode shape 1, 2 and 3 for the square-shaped specimen were 205.33Hz, 609.33Hz and 904.33Hz respectively. Finally, the result captured from the simulation described that the frequencies for mode shape 1, 2 and 3 for the square-shaped were 191.89Hz, 542.34Hz and 766.18Hz respectively. Based on the result analysis, one could determine the natural frequency and mode shape of the aluminum. As a conclusion, structural failure due to resonance frequency can be avoided by investigating the natural frequency of the integrated components.

Original languageEnglish
Title of host publicationICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics
PublisherInternational Institute of Acoustics and Vibrations
ISBN (Electronic)9789609922623
Publication statusPublished - 2016
Event23rd International Congress on Sound and Vibration, ICSV 2016 - Athens, Greece
Duration: 10 Jul 201614 Jul 2016

Other

Other23rd International Congress on Sound and Vibration, ICSV 2016
CountryGreece
CityAthens
Period10/7/1614/7/16

Fingerprint

Modal analysis
modal response
Natural frequencies
Aluminum
resonant frequencies
sensors
Sensors
structural failure
aluminum
simulation
Automobile frames
Vibration analysis
Accelerometers
Vibrations (mechanical)
vibration
automobiles
accelerometers
manufacturing
industries
conduction

ASJC Scopus subject areas

  • Mechanical Engineering
  • Safety, Risk, Reliability and Quality
  • Acoustics and Ultrasonics

Cite this

Ramli, M. I., Nuawi, M. Z., Abdullah, S., Mohammad Rasani, M. R., Seng, K. K., & Ahmad, M. A. F. (2016). Development on simulation of small structure modal analysis method using piezoelectric film sensor. In ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics International Institute of Acoustics and Vibrations.

Development on simulation of small structure modal analysis method using piezoelectric film sensor. / Ramli, Mohd Irman; Nuawi, Mohd. Zaki; Abdullah, Shahrum; Mohammad Rasani, Mohammad Rasidi; Seng, Kho Ko; Ahmad, Muhamad Arif Fadli.

ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics. International Institute of Acoustics and Vibrations, 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ramli, MI, Nuawi, MZ, Abdullah, S, Mohammad Rasani, MR, Seng, KK & Ahmad, MAF 2016, Development on simulation of small structure modal analysis method using piezoelectric film sensor. in ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics. International Institute of Acoustics and Vibrations, 23rd International Congress on Sound and Vibration, ICSV 2016, Athens, Greece, 10/7/16.
Ramli MI, Nuawi MZ, Abdullah S, Mohammad Rasani MR, Seng KK, Ahmad MAF. Development on simulation of small structure modal analysis method using piezoelectric film sensor. In ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics. International Institute of Acoustics and Vibrations. 2016
Ramli, Mohd Irman ; Nuawi, Mohd. Zaki ; Abdullah, Shahrum ; Mohammad Rasani, Mohammad Rasidi ; Seng, Kho Ko ; Ahmad, Muhamad Arif Fadli. / Development on simulation of small structure modal analysis method using piezoelectric film sensor. ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics. International Institute of Acoustics and Vibrations, 2016.
@inproceedings{a6da51572b6944b49df5c20656013bae,
title = "Development on simulation of small structure modal analysis method using piezoelectric film sensor",
abstract = "This study is conducted to determine the vibration or modal parameters namely natural frequencies and mode shapes of aluminum 6061 (AL6061). The work to inspect the parameters is done by conducting a free dynamic vibration analysis. Aluminum 6061 is chosen as the experimental specimen mainly because of its wide application in industries such as automotive, mainly in manufacturing of automobile frames. Theoretically and proven practically, if a component vibrates with a frequency that is coherent with the component's natural frequency, resonance frequency will occur and structural failure might emerged. Modal analysis study was conducted by both simulation and experimental approaches. Two sensors i.e. piezoelectric film and acelerometer were used in this study. The result obtained from accelerometer showed that the frequencies for mode shape 1, 2 and 3 for the square-shaped aluminum specimen were 195 Hz, 557Hz and 825Hz respectively. The result obtained from piezoelectric film on the other hand showed that the frequencies for mode shape 1, 2 and 3 for the square-shaped specimen were 205.33Hz, 609.33Hz and 904.33Hz respectively. Finally, the result captured from the simulation described that the frequencies for mode shape 1, 2 and 3 for the square-shaped were 191.89Hz, 542.34Hz and 766.18Hz respectively. Based on the result analysis, one could determine the natural frequency and mode shape of the aluminum. As a conclusion, structural failure due to resonance frequency can be avoided by investigating the natural frequency of the integrated components.",
author = "Ramli, {Mohd Irman} and Nuawi, {Mohd. Zaki} and Shahrum Abdullah and {Mohammad Rasani}, {Mohammad Rasidi} and Seng, {Kho Ko} and Ahmad, {Muhamad Arif Fadli}",
year = "2016",
language = "English",
booktitle = "ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics",
publisher = "International Institute of Acoustics and Vibrations",

}

TY - GEN

T1 - Development on simulation of small structure modal analysis method using piezoelectric film sensor

AU - Ramli, Mohd Irman

AU - Nuawi, Mohd. Zaki

AU - Abdullah, Shahrum

AU - Mohammad Rasani, Mohammad Rasidi

AU - Seng, Kho Ko

AU - Ahmad, Muhamad Arif Fadli

PY - 2016

Y1 - 2016

N2 - This study is conducted to determine the vibration or modal parameters namely natural frequencies and mode shapes of aluminum 6061 (AL6061). The work to inspect the parameters is done by conducting a free dynamic vibration analysis. Aluminum 6061 is chosen as the experimental specimen mainly because of its wide application in industries such as automotive, mainly in manufacturing of automobile frames. Theoretically and proven practically, if a component vibrates with a frequency that is coherent with the component's natural frequency, resonance frequency will occur and structural failure might emerged. Modal analysis study was conducted by both simulation and experimental approaches. Two sensors i.e. piezoelectric film and acelerometer were used in this study. The result obtained from accelerometer showed that the frequencies for mode shape 1, 2 and 3 for the square-shaped aluminum specimen were 195 Hz, 557Hz and 825Hz respectively. The result obtained from piezoelectric film on the other hand showed that the frequencies for mode shape 1, 2 and 3 for the square-shaped specimen were 205.33Hz, 609.33Hz and 904.33Hz respectively. Finally, the result captured from the simulation described that the frequencies for mode shape 1, 2 and 3 for the square-shaped were 191.89Hz, 542.34Hz and 766.18Hz respectively. Based on the result analysis, one could determine the natural frequency and mode shape of the aluminum. As a conclusion, structural failure due to resonance frequency can be avoided by investigating the natural frequency of the integrated components.

AB - This study is conducted to determine the vibration or modal parameters namely natural frequencies and mode shapes of aluminum 6061 (AL6061). The work to inspect the parameters is done by conducting a free dynamic vibration analysis. Aluminum 6061 is chosen as the experimental specimen mainly because of its wide application in industries such as automotive, mainly in manufacturing of automobile frames. Theoretically and proven practically, if a component vibrates with a frequency that is coherent with the component's natural frequency, resonance frequency will occur and structural failure might emerged. Modal analysis study was conducted by both simulation and experimental approaches. Two sensors i.e. piezoelectric film and acelerometer were used in this study. The result obtained from accelerometer showed that the frequencies for mode shape 1, 2 and 3 for the square-shaped aluminum specimen were 195 Hz, 557Hz and 825Hz respectively. The result obtained from piezoelectric film on the other hand showed that the frequencies for mode shape 1, 2 and 3 for the square-shaped specimen were 205.33Hz, 609.33Hz and 904.33Hz respectively. Finally, the result captured from the simulation described that the frequencies for mode shape 1, 2 and 3 for the square-shaped were 191.89Hz, 542.34Hz and 766.18Hz respectively. Based on the result analysis, one could determine the natural frequency and mode shape of the aluminum. As a conclusion, structural failure due to resonance frequency can be avoided by investigating the natural frequency of the integrated components.

UR - http://www.scopus.com/inward/record.url?scp=84987858946&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84987858946&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84987858946

BT - ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics

PB - International Institute of Acoustics and Vibrations

ER -