Development of theoretical oxygen saturation calibration curve based on optical density ratio and optical simulation approach

Nur Anida Jumadi, Gan Kok Beng, Mohd Alauddin Mohd Ali, Edmond Zahedi, Marlia Morsin

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The implementation of surface-based Monte Carlo simulation technique for oxygen saturation (SaO2) calibration curve estimation is demonstrated in this paper. Generally, the calibration curve is estimated either from the empirical study using animals as the subject of experiment or is derived from mathematical equations. However, the determination of calibration curve using animal is time consuming and requires expertise to conduct the experiment. Alternatively, an optical simulation technique has been used widely in the biomedical optics field due to its capability to exhibit the real tissue behavior. The mathematical relationship between optical density (OD) and optical density ratios (ODR) associated with SaO2 during systole and diastole is used as the basis of obtaining the theoretical calibration curve. The optical properties correspond to systolic and diastolic behaviors were applied to the tissue model to mimic the optical properties of the tissues. Based on the absorbed ray flux at detectors, the OD and ODR were successfully calculated. The simulation results of optical density ratio occurred at every 20 % interval of SaO2 is presented with maximum error of 2.17 % when comparing it with previous numerical simulation technique (MC model). The findings reveal the potential of the proposed method to be used for extended calibration curve study using other wavelength pair.

Original languageEnglish
Title of host publicationAdvances in Electrical and Electronic Engineering
Subtitle of host publicationFrom Theory to Applications - Proceedings of the International Conference on Electrical and Electronic Engineering, IC3E 2017
PublisherAmerican Institute of Physics Inc.
Volume1883
ISBN (Electronic)9780735415638
DOIs
Publication statusPublished - 14 Sep 2017
Event1st International Conference on Electrical and Electronic Engineering: Advancing Engineering Towards Sustainable Future, IC3E 2017 - Johor Bahru, Malaysia
Duration: 14 Aug 201715 Aug 2017

Other

Other1st International Conference on Electrical and Electronic Engineering: Advancing Engineering Towards Sustainable Future, IC3E 2017
CountryMalaysia
CityJohor Bahru
Period14/8/1715/8/17

Fingerprint

optical density
saturation
oxygen
curves
simulation
animals
diastole
systole
optical properties
rays
optics
intervals
detectors
wavelengths

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Jumadi, N. A., Kok Beng, G., Ali, M. A. M., Zahedi, E., & Morsin, M. (2017). Development of theoretical oxygen saturation calibration curve based on optical density ratio and optical simulation approach. In Advances in Electrical and Electronic Engineering: From Theory to Applications - Proceedings of the International Conference on Electrical and Electronic Engineering, IC3E 2017 (Vol. 1883). [020024] American Institute of Physics Inc.. https://doi.org/10.1063/1.5002042

Development of theoretical oxygen saturation calibration curve based on optical density ratio and optical simulation approach. / Jumadi, Nur Anida; Kok Beng, Gan; Ali, Mohd Alauddin Mohd; Zahedi, Edmond; Morsin, Marlia.

Advances in Electrical and Electronic Engineering: From Theory to Applications - Proceedings of the International Conference on Electrical and Electronic Engineering, IC3E 2017. Vol. 1883 American Institute of Physics Inc., 2017. 020024.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Jumadi, NA, Kok Beng, G, Ali, MAM, Zahedi, E & Morsin, M 2017, Development of theoretical oxygen saturation calibration curve based on optical density ratio and optical simulation approach. in Advances in Electrical and Electronic Engineering: From Theory to Applications - Proceedings of the International Conference on Electrical and Electronic Engineering, IC3E 2017. vol. 1883, 020024, American Institute of Physics Inc., 1st International Conference on Electrical and Electronic Engineering: Advancing Engineering Towards Sustainable Future, IC3E 2017, Johor Bahru, Malaysia, 14/8/17. https://doi.org/10.1063/1.5002042
Jumadi NA, Kok Beng G, Ali MAM, Zahedi E, Morsin M. Development of theoretical oxygen saturation calibration curve based on optical density ratio and optical simulation approach. In Advances in Electrical and Electronic Engineering: From Theory to Applications - Proceedings of the International Conference on Electrical and Electronic Engineering, IC3E 2017. Vol. 1883. American Institute of Physics Inc. 2017. 020024 https://doi.org/10.1063/1.5002042
Jumadi, Nur Anida ; Kok Beng, Gan ; Ali, Mohd Alauddin Mohd ; Zahedi, Edmond ; Morsin, Marlia. / Development of theoretical oxygen saturation calibration curve based on optical density ratio and optical simulation approach. Advances in Electrical and Electronic Engineering: From Theory to Applications - Proceedings of the International Conference on Electrical and Electronic Engineering, IC3E 2017. Vol. 1883 American Institute of Physics Inc., 2017.
@inproceedings{72a09e0f7c484914baa4497f2a181bf3,
title = "Development of theoretical oxygen saturation calibration curve based on optical density ratio and optical simulation approach",
abstract = "The implementation of surface-based Monte Carlo simulation technique for oxygen saturation (SaO2) calibration curve estimation is demonstrated in this paper. Generally, the calibration curve is estimated either from the empirical study using animals as the subject of experiment or is derived from mathematical equations. However, the determination of calibration curve using animal is time consuming and requires expertise to conduct the experiment. Alternatively, an optical simulation technique has been used widely in the biomedical optics field due to its capability to exhibit the real tissue behavior. The mathematical relationship between optical density (OD) and optical density ratios (ODR) associated with SaO2 during systole and diastole is used as the basis of obtaining the theoretical calibration curve. The optical properties correspond to systolic and diastolic behaviors were applied to the tissue model to mimic the optical properties of the tissues. Based on the absorbed ray flux at detectors, the OD and ODR were successfully calculated. The simulation results of optical density ratio occurred at every 20 {\%} interval of SaO2 is presented with maximum error of 2.17 {\%} when comparing it with previous numerical simulation technique (MC model). The findings reveal the potential of the proposed method to be used for extended calibration curve study using other wavelength pair.",
author = "Jumadi, {Nur Anida} and {Kok Beng}, Gan and Ali, {Mohd Alauddin Mohd} and Edmond Zahedi and Marlia Morsin",
year = "2017",
month = "9",
day = "14",
doi = "10.1063/1.5002042",
language = "English",
volume = "1883",
booktitle = "Advances in Electrical and Electronic Engineering",
publisher = "American Institute of Physics Inc.",

}

TY - GEN

T1 - Development of theoretical oxygen saturation calibration curve based on optical density ratio and optical simulation approach

AU - Jumadi, Nur Anida

AU - Kok Beng, Gan

AU - Ali, Mohd Alauddin Mohd

AU - Zahedi, Edmond

AU - Morsin, Marlia

PY - 2017/9/14

Y1 - 2017/9/14

N2 - The implementation of surface-based Monte Carlo simulation technique for oxygen saturation (SaO2) calibration curve estimation is demonstrated in this paper. Generally, the calibration curve is estimated either from the empirical study using animals as the subject of experiment or is derived from mathematical equations. However, the determination of calibration curve using animal is time consuming and requires expertise to conduct the experiment. Alternatively, an optical simulation technique has been used widely in the biomedical optics field due to its capability to exhibit the real tissue behavior. The mathematical relationship between optical density (OD) and optical density ratios (ODR) associated with SaO2 during systole and diastole is used as the basis of obtaining the theoretical calibration curve. The optical properties correspond to systolic and diastolic behaviors were applied to the tissue model to mimic the optical properties of the tissues. Based on the absorbed ray flux at detectors, the OD and ODR were successfully calculated. The simulation results of optical density ratio occurred at every 20 % interval of SaO2 is presented with maximum error of 2.17 % when comparing it with previous numerical simulation technique (MC model). The findings reveal the potential of the proposed method to be used for extended calibration curve study using other wavelength pair.

AB - The implementation of surface-based Monte Carlo simulation technique for oxygen saturation (SaO2) calibration curve estimation is demonstrated in this paper. Generally, the calibration curve is estimated either from the empirical study using animals as the subject of experiment or is derived from mathematical equations. However, the determination of calibration curve using animal is time consuming and requires expertise to conduct the experiment. Alternatively, an optical simulation technique has been used widely in the biomedical optics field due to its capability to exhibit the real tissue behavior. The mathematical relationship between optical density (OD) and optical density ratios (ODR) associated with SaO2 during systole and diastole is used as the basis of obtaining the theoretical calibration curve. The optical properties correspond to systolic and diastolic behaviors were applied to the tissue model to mimic the optical properties of the tissues. Based on the absorbed ray flux at detectors, the OD and ODR were successfully calculated. The simulation results of optical density ratio occurred at every 20 % interval of SaO2 is presented with maximum error of 2.17 % when comparing it with previous numerical simulation technique (MC model). The findings reveal the potential of the proposed method to be used for extended calibration curve study using other wavelength pair.

UR - http://www.scopus.com/inward/record.url?scp=85030648899&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85030648899&partnerID=8YFLogxK

U2 - 10.1063/1.5002042

DO - 10.1063/1.5002042

M3 - Conference contribution

VL - 1883

BT - Advances in Electrical and Electronic Engineering

PB - American Institute of Physics Inc.

ER -