Development of dynamic assisted tooling using TRIZ approach for dimple structure fabrication in milling process

Sharudin Bin Hassan, Jaharah A Ghani, Che Hassan Che Haron, Mohd Nor Azam Bin Md Dali

Research output: Contribution to journalArticle

Abstract

Most processes used for dimple structure fabrication nowadays have side effects on environment and human, high consumption of energy and high costs of machine set up. In order to solve these problems, Theory of Inventive Problem Solving (TRIZ) approach has been used to identify the appropriate process and technique to fabricate dimple structure on a flat surface. This method is chosen due to its advantage in terms of time saving and cost reduction for selecting the appropriate technique for fabricating dimple structure. Result analysis on TRIZ approach proved that milling process is a suitable technique to fabricate dimple structure on a flat surface. An assisted tooling is required to assist the dimple structure fabrication using a milling process. Prototype Dynamic Assisted Tooling Milling (DATM) has been successful developed to fabricate dimple structure.

Original languageEnglish
Pages (from-to)23-32
Number of pages10
JournalJournal of Mechanical Engineering
VolumeSI 3
Issue number1
Publication statusPublished - 1 Jan 2017

Fingerprint

Fabrication
Cost reduction
Costs

ASJC Scopus subject areas

  • Mechanical Engineering

Cite this

Development of dynamic assisted tooling using TRIZ approach for dimple structure fabrication in milling process. / Hassan, Sharudin Bin; A Ghani, Jaharah; Che Haron, Che Hassan; Dali, Mohd Nor Azam Bin Md.

In: Journal of Mechanical Engineering, Vol. SI 3, No. 1, 01.01.2017, p. 23-32.

Research output: Contribution to journalArticle

@article{bdbd8dc9d1a64d79bf35e1dc247f4b76,
title = "Development of dynamic assisted tooling using TRIZ approach for dimple structure fabrication in milling process",
abstract = "Most processes used for dimple structure fabrication nowadays have side effects on environment and human, high consumption of energy and high costs of machine set up. In order to solve these problems, Theory of Inventive Problem Solving (TRIZ) approach has been used to identify the appropriate process and technique to fabricate dimple structure on a flat surface. This method is chosen due to its advantage in terms of time saving and cost reduction for selecting the appropriate technique for fabricating dimple structure. Result analysis on TRIZ approach proved that milling process is a suitable technique to fabricate dimple structure on a flat surface. An assisted tooling is required to assist the dimple structure fabrication using a milling process. Prototype Dynamic Assisted Tooling Milling (DATM) has been successful developed to fabricate dimple structure.",
author = "Hassan, {Sharudin Bin} and {A Ghani}, Jaharah and {Che Haron}, {Che Hassan} and Dali, {Mohd Nor Azam Bin Md}",
year = "2017",
month = "1",
day = "1",
language = "English",
volume = "SI 3",
pages = "23--32",
journal = "Journal of Mechanical Engineering",
issn = "1823-5514",
publisher = "Institut Pengurusan Penyelidikan (RMI), Universiti Teknologi MARA",
number = "1",

}

TY - JOUR

T1 - Development of dynamic assisted tooling using TRIZ approach for dimple structure fabrication in milling process

AU - Hassan, Sharudin Bin

AU - A Ghani, Jaharah

AU - Che Haron, Che Hassan

AU - Dali, Mohd Nor Azam Bin Md

PY - 2017/1/1

Y1 - 2017/1/1

N2 - Most processes used for dimple structure fabrication nowadays have side effects on environment and human, high consumption of energy and high costs of machine set up. In order to solve these problems, Theory of Inventive Problem Solving (TRIZ) approach has been used to identify the appropriate process and technique to fabricate dimple structure on a flat surface. This method is chosen due to its advantage in terms of time saving and cost reduction for selecting the appropriate technique for fabricating dimple structure. Result analysis on TRIZ approach proved that milling process is a suitable technique to fabricate dimple structure on a flat surface. An assisted tooling is required to assist the dimple structure fabrication using a milling process. Prototype Dynamic Assisted Tooling Milling (DATM) has been successful developed to fabricate dimple structure.

AB - Most processes used for dimple structure fabrication nowadays have side effects on environment and human, high consumption of energy and high costs of machine set up. In order to solve these problems, Theory of Inventive Problem Solving (TRIZ) approach has been used to identify the appropriate process and technique to fabricate dimple structure on a flat surface. This method is chosen due to its advantage in terms of time saving and cost reduction for selecting the appropriate technique for fabricating dimple structure. Result analysis on TRIZ approach proved that milling process is a suitable technique to fabricate dimple structure on a flat surface. An assisted tooling is required to assist the dimple structure fabrication using a milling process. Prototype Dynamic Assisted Tooling Milling (DATM) has been successful developed to fabricate dimple structure.

UR - http://www.scopus.com/inward/record.url?scp=85041027826&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85041027826&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:85041027826

VL - SI 3

SP - 23

EP - 32

JO - Journal of Mechanical Engineering

JF - Journal of Mechanical Engineering

SN - 1823-5514

IS - 1

ER -