Determining the optimal operator allocation using a three-phase methodology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This paper presents the operator allocation decision in labor-intensive manufacturing system using a threephase methodology. A two-phase methodology from literatures has been extended to a three-phase methodology which in a three-phase methodology, operators' performance is evaluated before the allocation is made. The evaluation of operators' performance in Phase 1 is realized as a requirement in operator allocation decision because it will affect the production system's performance. In Phase 2, the used of computer simulation offered flexibility in determining inputs and outputs of each operator allocation alternative. Finally, in Phase 3 the optimal operator allocation is concluded. The combination of these three phases is essential because it includes all important factors. Hence, it will assist the management of the manufacturing companies, especially SMEs in providing ideas to determine an optimal operator allocation. Based on these findings a three-phase methodology improves the current operator allocation.

Original languageEnglish
Title of host publication2014 UKM FST Postgraduate Colloquium - Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2014 Postgraduate Colloquium
EditorsZahari Ibrahim, Haja Maideen Kader Maideen, Nazlina Ibrahim, Nurul Huda Abd Karim, Taufik Yusof, Fatimah Abdul Razak, Nurulkamal Maseran, Rozida Mohd Khalid, Noor Baa'yah Ibrahim, Hasidah Mohd. Sidek, Mohd Salmi Md Noorani, Norbert Simon
PublisherAmerican Institute of Physics Inc.
Pages851-858
Number of pages8
ISBN (Electronic)9780735412507
DOIs
Publication statusPublished - 1 Jan 2014
Event2014 Postgraduate Colloquium of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology, UKM FST 2014 - Selangor, Malaysia
Duration: 9 Apr 201411 Apr 2014

Publication series

NameAIP Conference Proceedings
Volume1614
ISSN (Print)0094-243X
ISSN (Electronic)1551-7616

Other

Other2014 Postgraduate Colloquium of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology, UKM FST 2014
CountryMalaysia
CitySelangor
Period9/4/1411/4/14

Fingerprint

methodology
operators
operator performance
manufacturing
labor
flexibility
computerized simulation
requirements
evaluation
output

Keywords

  • Computer simulation
  • DEA
  • FAHP
  • Operator allocation
  • ZOGP

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Rani, R. M., Ismail, W. R., & Ab Rahman, M. N. (2014). Determining the optimal operator allocation using a three-phase methodology. In Z. Ibrahim, H. M. K. Maideen, N. Ibrahim, N. H. A. Karim, T. Yusof, F. A. Razak, N. Maseran, R. M. Khalid, N. B. Ibrahim, H. M. Sidek, M. S. M. Noorani, ... N. Simon (Eds.), 2014 UKM FST Postgraduate Colloquium - Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2014 Postgraduate Colloquium (pp. 851-858). (AIP Conference Proceedings; Vol. 1614). American Institute of Physics Inc.. https://doi.org/10.1063/1.4895313

Determining the optimal operator allocation using a three-phase methodology. / Rani, Ruzanita Mat; Ismail, Wan Rosmanira; Ab Rahman, Mohd Nizam.

2014 UKM FST Postgraduate Colloquium - Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2014 Postgraduate Colloquium. ed. / Zahari Ibrahim; Haja Maideen Kader Maideen; Nazlina Ibrahim; Nurul Huda Abd Karim; Taufik Yusof; Fatimah Abdul Razak; Nurulkamal Maseran; Rozida Mohd Khalid; Noor Baa'yah Ibrahim; Hasidah Mohd. Sidek; Mohd Salmi Md Noorani; Norbert Simon. American Institute of Physics Inc., 2014. p. 851-858 (AIP Conference Proceedings; Vol. 1614).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rani, RM, Ismail, WR & Ab Rahman, MN 2014, Determining the optimal operator allocation using a three-phase methodology. in Z Ibrahim, HMK Maideen, N Ibrahim, NHA Karim, T Yusof, FA Razak, N Maseran, RM Khalid, NB Ibrahim, HM Sidek, MSM Noorani & N Simon (eds), 2014 UKM FST Postgraduate Colloquium - Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2014 Postgraduate Colloquium. AIP Conference Proceedings, vol. 1614, American Institute of Physics Inc., pp. 851-858, 2014 Postgraduate Colloquium of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology, UKM FST 2014, Selangor, Malaysia, 9/4/14. https://doi.org/10.1063/1.4895313
Rani RM, Ismail WR, Ab Rahman MN. Determining the optimal operator allocation using a three-phase methodology. In Ibrahim Z, Maideen HMK, Ibrahim N, Karim NHA, Yusof T, Razak FA, Maseran N, Khalid RM, Ibrahim NB, Sidek HM, Noorani MSM, Simon N, editors, 2014 UKM FST Postgraduate Colloquium - Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2014 Postgraduate Colloquium. American Institute of Physics Inc. 2014. p. 851-858. (AIP Conference Proceedings). https://doi.org/10.1063/1.4895313
Rani, Ruzanita Mat ; Ismail, Wan Rosmanira ; Ab Rahman, Mohd Nizam. / Determining the optimal operator allocation using a three-phase methodology. 2014 UKM FST Postgraduate Colloquium - Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2014 Postgraduate Colloquium. editor / Zahari Ibrahim ; Haja Maideen Kader Maideen ; Nazlina Ibrahim ; Nurul Huda Abd Karim ; Taufik Yusof ; Fatimah Abdul Razak ; Nurulkamal Maseran ; Rozida Mohd Khalid ; Noor Baa'yah Ibrahim ; Hasidah Mohd. Sidek ; Mohd Salmi Md Noorani ; Norbert Simon. American Institute of Physics Inc., 2014. pp. 851-858 (AIP Conference Proceedings).
@inproceedings{f6270a4c00e64b0785f6bc35466ed6a2,
title = "Determining the optimal operator allocation using a three-phase methodology",
abstract = "This paper presents the operator allocation decision in labor-intensive manufacturing system using a threephase methodology. A two-phase methodology from literatures has been extended to a three-phase methodology which in a three-phase methodology, operators' performance is evaluated before the allocation is made. The evaluation of operators' performance in Phase 1 is realized as a requirement in operator allocation decision because it will affect the production system's performance. In Phase 2, the used of computer simulation offered flexibility in determining inputs and outputs of each operator allocation alternative. Finally, in Phase 3 the optimal operator allocation is concluded. The combination of these three phases is essential because it includes all important factors. Hence, it will assist the management of the manufacturing companies, especially SMEs in providing ideas to determine an optimal operator allocation. Based on these findings a three-phase methodology improves the current operator allocation.",
keywords = "Computer simulation, DEA, FAHP, Operator allocation, ZOGP",
author = "Rani, {Ruzanita Mat} and Ismail, {Wan Rosmanira} and {Ab Rahman}, {Mohd Nizam}",
year = "2014",
month = "1",
day = "1",
doi = "10.1063/1.4895313",
language = "English",
series = "AIP Conference Proceedings",
publisher = "American Institute of Physics Inc.",
pages = "851--858",
editor = "Zahari Ibrahim and Maideen, {Haja Maideen Kader} and Nazlina Ibrahim and Karim, {Nurul Huda Abd} and Taufik Yusof and Razak, {Fatimah Abdul} and Nurulkamal Maseran and Khalid, {Rozida Mohd} and Ibrahim, {Noor Baa'yah} and Sidek, {Hasidah Mohd.} and Noorani, {Mohd Salmi Md} and Norbert Simon",
booktitle = "2014 UKM FST Postgraduate Colloquium - Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2014 Postgraduate Colloquium",

}

TY - GEN

T1 - Determining the optimal operator allocation using a three-phase methodology

AU - Rani, Ruzanita Mat

AU - Ismail, Wan Rosmanira

AU - Ab Rahman, Mohd Nizam

PY - 2014/1/1

Y1 - 2014/1/1

N2 - This paper presents the operator allocation decision in labor-intensive manufacturing system using a threephase methodology. A two-phase methodology from literatures has been extended to a three-phase methodology which in a three-phase methodology, operators' performance is evaluated before the allocation is made. The evaluation of operators' performance in Phase 1 is realized as a requirement in operator allocation decision because it will affect the production system's performance. In Phase 2, the used of computer simulation offered flexibility in determining inputs and outputs of each operator allocation alternative. Finally, in Phase 3 the optimal operator allocation is concluded. The combination of these three phases is essential because it includes all important factors. Hence, it will assist the management of the manufacturing companies, especially SMEs in providing ideas to determine an optimal operator allocation. Based on these findings a three-phase methodology improves the current operator allocation.

AB - This paper presents the operator allocation decision in labor-intensive manufacturing system using a threephase methodology. A two-phase methodology from literatures has been extended to a three-phase methodology which in a three-phase methodology, operators' performance is evaluated before the allocation is made. The evaluation of operators' performance in Phase 1 is realized as a requirement in operator allocation decision because it will affect the production system's performance. In Phase 2, the used of computer simulation offered flexibility in determining inputs and outputs of each operator allocation alternative. Finally, in Phase 3 the optimal operator allocation is concluded. The combination of these three phases is essential because it includes all important factors. Hence, it will assist the management of the manufacturing companies, especially SMEs in providing ideas to determine an optimal operator allocation. Based on these findings a three-phase methodology improves the current operator allocation.

KW - Computer simulation

KW - DEA

KW - FAHP

KW - Operator allocation

KW - ZOGP

UR - http://www.scopus.com/inward/record.url?scp=85063826259&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85063826259&partnerID=8YFLogxK

U2 - 10.1063/1.4895313

DO - 10.1063/1.4895313

M3 - Conference contribution

T3 - AIP Conference Proceedings

SP - 851

EP - 858

BT - 2014 UKM FST Postgraduate Colloquium - Proceedings of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology 2014 Postgraduate Colloquium

A2 - Ibrahim, Zahari

A2 - Maideen, Haja Maideen Kader

A2 - Ibrahim, Nazlina

A2 - Karim, Nurul Huda Abd

A2 - Yusof, Taufik

A2 - Razak, Fatimah Abdul

A2 - Maseran, Nurulkamal

A2 - Khalid, Rozida Mohd

A2 - Ibrahim, Noor Baa'yah

A2 - Sidek, Hasidah Mohd.

A2 - Noorani, Mohd Salmi Md

A2 - Simon, Norbert

PB - American Institute of Physics Inc.

ER -