Determination of critical powder loading of titanium-hydroxyapatite with powder space holder for powder injection molding feedstocks

Mohd Yusuf Zakaria, Abu Bakar Sulong, Mohd Ikram Ramli, Muhammad Rafi Raza

Research output: Contribution to journalArticle

Abstract

Binder and powder formulation are crucial for powder injection molding (PIM) process that can be obtained based on critical powder volume percetange (CPVP) method. The binder is the main component for flowability of feedstock and proper composition can influence the feedstock whether can be injected, debinded and sintered without any defect. This study is focused on the determination of critical powder loading for titanium-hydroxyapatite (Ti-HA) with powder space holder for powder injection molding feedstock. The critical powder obtained at 82% of the powder with 90:10 ratios of the titanium and hydroxyapatite with 20% of a space holder. The optimal powder loading selected at 78%, which is 2~5% below to the critical powder loading value. Green part was successfully obtained without any physical defect using the optimal powder loading.

Original languageEnglish
Pages (from-to)11-21
Number of pages11
JournalJournal of Mechanical Engineering
VolumeSI 3
Issue number1
Publication statusPublished - 1 Jan 2017

Fingerprint

Hydroxyapatite
Injection molding
Feedstocks
Titanium
Powders
Binders
Defects

ASJC Scopus subject areas

  • Mechanical Engineering

Cite this

Determination of critical powder loading of titanium-hydroxyapatite with powder space holder for powder injection molding feedstocks. / Zakaria, Mohd Yusuf; Sulong, Abu Bakar; Ramli, Mohd Ikram; Raza, Muhammad Rafi.

In: Journal of Mechanical Engineering, Vol. SI 3, No. 1, 01.01.2017, p. 11-21.

Research output: Contribution to journalArticle

@article{dd9859f4522b4824b376793b19d60028,
title = "Determination of critical powder loading of titanium-hydroxyapatite with powder space holder for powder injection molding feedstocks",
abstract = "Binder and powder formulation are crucial for powder injection molding (PIM) process that can be obtained based on critical powder volume percetange (CPVP) method. The binder is the main component for flowability of feedstock and proper composition can influence the feedstock whether can be injected, debinded and sintered without any defect. This study is focused on the determination of critical powder loading for titanium-hydroxyapatite (Ti-HA) with powder space holder for powder injection molding feedstock. The critical powder obtained at 82{\%} of the powder with 90:10 ratios of the titanium and hydroxyapatite with 20{\%} of a space holder. The optimal powder loading selected at 78{\%}, which is 2~5{\%} below to the critical powder loading value. Green part was successfully obtained without any physical defect using the optimal powder loading.",
author = "Zakaria, {Mohd Yusuf} and Sulong, {Abu Bakar} and Ramli, {Mohd Ikram} and Raza, {Muhammad Rafi}",
year = "2017",
month = "1",
day = "1",
language = "English",
volume = "SI 3",
pages = "11--21",
journal = "Journal of Mechanical Engineering",
issn = "1823-5514",
publisher = "Institut Pengurusan Penyelidikan (RMI), Universiti Teknologi MARA",
number = "1",

}

TY - JOUR

T1 - Determination of critical powder loading of titanium-hydroxyapatite with powder space holder for powder injection molding feedstocks

AU - Zakaria, Mohd Yusuf

AU - Sulong, Abu Bakar

AU - Ramli, Mohd Ikram

AU - Raza, Muhammad Rafi

PY - 2017/1/1

Y1 - 2017/1/1

N2 - Binder and powder formulation are crucial for powder injection molding (PIM) process that can be obtained based on critical powder volume percetange (CPVP) method. The binder is the main component for flowability of feedstock and proper composition can influence the feedstock whether can be injected, debinded and sintered without any defect. This study is focused on the determination of critical powder loading for titanium-hydroxyapatite (Ti-HA) with powder space holder for powder injection molding feedstock. The critical powder obtained at 82% of the powder with 90:10 ratios of the titanium and hydroxyapatite with 20% of a space holder. The optimal powder loading selected at 78%, which is 2~5% below to the critical powder loading value. Green part was successfully obtained without any physical defect using the optimal powder loading.

AB - Binder and powder formulation are crucial for powder injection molding (PIM) process that can be obtained based on critical powder volume percetange (CPVP) method. The binder is the main component for flowability of feedstock and proper composition can influence the feedstock whether can be injected, debinded and sintered without any defect. This study is focused on the determination of critical powder loading for titanium-hydroxyapatite (Ti-HA) with powder space holder for powder injection molding feedstock. The critical powder obtained at 82% of the powder with 90:10 ratios of the titanium and hydroxyapatite with 20% of a space holder. The optimal powder loading selected at 78%, which is 2~5% below to the critical powder loading value. Green part was successfully obtained without any physical defect using the optimal powder loading.

UR - http://www.scopus.com/inward/record.url?scp=85041031963&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85041031963&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:85041031963

VL - SI 3

SP - 11

EP - 21

JO - Journal of Mechanical Engineering

JF - Journal of Mechanical Engineering

SN - 1823-5514

IS - 1

ER -