Detection of defects of kenaf/epoxy by thermography analyses

M. J. Suriani, Aidi Ali, A. Khalina, S. M. Sapuan, Shahrir Abdullah

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

There are quite There are quite a few defects can occur due to manufacturing of the composites such as voids, resin-rich zones, pockets of undispersed cross-linker, misaligned fibres and regions where resin has poorly wetted the fibres. Such defect can reduce the mechanical properties as well mechanical performance of the structure and thus must be determine. In this study, the defect of Kenaf/epoxy reinforced composite materials has been determined by thermography analyses and mechanical properties testing of the composites have been done by tensile test. 95% of the thermography analyses have proved that the defects occur in the composite has reduced the mechanical properties of the specimens.

Original languageEnglish
Title of host publicationIOP Conference Series: Materials Science and Engineering
Volume36
Edition1
DOIs
Publication statusPublished - 2012
Event1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 - Kuantan, Pahang, Malaysia
Duration: 5 Dec 20117 Dec 2011

Other

Other1st International Conference on Mechanical Engineering Research 2011, ICMER 2011
CountryMalaysia
CityKuantan, Pahang
Period5/12/117/12/11

Fingerprint

Defects
Composite materials
Mechanical properties
Resins
Fibers
Testing

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Cite this

Suriani, M. J., Ali, A., Khalina, A., Sapuan, S. M., & Abdullah, S. (2012). Detection of defects of kenaf/epoxy by thermography analyses. In IOP Conference Series: Materials Science and Engineering (1 ed., Vol. 36). [012013] https://doi.org/10.1088/1757-899X/36/1/012013

Detection of defects of kenaf/epoxy by thermography analyses. / Suriani, M. J.; Ali, Aidi; Khalina, A.; Sapuan, S. M.; Abdullah, Shahrir.

IOP Conference Series: Materials Science and Engineering. Vol. 36 1. ed. 2012. 012013.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Suriani, MJ, Ali, A, Khalina, A, Sapuan, SM & Abdullah, S 2012, Detection of defects of kenaf/epoxy by thermography analyses. in IOP Conference Series: Materials Science and Engineering. 1 edn, vol. 36, 012013, 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011, Kuantan, Pahang, Malaysia, 5/12/11. https://doi.org/10.1088/1757-899X/36/1/012013
Suriani MJ, Ali A, Khalina A, Sapuan SM, Abdullah S. Detection of defects of kenaf/epoxy by thermography analyses. In IOP Conference Series: Materials Science and Engineering. 1 ed. Vol. 36. 2012. 012013 https://doi.org/10.1088/1757-899X/36/1/012013
Suriani, M. J. ; Ali, Aidi ; Khalina, A. ; Sapuan, S. M. ; Abdullah, Shahrir. / Detection of defects of kenaf/epoxy by thermography analyses. IOP Conference Series: Materials Science and Engineering. Vol. 36 1. ed. 2012.
@inproceedings{2bcb6efd65c6444eaa4642a2255c77c6,
title = "Detection of defects of kenaf/epoxy by thermography analyses",
abstract = "There are quite There are quite a few defects can occur due to manufacturing of the composites such as voids, resin-rich zones, pockets of undispersed cross-linker, misaligned fibres and regions where resin has poorly wetted the fibres. Such defect can reduce the mechanical properties as well mechanical performance of the structure and thus must be determine. In this study, the defect of Kenaf/epoxy reinforced composite materials has been determined by thermography analyses and mechanical properties testing of the composites have been done by tensile test. 95{\%} of the thermography analyses have proved that the defects occur in the composite has reduced the mechanical properties of the specimens.",
author = "Suriani, {M. J.} and Aidi Ali and A. Khalina and Sapuan, {S. M.} and Shahrir Abdullah",
year = "2012",
doi = "10.1088/1757-899X/36/1/012013",
language = "English",
volume = "36",
booktitle = "IOP Conference Series: Materials Science and Engineering",
edition = "1",

}

TY - GEN

T1 - Detection of defects of kenaf/epoxy by thermography analyses

AU - Suriani, M. J.

AU - Ali, Aidi

AU - Khalina, A.

AU - Sapuan, S. M.

AU - Abdullah, Shahrir

PY - 2012

Y1 - 2012

N2 - There are quite There are quite a few defects can occur due to manufacturing of the composites such as voids, resin-rich zones, pockets of undispersed cross-linker, misaligned fibres and regions where resin has poorly wetted the fibres. Such defect can reduce the mechanical properties as well mechanical performance of the structure and thus must be determine. In this study, the defect of Kenaf/epoxy reinforced composite materials has been determined by thermography analyses and mechanical properties testing of the composites have been done by tensile test. 95% of the thermography analyses have proved that the defects occur in the composite has reduced the mechanical properties of the specimens.

AB - There are quite There are quite a few defects can occur due to manufacturing of the composites such as voids, resin-rich zones, pockets of undispersed cross-linker, misaligned fibres and regions where resin has poorly wetted the fibres. Such defect can reduce the mechanical properties as well mechanical performance of the structure and thus must be determine. In this study, the defect of Kenaf/epoxy reinforced composite materials has been determined by thermography analyses and mechanical properties testing of the composites have been done by tensile test. 95% of the thermography analyses have proved that the defects occur in the composite has reduced the mechanical properties of the specimens.

UR - http://www.scopus.com/inward/record.url?scp=84874465399&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84874465399&partnerID=8YFLogxK

U2 - 10.1088/1757-899X/36/1/012013

DO - 10.1088/1757-899X/36/1/012013

M3 - Conference contribution

VL - 36

BT - IOP Conference Series: Materials Science and Engineering

ER -