Design, simulation and fabrication of a microstrip patch antenna for dual band application

Md Fokhrul Islam, M. A Mohd Ali, Burhanuddin Yeop Majlis, Norbahiah Misran

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Abstract

There is an increasing demand for newer microwave and millimeter-wave systems to meet the emerging telecommunication challenges with respect to size, performance and cost. Microstrip antennas offer the advantages of thin profile, light weight, low cost, ease of fabrication and compatibility with integrated circuitry. This paper presents a coaxilly-fed single-layer compact microstrip patch antenna for achieving dual-polarized radiation suitable for applications in the IEEE Radar Band C and X. Simultaneous use of both frequencies should dramatically improve data collection and knowledge of the targets in an airborne synthetic aperture radar system. The designed antenna consists of three rectangular patches which are overlapped along their diagonals. The design and simulation of the antenna were performed using 3D full wave electromagnetic simulator IE3D. The antenna with a bandwidth of VSWR<2 reaches 154MHz (f 0=6.83GHz) and 209MHz (f0=9.73GHz) was designed and simulated successfully.

Original languageEnglish
Title of host publicationProceedings of ICECE 2008 - 5th International Conference on Electrical and Computer Engineering
Pages799-802
Number of pages4
DOIs
Publication statusPublished - 2008
Event5th International Conference on Electrical and Computer Engineering, ICECE 2008 - Dhaka
Duration: 20 Dec 200822 Dec 2008

Other

Other5th International Conference on Electrical and Computer Engineering, ICECE 2008
CityDhaka
Period20/12/0822/12/08

Fingerprint

Microstrip antennas
Antennas
Fabrication
Antenna feeders
Radar systems
Synthetic aperture radar
Millimeter waves
Electromagnetic waves
Telecommunication
Costs
Radar
Simulators
Microwaves
Bandwidth
Radiation

ASJC Scopus subject areas

  • Computer Science Applications
  • Software
  • Electrical and Electronic Engineering

Cite this

Islam, M. F., Ali, M. A. M., Yeop Majlis, B., & Misran, N. (2008). Design, simulation and fabrication of a microstrip patch antenna for dual band application. In Proceedings of ICECE 2008 - 5th International Conference on Electrical and Computer Engineering (pp. 799-802). [4769319] https://doi.org/10.1109/ICECE.2008.4769319

Design, simulation and fabrication of a microstrip patch antenna for dual band application. / Islam, Md Fokhrul; Ali, M. A Mohd; Yeop Majlis, Burhanuddin; Misran, Norbahiah.

Proceedings of ICECE 2008 - 5th International Conference on Electrical and Computer Engineering. 2008. p. 799-802 4769319.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Islam, MF, Ali, MAM, Yeop Majlis, B & Misran, N 2008, Design, simulation and fabrication of a microstrip patch antenna for dual band application. in Proceedings of ICECE 2008 - 5th International Conference on Electrical and Computer Engineering., 4769319, pp. 799-802, 5th International Conference on Electrical and Computer Engineering, ICECE 2008, Dhaka, 20/12/08. https://doi.org/10.1109/ICECE.2008.4769319
Islam MF, Ali MAM, Yeop Majlis B, Misran N. Design, simulation and fabrication of a microstrip patch antenna for dual band application. In Proceedings of ICECE 2008 - 5th International Conference on Electrical and Computer Engineering. 2008. p. 799-802. 4769319 https://doi.org/10.1109/ICECE.2008.4769319
Islam, Md Fokhrul ; Ali, M. A Mohd ; Yeop Majlis, Burhanuddin ; Misran, Norbahiah. / Design, simulation and fabrication of a microstrip patch antenna for dual band application. Proceedings of ICECE 2008 - 5th International Conference on Electrical and Computer Engineering. 2008. pp. 799-802
@inproceedings{8d4a0aebc604413188bcfda36c91ea1c,
title = "Design, simulation and fabrication of a microstrip patch antenna for dual band application",
abstract = "There is an increasing demand for newer microwave and millimeter-wave systems to meet the emerging telecommunication challenges with respect to size, performance and cost. Microstrip antennas offer the advantages of thin profile, light weight, low cost, ease of fabrication and compatibility with integrated circuitry. This paper presents a coaxilly-fed single-layer compact microstrip patch antenna for achieving dual-polarized radiation suitable for applications in the IEEE Radar Band C and X. Simultaneous use of both frequencies should dramatically improve data collection and knowledge of the targets in an airborne synthetic aperture radar system. The designed antenna consists of three rectangular patches which are overlapped along their diagonals. The design and simulation of the antenna were performed using 3D full wave electromagnetic simulator IE3D. The antenna with a bandwidth of VSWR<2 reaches 154MHz (f 0=6.83GHz) and 209MHz (f0=9.73GHz) was designed and simulated successfully.",
author = "Islam, {Md Fokhrul} and Ali, {M. A Mohd} and {Yeop Majlis}, Burhanuddin and Norbahiah Misran",
year = "2008",
doi = "10.1109/ICECE.2008.4769319",
language = "English",
isbn = "9781424420155",
pages = "799--802",
booktitle = "Proceedings of ICECE 2008 - 5th International Conference on Electrical and Computer Engineering",

}

TY - GEN

T1 - Design, simulation and fabrication of a microstrip patch antenna for dual band application

AU - Islam, Md Fokhrul

AU - Ali, M. A Mohd

AU - Yeop Majlis, Burhanuddin

AU - Misran, Norbahiah

PY - 2008

Y1 - 2008

N2 - There is an increasing demand for newer microwave and millimeter-wave systems to meet the emerging telecommunication challenges with respect to size, performance and cost. Microstrip antennas offer the advantages of thin profile, light weight, low cost, ease of fabrication and compatibility with integrated circuitry. This paper presents a coaxilly-fed single-layer compact microstrip patch antenna for achieving dual-polarized radiation suitable for applications in the IEEE Radar Band C and X. Simultaneous use of both frequencies should dramatically improve data collection and knowledge of the targets in an airborne synthetic aperture radar system. The designed antenna consists of three rectangular patches which are overlapped along their diagonals. The design and simulation of the antenna were performed using 3D full wave electromagnetic simulator IE3D. The antenna with a bandwidth of VSWR<2 reaches 154MHz (f 0=6.83GHz) and 209MHz (f0=9.73GHz) was designed and simulated successfully.

AB - There is an increasing demand for newer microwave and millimeter-wave systems to meet the emerging telecommunication challenges with respect to size, performance and cost. Microstrip antennas offer the advantages of thin profile, light weight, low cost, ease of fabrication and compatibility with integrated circuitry. This paper presents a coaxilly-fed single-layer compact microstrip patch antenna for achieving dual-polarized radiation suitable for applications in the IEEE Radar Band C and X. Simultaneous use of both frequencies should dramatically improve data collection and knowledge of the targets in an airborne synthetic aperture radar system. The designed antenna consists of three rectangular patches which are overlapped along their diagonals. The design and simulation of the antenna were performed using 3D full wave electromagnetic simulator IE3D. The antenna with a bandwidth of VSWR<2 reaches 154MHz (f 0=6.83GHz) and 209MHz (f0=9.73GHz) was designed and simulated successfully.

UR - http://www.scopus.com/inward/record.url?scp=63449141938&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=63449141938&partnerID=8YFLogxK

U2 - 10.1109/ICECE.2008.4769319

DO - 10.1109/ICECE.2008.4769319

M3 - Conference contribution

AN - SCOPUS:63449141938

SN - 9781424420155

SP - 799

EP - 802

BT - Proceedings of ICECE 2008 - 5th International Conference on Electrical and Computer Engineering

ER -