Design of parallel and serial configurations of encoder and decoder modules for Spectral Amplitude Coding (SAC) Optical Code Division Multiple Access (OCDMA) based on Fiber Bragg Gratings (FBGs)

Z. Zan, S. A. Aljunid, M. H. Yaacob, S. B A Anas, M. K. Abdullah, S. Shaari

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)

    Abstract

    This project is concentrated on the design of encoder and decoder modules for a new developed Spectral Amplitude Coding (SAG) of Optical Code Division Multiple Access (OCDMA) system called Modified Double Weight (MDW) code. The parallel and serial configurations of encoder and decoder modules have been designed and the performances of both systems are studied. For a system modulated at 622 Mbps with the LED output power of 8 dBm, the parallel configuration gave a lower BER of 1.22 × 10-10 and 5.53 × 10-9 for a longer distance of 26 km for channel 1 and channel 2 respectively. However, for the serial configuration the maximum transmission distance is 12 km with BER of 2.33 ×10-9 and 6.45 × 10-10 for channel 1 and channel 2 respectively. Nevertheless, the serial configuration support a higher bit rate of 1.5Gbps compared to 1Gbps supported by parallel configuration.

    Original languageEnglish
    Title of host publication2005 13th IEEE International Conference on Networks jointly held with the 2005 7th IEEE Malaysia International Conference on Communications, Proceedings
    Pages650-654
    Number of pages5
    Volume2
    DOIs
    Publication statusPublished - 2005
    Event2005 13th IEEE International Conference on Networks jointly held with the 2005 7th IEEE Malaysia International Conference on Communications - Kuala Lumpur
    Duration: 16 Nov 200518 Nov 2005

    Other

    Other2005 13th IEEE International Conference on Networks jointly held with the 2005 7th IEEE Malaysia International Conference on Communications
    CityKuala Lumpur
    Period16/11/0518/11/05

    Fingerprint

    Fiber Bragg gratings
    Code division multiple access
    Light emitting diodes

    Keywords

    • AND-subtraction
    • Double weight code
    • Fiber bragg grating (FBG)
    • LED source
    • Modified double weight (MDW) code
    • Optical code division multiple access

    ASJC Scopus subject areas

    • Engineering(all)

    Cite this

    Zan, Z., Aljunid, S. A., Yaacob, M. H., Anas, S. B. A., Abdullah, M. K., & Shaari, S. (2005). Design of parallel and serial configurations of encoder and decoder modules for Spectral Amplitude Coding (SAC) Optical Code Division Multiple Access (OCDMA) based on Fiber Bragg Gratings (FBGs). In 2005 13th IEEE International Conference on Networks jointly held with the 2005 7th IEEE Malaysia International Conference on Communications, Proceedings (Vol. 2, pp. 650-654). [1635583] https://doi.org/10.1109/ICON.2005.1635583

    Design of parallel and serial configurations of encoder and decoder modules for Spectral Amplitude Coding (SAC) Optical Code Division Multiple Access (OCDMA) based on Fiber Bragg Gratings (FBGs). / Zan, Z.; Aljunid, S. A.; Yaacob, M. H.; Anas, S. B A; Abdullah, M. K.; Shaari, S.

    2005 13th IEEE International Conference on Networks jointly held with the 2005 7th IEEE Malaysia International Conference on Communications, Proceedings. Vol. 2 2005. p. 650-654 1635583.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Zan, Z, Aljunid, SA, Yaacob, MH, Anas, SBA, Abdullah, MK & Shaari, S 2005, Design of parallel and serial configurations of encoder and decoder modules for Spectral Amplitude Coding (SAC) Optical Code Division Multiple Access (OCDMA) based on Fiber Bragg Gratings (FBGs). in 2005 13th IEEE International Conference on Networks jointly held with the 2005 7th IEEE Malaysia International Conference on Communications, Proceedings. vol. 2, 1635583, pp. 650-654, 2005 13th IEEE International Conference on Networks jointly held with the 2005 7th IEEE Malaysia International Conference on Communications, Kuala Lumpur, 16/11/05. https://doi.org/10.1109/ICON.2005.1635583
    Zan Z, Aljunid SA, Yaacob MH, Anas SBA, Abdullah MK, Shaari S. Design of parallel and serial configurations of encoder and decoder modules for Spectral Amplitude Coding (SAC) Optical Code Division Multiple Access (OCDMA) based on Fiber Bragg Gratings (FBGs). In 2005 13th IEEE International Conference on Networks jointly held with the 2005 7th IEEE Malaysia International Conference on Communications, Proceedings. Vol. 2. 2005. p. 650-654. 1635583 https://doi.org/10.1109/ICON.2005.1635583
    Zan, Z. ; Aljunid, S. A. ; Yaacob, M. H. ; Anas, S. B A ; Abdullah, M. K. ; Shaari, S. / Design of parallel and serial configurations of encoder and decoder modules for Spectral Amplitude Coding (SAC) Optical Code Division Multiple Access (OCDMA) based on Fiber Bragg Gratings (FBGs). 2005 13th IEEE International Conference on Networks jointly held with the 2005 7th IEEE Malaysia International Conference on Communications, Proceedings. Vol. 2 2005. pp. 650-654
    @inproceedings{1ce547b798c944f7888653047c4adc7e,
    title = "Design of parallel and serial configurations of encoder and decoder modules for Spectral Amplitude Coding (SAC) Optical Code Division Multiple Access (OCDMA) based on Fiber Bragg Gratings (FBGs)",
    abstract = "This project is concentrated on the design of encoder and decoder modules for a new developed Spectral Amplitude Coding (SAG) of Optical Code Division Multiple Access (OCDMA) system called Modified Double Weight (MDW) code. The parallel and serial configurations of encoder and decoder modules have been designed and the performances of both systems are studied. For a system modulated at 622 Mbps with the LED output power of 8 dBm, the parallel configuration gave a lower BER of 1.22 × 10-10 and 5.53 × 10-9 for a longer distance of 26 km for channel 1 and channel 2 respectively. However, for the serial configuration the maximum transmission distance is 12 km with BER of 2.33 ×10-9 and 6.45 × 10-10 for channel 1 and channel 2 respectively. Nevertheless, the serial configuration support a higher bit rate of 1.5Gbps compared to 1Gbps supported by parallel configuration.",
    keywords = "AND-subtraction, Double weight code, Fiber bragg grating (FBG), LED source, Modified double weight (MDW) code, Optical code division multiple access",
    author = "Z. Zan and Aljunid, {S. A.} and Yaacob, {M. H.} and Anas, {S. B A} and Abdullah, {M. K.} and S. Shaari",
    year = "2005",
    doi = "10.1109/ICON.2005.1635583",
    language = "English",
    isbn = "1424400007",
    volume = "2",
    pages = "650--654",
    booktitle = "2005 13th IEEE International Conference on Networks jointly held with the 2005 7th IEEE Malaysia International Conference on Communications, Proceedings",

    }

    TY - GEN

    T1 - Design of parallel and serial configurations of encoder and decoder modules for Spectral Amplitude Coding (SAC) Optical Code Division Multiple Access (OCDMA) based on Fiber Bragg Gratings (FBGs)

    AU - Zan, Z.

    AU - Aljunid, S. A.

    AU - Yaacob, M. H.

    AU - Anas, S. B A

    AU - Abdullah, M. K.

    AU - Shaari, S.

    PY - 2005

    Y1 - 2005

    N2 - This project is concentrated on the design of encoder and decoder modules for a new developed Spectral Amplitude Coding (SAG) of Optical Code Division Multiple Access (OCDMA) system called Modified Double Weight (MDW) code. The parallel and serial configurations of encoder and decoder modules have been designed and the performances of both systems are studied. For a system modulated at 622 Mbps with the LED output power of 8 dBm, the parallel configuration gave a lower BER of 1.22 × 10-10 and 5.53 × 10-9 for a longer distance of 26 km for channel 1 and channel 2 respectively. However, for the serial configuration the maximum transmission distance is 12 km with BER of 2.33 ×10-9 and 6.45 × 10-10 for channel 1 and channel 2 respectively. Nevertheless, the serial configuration support a higher bit rate of 1.5Gbps compared to 1Gbps supported by parallel configuration.

    AB - This project is concentrated on the design of encoder and decoder modules for a new developed Spectral Amplitude Coding (SAG) of Optical Code Division Multiple Access (OCDMA) system called Modified Double Weight (MDW) code. The parallel and serial configurations of encoder and decoder modules have been designed and the performances of both systems are studied. For a system modulated at 622 Mbps with the LED output power of 8 dBm, the parallel configuration gave a lower BER of 1.22 × 10-10 and 5.53 × 10-9 for a longer distance of 26 km for channel 1 and channel 2 respectively. However, for the serial configuration the maximum transmission distance is 12 km with BER of 2.33 ×10-9 and 6.45 × 10-10 for channel 1 and channel 2 respectively. Nevertheless, the serial configuration support a higher bit rate of 1.5Gbps compared to 1Gbps supported by parallel configuration.

    KW - AND-subtraction

    KW - Double weight code

    KW - Fiber bragg grating (FBG)

    KW - LED source

    KW - Modified double weight (MDW) code

    KW - Optical code division multiple access

    UR - http://www.scopus.com/inward/record.url?scp=33847336848&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=33847336848&partnerID=8YFLogxK

    U2 - 10.1109/ICON.2005.1635583

    DO - 10.1109/ICON.2005.1635583

    M3 - Conference contribution

    SN - 1424400007

    SN - 9781424400003

    VL - 2

    SP - 650

    EP - 654

    BT - 2005 13th IEEE International Conference on Networks jointly held with the 2005 7th IEEE Malaysia International Conference on Communications, Proceedings

    ER -