Design of microstrip antenna for modern wireless communication

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

In this paper, the design of microstrip antenna for modern wireless communication is presented. The proposed antenna has a fairly good performance of impedance bandwidth at 2.40 GHz. The antenna is designed on size of 46 × 37 × 1.5 mm3 and fed with 50 Ω microstrip line. Satisfactory performance was obtained by using TLC 30 (TACONIC)substrate, allowing low cost production, Tightly controlled Dk, low Df, excellent dimentional stability and high flexural strength. It covers the frequency bands 1.37 and 2.40 GHz which includes GPS and WLAN. The proposed microstrip antenna for wireless communication, consists of two major combined radiating elements: a rectangular and triangular patch element. These two elements are interconnected by step and patch B1 elements. It is found that the effect on frequency band depends on the length of the partial ground, position of steps, length of the rectangle and height of triangle in order to obtain a better S11 value. The design antenna able to obtain power gain of 2.7 dBi. Results are obtained using CST Microwave studio.

Original languageEnglish
Title of host publication2012 International Symposium on Telecommunication Technologies, ISTT 2012
Pages42-46
Number of pages5
DOIs
Publication statusPublished - 2012
Event2012 International Symposium on Telecommunication Technologies, ISTT 2012 - Kuala Lumpur
Duration: 26 Nov 201228 Nov 2012

Other

Other2012 International Symposium on Telecommunication Technologies, ISTT 2012
CityKuala Lumpur
Period26/11/1228/11/12

Fingerprint

Microstrip antennas
Antennas
Frequency bands
Communication
Microstrip lines
Studios
Wireless local area networks (WLAN)
Bending strength
Global positioning system
Microwaves
Bandwidth
Substrates
Costs

Keywords

  • Microstrip antenna
  • Microstrip wireless antenna
  • Modern Wireless Communication
  • Wireless Communication

ASJC Scopus subject areas

  • Computer Networks and Communications

Cite this

Thana Pakkiam, K., Jit Singh, M. S., & Islam, M. T. (2012). Design of microstrip antenna for modern wireless communication. In 2012 International Symposium on Telecommunication Technologies, ISTT 2012 (pp. 42-46). [6481562] https://doi.org/10.1109/ISTT.2012.6481562

Design of microstrip antenna for modern wireless communication. / Thana Pakkiam, K.; Jit Singh, Mandeep Singh; Islam, Mohammad Tariqul.

2012 International Symposium on Telecommunication Technologies, ISTT 2012. 2012. p. 42-46 6481562.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thana Pakkiam, K, Jit Singh, MS & Islam, MT 2012, Design of microstrip antenna for modern wireless communication. in 2012 International Symposium on Telecommunication Technologies, ISTT 2012., 6481562, pp. 42-46, 2012 International Symposium on Telecommunication Technologies, ISTT 2012, Kuala Lumpur, 26/11/12. https://doi.org/10.1109/ISTT.2012.6481562
Thana Pakkiam K, Jit Singh MS, Islam MT. Design of microstrip antenna for modern wireless communication. In 2012 International Symposium on Telecommunication Technologies, ISTT 2012. 2012. p. 42-46. 6481562 https://doi.org/10.1109/ISTT.2012.6481562
Thana Pakkiam, K. ; Jit Singh, Mandeep Singh ; Islam, Mohammad Tariqul. / Design of microstrip antenna for modern wireless communication. 2012 International Symposium on Telecommunication Technologies, ISTT 2012. 2012. pp. 42-46
@inproceedings{8442530fcd934722beaa62229586522d,
title = "Design of microstrip antenna for modern wireless communication",
abstract = "In this paper, the design of microstrip antenna for modern wireless communication is presented. The proposed antenna has a fairly good performance of impedance bandwidth at 2.40 GHz. The antenna is designed on size of 46 × 37 × 1.5 mm3 and fed with 50 Ω microstrip line. Satisfactory performance was obtained by using TLC 30 (TACONIC)substrate, allowing low cost production, Tightly controlled Dk, low Df, excellent dimentional stability and high flexural strength. It covers the frequency bands 1.37 and 2.40 GHz which includes GPS and WLAN. The proposed microstrip antenna for wireless communication, consists of two major combined radiating elements: a rectangular and triangular patch element. These two elements are interconnected by step and patch B1 elements. It is found that the effect on frequency band depends on the length of the partial ground, position of steps, length of the rectangle and height of triangle in order to obtain a better S11 value. The design antenna able to obtain power gain of 2.7 dBi. Results are obtained using CST Microwave studio.",
keywords = "Microstrip antenna, Microstrip wireless antenna, Modern Wireless Communication, Wireless Communication",
author = "{Thana Pakkiam}, K. and {Jit Singh}, {Mandeep Singh} and Islam, {Mohammad Tariqul}",
year = "2012",
doi = "10.1109/ISTT.2012.6481562",
language = "English",
isbn = "9781467347860",
pages = "42--46",
booktitle = "2012 International Symposium on Telecommunication Technologies, ISTT 2012",

}

TY - GEN

T1 - Design of microstrip antenna for modern wireless communication

AU - Thana Pakkiam, K.

AU - Jit Singh, Mandeep Singh

AU - Islam, Mohammad Tariqul

PY - 2012

Y1 - 2012

N2 - In this paper, the design of microstrip antenna for modern wireless communication is presented. The proposed antenna has a fairly good performance of impedance bandwidth at 2.40 GHz. The antenna is designed on size of 46 × 37 × 1.5 mm3 and fed with 50 Ω microstrip line. Satisfactory performance was obtained by using TLC 30 (TACONIC)substrate, allowing low cost production, Tightly controlled Dk, low Df, excellent dimentional stability and high flexural strength. It covers the frequency bands 1.37 and 2.40 GHz which includes GPS and WLAN. The proposed microstrip antenna for wireless communication, consists of two major combined radiating elements: a rectangular and triangular patch element. These two elements are interconnected by step and patch B1 elements. It is found that the effect on frequency band depends on the length of the partial ground, position of steps, length of the rectangle and height of triangle in order to obtain a better S11 value. The design antenna able to obtain power gain of 2.7 dBi. Results are obtained using CST Microwave studio.

AB - In this paper, the design of microstrip antenna for modern wireless communication is presented. The proposed antenna has a fairly good performance of impedance bandwidth at 2.40 GHz. The antenna is designed on size of 46 × 37 × 1.5 mm3 and fed with 50 Ω microstrip line. Satisfactory performance was obtained by using TLC 30 (TACONIC)substrate, allowing low cost production, Tightly controlled Dk, low Df, excellent dimentional stability and high flexural strength. It covers the frequency bands 1.37 and 2.40 GHz which includes GPS and WLAN. The proposed microstrip antenna for wireless communication, consists of two major combined radiating elements: a rectangular and triangular patch element. These two elements are interconnected by step and patch B1 elements. It is found that the effect on frequency band depends on the length of the partial ground, position of steps, length of the rectangle and height of triangle in order to obtain a better S11 value. The design antenna able to obtain power gain of 2.7 dBi. Results are obtained using CST Microwave studio.

KW - Microstrip antenna

KW - Microstrip wireless antenna

KW - Modern Wireless Communication

KW - Wireless Communication

UR - http://www.scopus.com/inward/record.url?scp=84875756233&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84875756233&partnerID=8YFLogxK

U2 - 10.1109/ISTT.2012.6481562

DO - 10.1109/ISTT.2012.6481562

M3 - Conference contribution

SN - 9781467347860

SP - 42

EP - 46

BT - 2012 International Symposium on Telecommunication Technologies, ISTT 2012

ER -