Reka bentuk implan sendi pinggul dan penggunaannya dalam persekitaran digital

Translated title of the contribution: Design of hip joint implan and its use in digital environmental

Riza Sulaiman, Azrulhizam Shapi`i, Mohammad Khatim Hasan, Anton Satria Prabuwono, Abdul Yazid Mohd Kassim, Hamzaini Abdul Hamid

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

The field of orthopedics has become increasingly important at present as the number of patients diagnosed with osteoporosis increases every year. Conventional identification methods are still being used to find a suitable implant for the patient. Therefore, a digital method need to be for an effective identification of implant size, identification prosess can be effectively implemented. This paper describes the design of hip joint implant for use in digital environment. Manual implant template used by Universiti Kebangsaan Malaysia Medical Center (UKMMC) was used as the basis for the hip joint implant design. The template was redesigned using AutoCAD 2008 software. Template generated in AutoCAD format was converted to JPEG format so that it can be used in Photoshop software for colouring and scaling. The digital implant was then tested by using x-ray images of patients from by UKMMC. Our results showed that the digital hip joint implants produced were suitable and can be used in the digital environment.

Original languageUndefined/Unknown
Pages (from-to)1307-1312
Number of pages6
JournalSains Malaysiana
Volume40
Issue number11
Publication statusPublished - Nov 2011

Fingerprint

Orthopedics
Coloring
X rays

Keywords

  • Digital
  • Hip joint
  • Implant
  • Template

ASJC Scopus subject areas

  • General

Cite this

Reka bentuk implan sendi pinggul dan penggunaannya dalam persekitaran digital. / Sulaiman, Riza; Shapi`i, Azrulhizam; Hasan, Mohammad Khatim; Prabuwono, Anton Satria; Mohd Kassim, Abdul Yazid; Abdul Hamid, Hamzaini.

In: Sains Malaysiana, Vol. 40, No. 11, 11.2011, p. 1307-1312.

Research output: Contribution to journalArticle

@article{9f136e4a2f62421b8ec282f2ea74985d,
title = "Reka bentuk implan sendi pinggul dan penggunaannya dalam persekitaran digital",
abstract = "The field of orthopedics has become increasingly important at present as the number of patients diagnosed with osteoporosis increases every year. Conventional identification methods are still being used to find a suitable implant for the patient. Therefore, a digital method need to be for an effective identification of implant size, identification prosess can be effectively implemented. This paper describes the design of hip joint implant for use in digital environment. Manual implant template used by Universiti Kebangsaan Malaysia Medical Center (UKMMC) was used as the basis for the hip joint implant design. The template was redesigned using AutoCAD 2008 software. Template generated in AutoCAD format was converted to JPEG format so that it can be used in Photoshop software for colouring and scaling. The digital implant was then tested by using x-ray images of patients from by UKMMC. Our results showed that the digital hip joint implants produced were suitable and can be used in the digital environment.",
keywords = "Digital, Hip joint, Implant, Template",
author = "Riza Sulaiman and Azrulhizam Shapi`i and Hasan, {Mohammad Khatim} and Prabuwono, {Anton Satria} and {Mohd Kassim}, {Abdul Yazid} and {Abdul Hamid}, Hamzaini",
year = "2011",
month = "11",
language = "Undefined/Unknown",
volume = "40",
pages = "1307--1312",
journal = "Sains Malaysiana",
issn = "0126-6039",
publisher = "Penerbit Universiti Kebangsaan Malaysia",
number = "11",

}

TY - JOUR

T1 - Reka bentuk implan sendi pinggul dan penggunaannya dalam persekitaran digital

AU - Sulaiman, Riza

AU - Shapi`i, Azrulhizam

AU - Hasan, Mohammad Khatim

AU - Prabuwono, Anton Satria

AU - Mohd Kassim, Abdul Yazid

AU - Abdul Hamid, Hamzaini

PY - 2011/11

Y1 - 2011/11

N2 - The field of orthopedics has become increasingly important at present as the number of patients diagnosed with osteoporosis increases every year. Conventional identification methods are still being used to find a suitable implant for the patient. Therefore, a digital method need to be for an effective identification of implant size, identification prosess can be effectively implemented. This paper describes the design of hip joint implant for use in digital environment. Manual implant template used by Universiti Kebangsaan Malaysia Medical Center (UKMMC) was used as the basis for the hip joint implant design. The template was redesigned using AutoCAD 2008 software. Template generated in AutoCAD format was converted to JPEG format so that it can be used in Photoshop software for colouring and scaling. The digital implant was then tested by using x-ray images of patients from by UKMMC. Our results showed that the digital hip joint implants produced were suitable and can be used in the digital environment.

AB - The field of orthopedics has become increasingly important at present as the number of patients diagnosed with osteoporosis increases every year. Conventional identification methods are still being used to find a suitable implant for the patient. Therefore, a digital method need to be for an effective identification of implant size, identification prosess can be effectively implemented. This paper describes the design of hip joint implant for use in digital environment. Manual implant template used by Universiti Kebangsaan Malaysia Medical Center (UKMMC) was used as the basis for the hip joint implant design. The template was redesigned using AutoCAD 2008 software. Template generated in AutoCAD format was converted to JPEG format so that it can be used in Photoshop software for colouring and scaling. The digital implant was then tested by using x-ray images of patients from by UKMMC. Our results showed that the digital hip joint implants produced were suitable and can be used in the digital environment.

KW - Digital

KW - Hip joint

KW - Implant

KW - Template

UR - http://www.scopus.com/inward/record.url?scp=80053644836&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80053644836&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:80053644836

VL - 40

SP - 1307

EP - 1312

JO - Sains Malaysiana

JF - Sains Malaysiana

SN - 0126-6039

IS - 11

ER -