Design of ftth monitoring system based on zigbee wireless sensor network

Mastang, Mohd Syuhaimi Ab Rahman, Kamarulzaman Mat, Kasmiran Jumari

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

As part of its ongoing efforts to support the nation's call for higher broadband speeds, Telekom Malaysia Berhad (TM) started to launch the new fibre-to-the-home (FTTH) broadband access solution by the second half of 2008, which will offer users the preliminary step towards the digital home experience. Fault protection became important issues in order to present an efficient FTTH network and simultaneously and provide continuous services to the end user without being interrupted by any failure in fiber lines. The failure at optical lines will give two negative impacts. First, the fiber cut will cause optical leakage that is able to damage our eyes. Second, an interruption will occur during the distribution of multimedia service to customers for a long period of time. In the traditional method, when there is a breakdown in FTTH lines, the engineer must go to the failure location to check the optical cable using an optical time-domain reflect meter (OTDR). The disadvantage of this conventional method is that the engineer must leave the Central Office to inject a laser from customer location. It will cause inconvenience, service disruption and waste valuable time for both parties. We proposed optical sensor integrated with wireless sensor network to determine the condition of all optical lines in FTTH network. This system is capable to monitor the condition of all optical lines and make automatic switching for restoration purpose. Every sensor will be put in every line and can communicate each others to ensure the operation of network. One receiver is located in Central Office (CO) to allow engineer to monitor and control all optical lines.

Original languageEnglish
Title of host publicationISBEIA 2011 - 2011 IEEE Symposium on Business, Engineering and Industrial Applications
Pages243-246
Number of pages4
DOIs
Publication statusPublished - 2011
Event2011 IEEE Symposium on Business, Engineering and Industrial Applications, ISBEIA 2011 - Langkawi
Duration: 25 Sep 201128 Sep 2011

Other

Other2011 IEEE Symposium on Business, Engineering and Industrial Applications, ISBEIA 2011
CityLangkawi
Period25/9/1128/9/11

Fingerprint

Zigbee
Wireless sensor networks
Home networks
Monitoring
Engineers
Optical cables
Multimedia services
Fibers
Optical sensors
Restoration
Fiber to the x
Fiber
ZigBee
Monitoring system
Lasers
Sensors

Keywords

  • FTTH monitoring
  • optical monitoring
  • Zigbee monitoring

ASJC Scopus subject areas

  • Business and International Management
  • Industrial and Manufacturing Engineering

Cite this

Mastang, Ab Rahman, M. S., Mat, K., & Jumari, K. (2011). Design of ftth monitoring system based on zigbee wireless sensor network. In ISBEIA 2011 - 2011 IEEE Symposium on Business, Engineering and Industrial Applications (pp. 243-246). [6088814] https://doi.org/10.1109/ISBEIA.2011.6088814

Design of ftth monitoring system based on zigbee wireless sensor network. / Mastang, ; Ab Rahman, Mohd Syuhaimi; Mat, Kamarulzaman; Jumari, Kasmiran.

ISBEIA 2011 - 2011 IEEE Symposium on Business, Engineering and Industrial Applications. 2011. p. 243-246 6088814.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mastang, , Ab Rahman, MS, Mat, K & Jumari, K 2011, Design of ftth monitoring system based on zigbee wireless sensor network. in ISBEIA 2011 - 2011 IEEE Symposium on Business, Engineering and Industrial Applications., 6088814, pp. 243-246, 2011 IEEE Symposium on Business, Engineering and Industrial Applications, ISBEIA 2011, Langkawi, 25/9/11. https://doi.org/10.1109/ISBEIA.2011.6088814
Mastang , Ab Rahman MS, Mat K, Jumari K. Design of ftth monitoring system based on zigbee wireless sensor network. In ISBEIA 2011 - 2011 IEEE Symposium on Business, Engineering and Industrial Applications. 2011. p. 243-246. 6088814 https://doi.org/10.1109/ISBEIA.2011.6088814
Mastang, ; Ab Rahman, Mohd Syuhaimi ; Mat, Kamarulzaman ; Jumari, Kasmiran. / Design of ftth monitoring system based on zigbee wireless sensor network. ISBEIA 2011 - 2011 IEEE Symposium on Business, Engineering and Industrial Applications. 2011. pp. 243-246
@inproceedings{839dc805e5d24f6588e69ebd3d1f748b,
title = "Design of ftth monitoring system based on zigbee wireless sensor network",
abstract = "As part of its ongoing efforts to support the nation's call for higher broadband speeds, Telekom Malaysia Berhad (TM) started to launch the new fibre-to-the-home (FTTH) broadband access solution by the second half of 2008, which will offer users the preliminary step towards the digital home experience. Fault protection became important issues in order to present an efficient FTTH network and simultaneously and provide continuous services to the end user without being interrupted by any failure in fiber lines. The failure at optical lines will give two negative impacts. First, the fiber cut will cause optical leakage that is able to damage our eyes. Second, an interruption will occur during the distribution of multimedia service to customers for a long period of time. In the traditional method, when there is a breakdown in FTTH lines, the engineer must go to the failure location to check the optical cable using an optical time-domain reflect meter (OTDR). The disadvantage of this conventional method is that the engineer must leave the Central Office to inject a laser from customer location. It will cause inconvenience, service disruption and waste valuable time for both parties. We proposed optical sensor integrated with wireless sensor network to determine the condition of all optical lines in FTTH network. This system is capable to monitor the condition of all optical lines and make automatic switching for restoration purpose. Every sensor will be put in every line and can communicate each others to ensure the operation of network. One receiver is located in Central Office (CO) to allow engineer to monitor and control all optical lines.",
keywords = "FTTH monitoring, optical monitoring, Zigbee monitoring",
author = "Mastang and {Ab Rahman}, {Mohd Syuhaimi} and Kamarulzaman Mat and Kasmiran Jumari",
year = "2011",
doi = "10.1109/ISBEIA.2011.6088814",
language = "English",
isbn = "9781457715495",
pages = "243--246",
booktitle = "ISBEIA 2011 - 2011 IEEE Symposium on Business, Engineering and Industrial Applications",

}

TY - GEN

T1 - Design of ftth monitoring system based on zigbee wireless sensor network

AU - Mastang,

AU - Ab Rahman, Mohd Syuhaimi

AU - Mat, Kamarulzaman

AU - Jumari, Kasmiran

PY - 2011

Y1 - 2011

N2 - As part of its ongoing efforts to support the nation's call for higher broadband speeds, Telekom Malaysia Berhad (TM) started to launch the new fibre-to-the-home (FTTH) broadband access solution by the second half of 2008, which will offer users the preliminary step towards the digital home experience. Fault protection became important issues in order to present an efficient FTTH network and simultaneously and provide continuous services to the end user without being interrupted by any failure in fiber lines. The failure at optical lines will give two negative impacts. First, the fiber cut will cause optical leakage that is able to damage our eyes. Second, an interruption will occur during the distribution of multimedia service to customers for a long period of time. In the traditional method, when there is a breakdown in FTTH lines, the engineer must go to the failure location to check the optical cable using an optical time-domain reflect meter (OTDR). The disadvantage of this conventional method is that the engineer must leave the Central Office to inject a laser from customer location. It will cause inconvenience, service disruption and waste valuable time for both parties. We proposed optical sensor integrated with wireless sensor network to determine the condition of all optical lines in FTTH network. This system is capable to monitor the condition of all optical lines and make automatic switching for restoration purpose. Every sensor will be put in every line and can communicate each others to ensure the operation of network. One receiver is located in Central Office (CO) to allow engineer to monitor and control all optical lines.

AB - As part of its ongoing efforts to support the nation's call for higher broadband speeds, Telekom Malaysia Berhad (TM) started to launch the new fibre-to-the-home (FTTH) broadband access solution by the second half of 2008, which will offer users the preliminary step towards the digital home experience. Fault protection became important issues in order to present an efficient FTTH network and simultaneously and provide continuous services to the end user without being interrupted by any failure in fiber lines. The failure at optical lines will give two negative impacts. First, the fiber cut will cause optical leakage that is able to damage our eyes. Second, an interruption will occur during the distribution of multimedia service to customers for a long period of time. In the traditional method, when there is a breakdown in FTTH lines, the engineer must go to the failure location to check the optical cable using an optical time-domain reflect meter (OTDR). The disadvantage of this conventional method is that the engineer must leave the Central Office to inject a laser from customer location. It will cause inconvenience, service disruption and waste valuable time for both parties. We proposed optical sensor integrated with wireless sensor network to determine the condition of all optical lines in FTTH network. This system is capable to monitor the condition of all optical lines and make automatic switching for restoration purpose. Every sensor will be put in every line and can communicate each others to ensure the operation of network. One receiver is located in Central Office (CO) to allow engineer to monitor and control all optical lines.

KW - FTTH monitoring

KW - optical monitoring

KW - Zigbee monitoring

UR - http://www.scopus.com/inward/record.url?scp=84255187438&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84255187438&partnerID=8YFLogxK

U2 - 10.1109/ISBEIA.2011.6088814

DO - 10.1109/ISBEIA.2011.6088814

M3 - Conference contribution

SN - 9781457715495

SP - 243

EP - 246

BT - ISBEIA 2011 - 2011 IEEE Symposium on Business, Engineering and Industrial Applications

ER -