Projekt powierzchniowo tłoczonej struktury EBG w aplikacji do niższych cze{ogonek}stotliwości

Translated title of the contribution: Design of a wideband compact electromagnetic band gap structure for lower frequency applications

M. Shahidul Alam, Mohammad Tariqul Islam

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

A compact planar design of EBG structure with wide band gap is proposed in this study. The characteristic of the initial JC-EBG shape is analyzed by varying different dimensions and later improved results are obtained with a modified design. The maximum band gap achieved is 3.1 GHz (1.75-4.85 GHz), which is 31.91% more than initial one (2.35 GHz) and the lowest level of transmission coefficient obtained is around -100dB, with 12.5 mm unit cell size. The structure is designed on easily available standard PCB material and exhibits good performance in lower frequency range (below 6 GHz). Analyzed results showed the compatibility and tunability of the design for applications like GSM, PCS, WiMax, UMTS, WiFi, and Bluetooth etc.

Original languageUndefined/Unknown
Pages (from-to)147-150
Number of pages4
JournalPrzeglad Elektrotechniczny
Volume89
Issue number4
Publication statusPublished - 2013

Fingerprint

Energy gap
3G mobile communication systems
Wimax
Bluetooth
Global system for mobile communications
Polychlorinated biphenyls

Keywords

  • Band gap
  • Compact
  • EBG
  • High impedance surfaces
  • Wideband

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Projekt powierzchniowo tłoczonej struktury EBG w aplikacji do niższych cze{ogonek}stotliwości. / Alam, M. Shahidul; Islam, Mohammad Tariqul.

In: Przeglad Elektrotechniczny, Vol. 89, No. 4, 2013, p. 147-150.

Research output: Contribution to journalArticle

@article{189dbd3df10f452d9a00d13ba716a666,
title = "Projekt powierzchniowo tłoczonej struktury EBG w aplikacji do niższych cze{ogonek}stotliwości",
abstract = "A compact planar design of EBG structure with wide band gap is proposed in this study. The characteristic of the initial JC-EBG shape is analyzed by varying different dimensions and later improved results are obtained with a modified design. The maximum band gap achieved is 3.1 GHz (1.75-4.85 GHz), which is 31.91{\%} more than initial one (2.35 GHz) and the lowest level of transmission coefficient obtained is around -100dB, with 12.5 mm unit cell size. The structure is designed on easily available standard PCB material and exhibits good performance in lower frequency range (below 6 GHz). Analyzed results showed the compatibility and tunability of the design for applications like GSM, PCS, WiMax, UMTS, WiFi, and Bluetooth etc.",
keywords = "Band gap, Compact, EBG, High impedance surfaces, Wideband",
author = "Alam, {M. Shahidul} and Islam, {Mohammad Tariqul}",
year = "2013",
language = "Undefined/Unknown",
volume = "89",
pages = "147--150",
journal = "Przeglad Elektrotechniczny",
issn = "0033-2097",
publisher = "Wydawnictwo SIGMA - N O T Sp. z o.o.",
number = "4",

}

TY - JOUR

T1 - Projekt powierzchniowo tłoczonej struktury EBG w aplikacji do niższych cze{ogonek}stotliwości

AU - Alam, M. Shahidul

AU - Islam, Mohammad Tariqul

PY - 2013

Y1 - 2013

N2 - A compact planar design of EBG structure with wide band gap is proposed in this study. The characteristic of the initial JC-EBG shape is analyzed by varying different dimensions and later improved results are obtained with a modified design. The maximum band gap achieved is 3.1 GHz (1.75-4.85 GHz), which is 31.91% more than initial one (2.35 GHz) and the lowest level of transmission coefficient obtained is around -100dB, with 12.5 mm unit cell size. The structure is designed on easily available standard PCB material and exhibits good performance in lower frequency range (below 6 GHz). Analyzed results showed the compatibility and tunability of the design for applications like GSM, PCS, WiMax, UMTS, WiFi, and Bluetooth etc.

AB - A compact planar design of EBG structure with wide band gap is proposed in this study. The characteristic of the initial JC-EBG shape is analyzed by varying different dimensions and later improved results are obtained with a modified design. The maximum band gap achieved is 3.1 GHz (1.75-4.85 GHz), which is 31.91% more than initial one (2.35 GHz) and the lowest level of transmission coefficient obtained is around -100dB, with 12.5 mm unit cell size. The structure is designed on easily available standard PCB material and exhibits good performance in lower frequency range (below 6 GHz). Analyzed results showed the compatibility and tunability of the design for applications like GSM, PCS, WiMax, UMTS, WiFi, and Bluetooth etc.

KW - Band gap

KW - Compact

KW - EBG

KW - High impedance surfaces

KW - Wideband

UR - http://www.scopus.com/inward/record.url?scp=84875680734&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84875680734&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:84875680734

VL - 89

SP - 147

EP - 150

JO - Przeglad Elektrotechniczny

JF - Przeglad Elektrotechniczny

SN - 0033-2097

IS - 4

ER -