Design of a prototype D-statcom using DSP controller for voltage sag mitigation

Hendri Masdi, Norman Mariun, S. M. Bashi, Azah Mohamed, Sallehhudin Yusuf

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Abstract

This paper presents the design of a prototype distribution static compensator (D-STATCOM) for load compensation in an unbalanced distribution system. The D-STATCOM is intended to replace the widely used static Var compensator (SVC). The compensation scheme of the D-STATCOM is derived using the symmetrical component method. In this work, the 12-pulse D-STATCOM configuration with IGBT has been designed and the graphic based models of the D-STATCOM have been developed using the PSCAD/EMTDC electromagnetic transient simulation program. Accordingly, simulation is first carried out 10 illustrate the use of D-STATCOM in mitigating voltage sag in a distribution system. The D-STATCOM has been developed using DSP controller to achieve excellent overall performance. Simulation results prove that the D-STATCOM is capable of mitigating voltage sag by controlling PWM of the system using DSP board.

Original languageEnglish
Title of host publicationProceedings of the International Conference on Power Electronics and Drive Systems
Pages569-574
Number of pages6
Volume1
Publication statusPublished - 2005
EventSixth International Conference on Power Electronics and Drive Systems, PEDS 200 - Kuala Lumpur
Duration: 28 Nov 20051 Dec 2005

Other

OtherSixth International Conference on Power Electronics and Drive Systems, PEDS 200
CityKuala Lumpur
Period28/11/051/12/05

Fingerprint

Controllers
Insulated gate bipolar transistors (IGBT)
Electric potential
Pulse width modulation
Compensation and Redress
Static Var compensators

Keywords

  • Component
  • D-Statcom load compensation
  • Digital signal proscessing
  • Voltage sag

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Masdi, H., Mariun, N., Bashi, S. M., Mohamed, A., & Yusuf, S. (2005). Design of a prototype D-statcom using DSP controller for voltage sag mitigation. In Proceedings of the International Conference on Power Electronics and Drive Systems (Vol. 1, pp. 569-574). [1619751]

Design of a prototype D-statcom using DSP controller for voltage sag mitigation. / Masdi, Hendri; Mariun, Norman; Bashi, S. M.; Mohamed, Azah; Yusuf, Sallehhudin.

Proceedings of the International Conference on Power Electronics and Drive Systems. Vol. 1 2005. p. 569-574 1619751.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Masdi, H, Mariun, N, Bashi, SM, Mohamed, A & Yusuf, S 2005, Design of a prototype D-statcom using DSP controller for voltage sag mitigation. in Proceedings of the International Conference on Power Electronics and Drive Systems. vol. 1, 1619751, pp. 569-574, Sixth International Conference on Power Electronics and Drive Systems, PEDS 200, Kuala Lumpur, 28/11/05.
Masdi H, Mariun N, Bashi SM, Mohamed A, Yusuf S. Design of a prototype D-statcom using DSP controller for voltage sag mitigation. In Proceedings of the International Conference on Power Electronics and Drive Systems. Vol. 1. 2005. p. 569-574. 1619751
Masdi, Hendri ; Mariun, Norman ; Bashi, S. M. ; Mohamed, Azah ; Yusuf, Sallehhudin. / Design of a prototype D-statcom using DSP controller for voltage sag mitigation. Proceedings of the International Conference on Power Electronics and Drive Systems. Vol. 1 2005. pp. 569-574
@inproceedings{bf1ce34bd85e49f98f6cdadd82c18462,
title = "Design of a prototype D-statcom using DSP controller for voltage sag mitigation",
abstract = "This paper presents the design of a prototype distribution static compensator (D-STATCOM) for load compensation in an unbalanced distribution system. The D-STATCOM is intended to replace the widely used static Var compensator (SVC). The compensation scheme of the D-STATCOM is derived using the symmetrical component method. In this work, the 12-pulse D-STATCOM configuration with IGBT has been designed and the graphic based models of the D-STATCOM have been developed using the PSCAD/EMTDC electromagnetic transient simulation program. Accordingly, simulation is first carried out 10 illustrate the use of D-STATCOM in mitigating voltage sag in a distribution system. The D-STATCOM has been developed using DSP controller to achieve excellent overall performance. Simulation results prove that the D-STATCOM is capable of mitigating voltage sag by controlling PWM of the system using DSP board.",
keywords = "Component, D-Statcom load compensation, Digital signal proscessing, Voltage sag",
author = "Hendri Masdi and Norman Mariun and Bashi, {S. M.} and Azah Mohamed and Sallehhudin Yusuf",
year = "2005",
language = "English",
isbn = "0780392965",
volume = "1",
pages = "569--574",
booktitle = "Proceedings of the International Conference on Power Electronics and Drive Systems",

}

TY - GEN

T1 - Design of a prototype D-statcom using DSP controller for voltage sag mitigation

AU - Masdi, Hendri

AU - Mariun, Norman

AU - Bashi, S. M.

AU - Mohamed, Azah

AU - Yusuf, Sallehhudin

PY - 2005

Y1 - 2005

N2 - This paper presents the design of a prototype distribution static compensator (D-STATCOM) for load compensation in an unbalanced distribution system. The D-STATCOM is intended to replace the widely used static Var compensator (SVC). The compensation scheme of the D-STATCOM is derived using the symmetrical component method. In this work, the 12-pulse D-STATCOM configuration with IGBT has been designed and the graphic based models of the D-STATCOM have been developed using the PSCAD/EMTDC electromagnetic transient simulation program. Accordingly, simulation is first carried out 10 illustrate the use of D-STATCOM in mitigating voltage sag in a distribution system. The D-STATCOM has been developed using DSP controller to achieve excellent overall performance. Simulation results prove that the D-STATCOM is capable of mitigating voltage sag by controlling PWM of the system using DSP board.

AB - This paper presents the design of a prototype distribution static compensator (D-STATCOM) for load compensation in an unbalanced distribution system. The D-STATCOM is intended to replace the widely used static Var compensator (SVC). The compensation scheme of the D-STATCOM is derived using the symmetrical component method. In this work, the 12-pulse D-STATCOM configuration with IGBT has been designed and the graphic based models of the D-STATCOM have been developed using the PSCAD/EMTDC electromagnetic transient simulation program. Accordingly, simulation is first carried out 10 illustrate the use of D-STATCOM in mitigating voltage sag in a distribution system. The D-STATCOM has been developed using DSP controller to achieve excellent overall performance. Simulation results prove that the D-STATCOM is capable of mitigating voltage sag by controlling PWM of the system using DSP board.

KW - Component

KW - D-Statcom load compensation

KW - Digital signal proscessing

KW - Voltage sag

UR - http://www.scopus.com/inward/record.url?scp=33847404515&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33847404515&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:33847404515

SN - 0780392965

SN - 9780780392960

VL - 1

SP - 569

EP - 574

BT - Proceedings of the International Conference on Power Electronics and Drive Systems

ER -