Design of a low voltage charge pump circuit for RFID tag

Kang Cheng Wei, Md. Mamun Ibne Reaz, Md Syedul Amin, Jubayer Jalil, Labonnah F. Rahman

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Abstract

Charge pump circuit is widely used in many systems due to its low power consumption, high performance, small area and low current drivability. This paper presents a low-voltage, high performance charge pump circuit suitable for low-voltage applications such as EEPROM of Radio Frequency Identification (RFID) tag. Designed in 0.18-m CMOS process, the proposed charge pump circuit is able to pump an input voltage of 1.8V to a measured output of 5.95V through 20MHz clock signal with each pumping capacitor of 0.1pF and smoothing capacitor of 0.1pF at the output. Simulation result shows that the proposed charged pump circuit offers higher pumping gain compared with the existing charge pump circuit. Besides the RFID tag, the charge pump circuit can also be used in other memory circuits.

Original languageEnglish
Title of host publication2012 10th IEEE International Conference on Semiconductor Electronics, ICSE 2012 - Proceedings
Pages466-469
Number of pages4
DOIs
Publication statusPublished - 2012
Externally publishedYes
Event2012 10th IEEE International Conference on Semiconductor Electronics, ICSE 2012 - Kuala Lumpur
Duration: 19 Sep 201221 Sep 2012

Other

Other2012 10th IEEE International Conference on Semiconductor Electronics, ICSE 2012
CityKuala Lumpur
Period19/9/1221/9/12

Fingerprint

Charge pump circuits
Radio frequency identification (RFID)
Electric potential
Capacitors
Pumps
Networks (circuits)
Clocks
Electric power utilization
Data storage equipment

Keywords

  • charge pump
  • CMOS
  • EEPROM
  • NVM
  • RFID

ASJC Scopus subject areas

  • Hardware and Architecture
  • Electrical and Electronic Engineering

Cite this

Wei, K. C., Ibne Reaz, M. M., Amin, M. S., Jalil, J., & Rahman, L. F. (2012). Design of a low voltage charge pump circuit for RFID tag. In 2012 10th IEEE International Conference on Semiconductor Electronics, ICSE 2012 - Proceedings (pp. 466-469). [6417187] https://doi.org/10.1109/SMElec.2012.6417187

Design of a low voltage charge pump circuit for RFID tag. / Wei, Kang Cheng; Ibne Reaz, Md. Mamun; Amin, Md Syedul; Jalil, Jubayer; Rahman, Labonnah F.

2012 10th IEEE International Conference on Semiconductor Electronics, ICSE 2012 - Proceedings. 2012. p. 466-469 6417187.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wei, KC, Ibne Reaz, MM, Amin, MS, Jalil, J & Rahman, LF 2012, Design of a low voltage charge pump circuit for RFID tag. in 2012 10th IEEE International Conference on Semiconductor Electronics, ICSE 2012 - Proceedings., 6417187, pp. 466-469, 2012 10th IEEE International Conference on Semiconductor Electronics, ICSE 2012, Kuala Lumpur, 19/9/12. https://doi.org/10.1109/SMElec.2012.6417187
Wei KC, Ibne Reaz MM, Amin MS, Jalil J, Rahman LF. Design of a low voltage charge pump circuit for RFID tag. In 2012 10th IEEE International Conference on Semiconductor Electronics, ICSE 2012 - Proceedings. 2012. p. 466-469. 6417187 https://doi.org/10.1109/SMElec.2012.6417187
Wei, Kang Cheng ; Ibne Reaz, Md. Mamun ; Amin, Md Syedul ; Jalil, Jubayer ; Rahman, Labonnah F. / Design of a low voltage charge pump circuit for RFID tag. 2012 10th IEEE International Conference on Semiconductor Electronics, ICSE 2012 - Proceedings. 2012. pp. 466-469
@inproceedings{6c87bf82bb384d48ae1681077cad00b2,
title = "Design of a low voltage charge pump circuit for RFID tag",
abstract = "Charge pump circuit is widely used in many systems due to its low power consumption, high performance, small area and low current drivability. This paper presents a low-voltage, high performance charge pump circuit suitable for low-voltage applications such as EEPROM of Radio Frequency Identification (RFID) tag. Designed in 0.18-m CMOS process, the proposed charge pump circuit is able to pump an input voltage of 1.8V to a measured output of 5.95V through 20MHz clock signal with each pumping capacitor of 0.1pF and smoothing capacitor of 0.1pF at the output. Simulation result shows that the proposed charged pump circuit offers higher pumping gain compared with the existing charge pump circuit. Besides the RFID tag, the charge pump circuit can also be used in other memory circuits.",
keywords = "charge pump, CMOS, EEPROM, NVM, RFID",
author = "Wei, {Kang Cheng} and {Ibne Reaz}, {Md. Mamun} and Amin, {Md Syedul} and Jubayer Jalil and Rahman, {Labonnah F.}",
year = "2012",
doi = "10.1109/SMElec.2012.6417187",
language = "English",
isbn = "9781467323963",
pages = "466--469",
booktitle = "2012 10th IEEE International Conference on Semiconductor Electronics, ICSE 2012 - Proceedings",

}

TY - GEN

T1 - Design of a low voltage charge pump circuit for RFID tag

AU - Wei, Kang Cheng

AU - Ibne Reaz, Md. Mamun

AU - Amin, Md Syedul

AU - Jalil, Jubayer

AU - Rahman, Labonnah F.

PY - 2012

Y1 - 2012

N2 - Charge pump circuit is widely used in many systems due to its low power consumption, high performance, small area and low current drivability. This paper presents a low-voltage, high performance charge pump circuit suitable for low-voltage applications such as EEPROM of Radio Frequency Identification (RFID) tag. Designed in 0.18-m CMOS process, the proposed charge pump circuit is able to pump an input voltage of 1.8V to a measured output of 5.95V through 20MHz clock signal with each pumping capacitor of 0.1pF and smoothing capacitor of 0.1pF at the output. Simulation result shows that the proposed charged pump circuit offers higher pumping gain compared with the existing charge pump circuit. Besides the RFID tag, the charge pump circuit can also be used in other memory circuits.

AB - Charge pump circuit is widely used in many systems due to its low power consumption, high performance, small area and low current drivability. This paper presents a low-voltage, high performance charge pump circuit suitable for low-voltage applications such as EEPROM of Radio Frequency Identification (RFID) tag. Designed in 0.18-m CMOS process, the proposed charge pump circuit is able to pump an input voltage of 1.8V to a measured output of 5.95V through 20MHz clock signal with each pumping capacitor of 0.1pF and smoothing capacitor of 0.1pF at the output. Simulation result shows that the proposed charged pump circuit offers higher pumping gain compared with the existing charge pump circuit. Besides the RFID tag, the charge pump circuit can also be used in other memory circuits.

KW - charge pump

KW - CMOS

KW - EEPROM

KW - NVM

KW - RFID

UR - http://www.scopus.com/inward/record.url?scp=84874128032&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84874128032&partnerID=8YFLogxK

U2 - 10.1109/SMElec.2012.6417187

DO - 10.1109/SMElec.2012.6417187

M3 - Conference contribution

SN - 9781467323963

SP - 466

EP - 469

BT - 2012 10th IEEE International Conference on Semiconductor Electronics, ICSE 2012 - Proceedings

ER -