Design and simulation of X-band micromachined microstrip antenna

Md Fokhrul Islam, M. A Mohd Ali, Burhanuddin Yeop Majlis

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

There is an increasing demand for newer microwave and millimeter-wave systems to meet the emerging telecommunication challenges with respect to size, performance and cost. Micro Electro Mechanical Systems (MEMS) have several desirable features, including small size, high performance, low power consumption and low loss. This paper presents an X-band probe fed small rectangular microstrip patch antenna based on high-resistivity silicon substrate which is capable to reduce the dimensions of the antenna. The antenna was designed on 0.375 mm-thik substrate using microstrip technology followed by probe feeding technique. Microstrip and probe feeding technique offer easy fabrication process using MEMS technology. The design and simulation of the antenna were performed using 3D full wave electromagnetic simulator IE3D. The antenna with a bandwidth of 118.14 MHz and a center frequency of 9.6 GHz which is within the allowable specturm (9.5-9.8GHz) for Earth Exploration Satellite System (EESS) was simulated successfully.

Original languageEnglish
Title of host publication2007 5th Student Conference on Research and Development, SCORED
DOIs
Publication statusPublished - 2007
Event2007 5th Student Conference on Research and Development, SCORED - Selangor
Duration: 11 Dec 200712 Dec 2007

Other

Other2007 5th Student Conference on Research and Development, SCORED
CitySelangor
Period11/12/0712/12/07

Fingerprint

simulation
telecommunication
performance
Simulation
demand
costs
Substrate
Microwave
Costs
Bandwidth
High performance
Telecommunications
Technology system

Keywords

  • MEMS
  • Microstrip technology
  • X-band antenna

ASJC Scopus subject areas

  • Education
  • Management Science and Operations Research

Cite this

Islam, M. F., Ali, M. A. M., & Yeop Majlis, B. (2007). Design and simulation of X-band micromachined microstrip antenna. In 2007 5th Student Conference on Research and Development, SCORED [4451435] https://doi.org/10.1109/SCORED.2007.4451435

Design and simulation of X-band micromachined microstrip antenna. / Islam, Md Fokhrul; Ali, M. A Mohd; Yeop Majlis, Burhanuddin.

2007 5th Student Conference on Research and Development, SCORED. 2007. 4451435.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Islam, MF, Ali, MAM & Yeop Majlis, B 2007, Design and simulation of X-band micromachined microstrip antenna. in 2007 5th Student Conference on Research and Development, SCORED., 4451435, 2007 5th Student Conference on Research and Development, SCORED, Selangor, 11/12/07. https://doi.org/10.1109/SCORED.2007.4451435
Islam MF, Ali MAM, Yeop Majlis B. Design and simulation of X-band micromachined microstrip antenna. In 2007 5th Student Conference on Research and Development, SCORED. 2007. 4451435 https://doi.org/10.1109/SCORED.2007.4451435
Islam, Md Fokhrul ; Ali, M. A Mohd ; Yeop Majlis, Burhanuddin. / Design and simulation of X-band micromachined microstrip antenna. 2007 5th Student Conference on Research and Development, SCORED. 2007.
@inproceedings{45ef6d69f93440e489d5ca28a512c3cb,
title = "Design and simulation of X-band micromachined microstrip antenna",
abstract = "There is an increasing demand for newer microwave and millimeter-wave systems to meet the emerging telecommunication challenges with respect to size, performance and cost. Micro Electro Mechanical Systems (MEMS) have several desirable features, including small size, high performance, low power consumption and low loss. This paper presents an X-band probe fed small rectangular microstrip patch antenna based on high-resistivity silicon substrate which is capable to reduce the dimensions of the antenna. The antenna was designed on 0.375 mm-thik substrate using microstrip technology followed by probe feeding technique. Microstrip and probe feeding technique offer easy fabrication process using MEMS technology. The design and simulation of the antenna were performed using 3D full wave electromagnetic simulator IE3D. The antenna with a bandwidth of 118.14 MHz and a center frequency of 9.6 GHz which is within the allowable specturm (9.5-9.8GHz) for Earth Exploration Satellite System (EESS) was simulated successfully.",
keywords = "MEMS, Microstrip technology, X-band antenna",
author = "Islam, {Md Fokhrul} and Ali, {M. A Mohd} and {Yeop Majlis}, Burhanuddin",
year = "2007",
doi = "10.1109/SCORED.2007.4451435",
language = "English",
isbn = "1424414709",
booktitle = "2007 5th Student Conference on Research and Development, SCORED",

}

TY - GEN

T1 - Design and simulation of X-band micromachined microstrip antenna

AU - Islam, Md Fokhrul

AU - Ali, M. A Mohd

AU - Yeop Majlis, Burhanuddin

PY - 2007

Y1 - 2007

N2 - There is an increasing demand for newer microwave and millimeter-wave systems to meet the emerging telecommunication challenges with respect to size, performance and cost. Micro Electro Mechanical Systems (MEMS) have several desirable features, including small size, high performance, low power consumption and low loss. This paper presents an X-band probe fed small rectangular microstrip patch antenna based on high-resistivity silicon substrate which is capable to reduce the dimensions of the antenna. The antenna was designed on 0.375 mm-thik substrate using microstrip technology followed by probe feeding technique. Microstrip and probe feeding technique offer easy fabrication process using MEMS technology. The design and simulation of the antenna were performed using 3D full wave electromagnetic simulator IE3D. The antenna with a bandwidth of 118.14 MHz and a center frequency of 9.6 GHz which is within the allowable specturm (9.5-9.8GHz) for Earth Exploration Satellite System (EESS) was simulated successfully.

AB - There is an increasing demand for newer microwave and millimeter-wave systems to meet the emerging telecommunication challenges with respect to size, performance and cost. Micro Electro Mechanical Systems (MEMS) have several desirable features, including small size, high performance, low power consumption and low loss. This paper presents an X-band probe fed small rectangular microstrip patch antenna based on high-resistivity silicon substrate which is capable to reduce the dimensions of the antenna. The antenna was designed on 0.375 mm-thik substrate using microstrip technology followed by probe feeding technique. Microstrip and probe feeding technique offer easy fabrication process using MEMS technology. The design and simulation of the antenna were performed using 3D full wave electromagnetic simulator IE3D. The antenna with a bandwidth of 118.14 MHz and a center frequency of 9.6 GHz which is within the allowable specturm (9.5-9.8GHz) for Earth Exploration Satellite System (EESS) was simulated successfully.

KW - MEMS

KW - Microstrip technology

KW - X-band antenna

UR - http://www.scopus.com/inward/record.url?scp=50449100961&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=50449100961&partnerID=8YFLogxK

U2 - 10.1109/SCORED.2007.4451435

DO - 10.1109/SCORED.2007.4451435

M3 - Conference contribution

AN - SCOPUS:50449100961

SN - 1424414709

SN - 9781424414703

BT - 2007 5th Student Conference on Research and Development, SCORED

ER -