Design and modeling of dilute nitride VCSEL by using DBR mirror

M. A. Hasnayeen, M. Othman, A. R. Faidz

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

We have successfully designed a GaInNAs- based vertical cavity surface emitting laser structures with precisely adjusted resonant-cavity wavelengths. GaAs/Al(GaAs) based DBR modeling have been also implemented in this paper. The theory of optical multilayer is reviewed and the Characteristics Matrix method has been used to calculate the multilayer. A step by step procedure to design VCSEL has presented where "Dilute Nitride" has used in cavity region. In this modeling the higher reflectivity has been achieved by adjusting higher refractive index in the first layer and lower refractive index for the second layer.

Original languageEnglish
Title of host publicationProceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008
Pages52-55
Number of pages4
DOIs
Publication statusPublished - 2008
Externally publishedYes
EventIEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008 - Putrajaya
Duration: 26 Aug 200828 Aug 2008

Other

OtherIEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008
CityPutrajaya
Period26/8/0828/8/08

Fingerprint

Surface emitting lasers
Nitrides
Refractive index
Mirrors
Optical multilayers
Cavity resonators
Multilayers
Wavelength

Keywords

  • Dilute Nitride (DN)
  • Distributed Bragg Reflector (DBR)
  • Vertical Cavity Surface Emitting Laser (VCSEL)

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Electrical and Electronic Engineering
  • Communication

Cite this

Hasnayeen, M. A., Othman, M., & Faidz, A. R. (2008). Design and modeling of dilute nitride VCSEL by using DBR mirror. In Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008 (pp. 52-55). [4814236] https://doi.org/10.1109/NCTT.2008.4814236

Design and modeling of dilute nitride VCSEL by using DBR mirror. / Hasnayeen, M. A.; Othman, M.; Faidz, A. R.

Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008. 2008. p. 52-55 4814236.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hasnayeen, MA, Othman, M & Faidz, AR 2008, Design and modeling of dilute nitride VCSEL by using DBR mirror. in Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008., 4814236, pp. 52-55, IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008, Putrajaya, 26/8/08. https://doi.org/10.1109/NCTT.2008.4814236
Hasnayeen MA, Othman M, Faidz AR. Design and modeling of dilute nitride VCSEL by using DBR mirror. In Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008. 2008. p. 52-55. 4814236 https://doi.org/10.1109/NCTT.2008.4814236
Hasnayeen, M. A. ; Othman, M. ; Faidz, A. R. / Design and modeling of dilute nitride VCSEL by using DBR mirror. Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008. 2008. pp. 52-55
@inproceedings{b1ed724332754874a7435b5caeedc74b,
title = "Design and modeling of dilute nitride VCSEL by using DBR mirror",
abstract = "We have successfully designed a GaInNAs- based vertical cavity surface emitting laser structures with precisely adjusted resonant-cavity wavelengths. GaAs/Al(GaAs) based DBR modeling have been also implemented in this paper. The theory of optical multilayer is reviewed and the Characteristics Matrix method has been used to calculate the multilayer. A step by step procedure to design VCSEL has presented where {"}Dilute Nitride{"} has used in cavity region. In this modeling the higher reflectivity has been achieved by adjusting higher refractive index in the first layer and lower refractive index for the second layer.",
keywords = "Dilute Nitride (DN), Distributed Bragg Reflector (DBR), Vertical Cavity Surface Emitting Laser (VCSEL)",
author = "Hasnayeen, {M. A.} and M. Othman and Faidz, {A. R.}",
year = "2008",
doi = "10.1109/NCTT.2008.4814236",
language = "English",
isbn = "9781424422159",
pages = "52--55",
booktitle = "Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008",

}

TY - GEN

T1 - Design and modeling of dilute nitride VCSEL by using DBR mirror

AU - Hasnayeen, M. A.

AU - Othman, M.

AU - Faidz, A. R.

PY - 2008

Y1 - 2008

N2 - We have successfully designed a GaInNAs- based vertical cavity surface emitting laser structures with precisely adjusted resonant-cavity wavelengths. GaAs/Al(GaAs) based DBR modeling have been also implemented in this paper. The theory of optical multilayer is reviewed and the Characteristics Matrix method has been used to calculate the multilayer. A step by step procedure to design VCSEL has presented where "Dilute Nitride" has used in cavity region. In this modeling the higher reflectivity has been achieved by adjusting higher refractive index in the first layer and lower refractive index for the second layer.

AB - We have successfully designed a GaInNAs- based vertical cavity surface emitting laser structures with precisely adjusted resonant-cavity wavelengths. GaAs/Al(GaAs) based DBR modeling have been also implemented in this paper. The theory of optical multilayer is reviewed and the Characteristics Matrix method has been used to calculate the multilayer. A step by step procedure to design VCSEL has presented where "Dilute Nitride" has used in cavity region. In this modeling the higher reflectivity has been achieved by adjusting higher refractive index in the first layer and lower refractive index for the second layer.

KW - Dilute Nitride (DN)

KW - Distributed Bragg Reflector (DBR)

KW - Vertical Cavity Surface Emitting Laser (VCSEL)

UR - http://www.scopus.com/inward/record.url?scp=67650118794&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=67650118794&partnerID=8YFLogxK

U2 - 10.1109/NCTT.2008.4814236

DO - 10.1109/NCTT.2008.4814236

M3 - Conference contribution

AN - SCOPUS:67650118794

SN - 9781424422159

SP - 52

EP - 55

BT - Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, NCTT-MCP 2008

ER -