Design and implementation of interface circuitry for CMOS-based SAW gas sensors

F. M. Yasin, K. F. Tye, Md. Mamun Ibne Reaz

Research output: Chapter in Book/Report/Conference proceedingConference contribution

14 Citations (Scopus)

Abstract

The design and development of interface circuitries for CMOS-based SAW gas sensor is presented in this paper. The SAW sensor devices typically run at RF, requiring most design to have complex signal conditioning circuitry. Our approach attempt to design a simple architecture with reduced power consumption. The SAW sensors operate at 354MHz. Simulation data show that the interface circuitries are ten times smaller with lower power supply, compare to existing work.

Original languageEnglish
Title of host publicationProceedings - IEEE International SOC Conference
EditorsD. Ha, R. Krishnamurthy, S. Kim, A. Marshall
Pages161-164
Number of pages4
Publication statusPublished - 2005
Externally publishedYes
Event2005 IEEE International SOC Conference - Herndon, VA
Duration: 25 Sep 200528 Sep 2005

Other

Other2005 IEEE International SOC Conference
CityHerndon, VA
Period25/9/0528/9/05

Fingerprint

Chemical sensors
Sensors
Signal processing
Electric power utilization

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Yasin, F. M., Tye, K. F., & Ibne Reaz, M. M. (2005). Design and implementation of interface circuitry for CMOS-based SAW gas sensors. In D. Ha, R. Krishnamurthy, S. Kim, & A. Marshall (Eds.), Proceedings - IEEE International SOC Conference (pp. 161-164). [TA2.2]

Design and implementation of interface circuitry for CMOS-based SAW gas sensors. / Yasin, F. M.; Tye, K. F.; Ibne Reaz, Md. Mamun.

Proceedings - IEEE International SOC Conference. ed. / D. Ha; R. Krishnamurthy; S. Kim; A. Marshall. 2005. p. 161-164 TA2.2.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Yasin, FM, Tye, KF & Ibne Reaz, MM 2005, Design and implementation of interface circuitry for CMOS-based SAW gas sensors. in D Ha, R Krishnamurthy, S Kim & A Marshall (eds), Proceedings - IEEE International SOC Conference., TA2.2, pp. 161-164, 2005 IEEE International SOC Conference, Herndon, VA, 25/9/05.
Yasin FM, Tye KF, Ibne Reaz MM. Design and implementation of interface circuitry for CMOS-based SAW gas sensors. In Ha D, Krishnamurthy R, Kim S, Marshall A, editors, Proceedings - IEEE International SOC Conference. 2005. p. 161-164. TA2.2
Yasin, F. M. ; Tye, K. F. ; Ibne Reaz, Md. Mamun. / Design and implementation of interface circuitry for CMOS-based SAW gas sensors. Proceedings - IEEE International SOC Conference. editor / D. Ha ; R. Krishnamurthy ; S. Kim ; A. Marshall. 2005. pp. 161-164
@inproceedings{72537e8c446e401d8ea67606007b9629,
title = "Design and implementation of interface circuitry for CMOS-based SAW gas sensors",
abstract = "The design and development of interface circuitries for CMOS-based SAW gas sensor is presented in this paper. The SAW sensor devices typically run at RF, requiring most design to have complex signal conditioning circuitry. Our approach attempt to design a simple architecture with reduced power consumption. The SAW sensors operate at 354MHz. Simulation data show that the interface circuitries are ten times smaller with lower power supply, compare to existing work.",
author = "Yasin, {F. M.} and Tye, {K. F.} and {Ibne Reaz}, {Md. Mamun}",
year = "2005",
language = "English",
isbn = "0780392647",
pages = "161--164",
editor = "D. Ha and R. Krishnamurthy and S. Kim and A. Marshall",
booktitle = "Proceedings - IEEE International SOC Conference",

}

TY - GEN

T1 - Design and implementation of interface circuitry for CMOS-based SAW gas sensors

AU - Yasin, F. M.

AU - Tye, K. F.

AU - Ibne Reaz, Md. Mamun

PY - 2005

Y1 - 2005

N2 - The design and development of interface circuitries for CMOS-based SAW gas sensor is presented in this paper. The SAW sensor devices typically run at RF, requiring most design to have complex signal conditioning circuitry. Our approach attempt to design a simple architecture with reduced power consumption. The SAW sensors operate at 354MHz. Simulation data show that the interface circuitries are ten times smaller with lower power supply, compare to existing work.

AB - The design and development of interface circuitries for CMOS-based SAW gas sensor is presented in this paper. The SAW sensor devices typically run at RF, requiring most design to have complex signal conditioning circuitry. Our approach attempt to design a simple architecture with reduced power consumption. The SAW sensors operate at 354MHz. Simulation data show that the interface circuitries are ten times smaller with lower power supply, compare to existing work.

UR - http://www.scopus.com/inward/record.url?scp=30844433074&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=30844433074&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:30844433074

SN - 0780392647

SP - 161

EP - 164

BT - Proceedings - IEEE International SOC Conference

A2 - Ha, D.

A2 - Krishnamurthy, R.

A2 - Kim, S.

A2 - Marshall, A.

ER -