Crushing behavior of hybrid foam-filled pultruded composite under quasi-static oblique loading

Shahrum Abdullah, A. A. Arifin, A. Othman, Ahmad Kamal Ariffin Mohd Ihsan, N. A N Mohamed

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Abstract

In this present paper, the two square cross-section pultruded composite tubes E-glass reinforced polyester unfilled and polyurethane hybrid foam-filled subjected to oblique load are investigated and examined experimentally. The oblique angles were varied from 5 to 20 with an increment of every 5 degree. The bottom base platen of clamped specimen was adjusted inclination angle of loading direction with respect to the tube axis. During the experimental observation, three characteristic crushing stages were identified as initial peak load stage, progressive crushing stage and compaction zone stage. The pultruded composite tube wall-thicknesses of at 3 mm were examined, and the effects of crushing behaviors and failure modes were analyzed and discussed. Results showed that the tube's energy absorption capability was affected significantly by varying of oblique loading. It is also found that as the filling polyurethane foam into pultruded E-glass reinforced polyester composite square tube increases the amount of specific absorbed energy than the empty tubes.

Original languageEnglish
Title of host publicationAdvanced Materials Research
Pages649-653
Number of pages5
Volume664
DOIs
Publication statusPublished - 2013
Event2012 International Conference on Environmental and Materials Engineering, EME 2012 - Seoul
Duration: 9 Dec 201210 Dec 2012

Publication series

NameAdvanced Materials Research
Volume664
ISSN (Print)10226680

Other

Other2012 International Conference on Environmental and Materials Engineering, EME 2012
CitySeoul
Period9/12/1210/12/12

Fingerprint

Crushing
Foams
Polyurethanes
Polyesters
Composite materials
Glass
Energy absorption
Failure modes
Compaction

Keywords

  • Foam-filled
  • Oblique loading
  • Pultruded composite
  • Specific energy absorption

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Abdullah, S., Arifin, A. A., Othman, A., Mohd Ihsan, A. K. A., & Mohamed, N. A. N. (2013). Crushing behavior of hybrid foam-filled pultruded composite under quasi-static oblique loading. In Advanced Materials Research (Vol. 664, pp. 649-653). (Advanced Materials Research; Vol. 664). https://doi.org/10.4028/www.scientific.net/AMR.664.649

Crushing behavior of hybrid foam-filled pultruded composite under quasi-static oblique loading. / Abdullah, Shahrum; Arifin, A. A.; Othman, A.; Mohd Ihsan, Ahmad Kamal Ariffin; Mohamed, N. A N.

Advanced Materials Research. Vol. 664 2013. p. 649-653 (Advanced Materials Research; Vol. 664).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abdullah, S, Arifin, AA, Othman, A, Mohd Ihsan, AKA & Mohamed, NAN 2013, Crushing behavior of hybrid foam-filled pultruded composite under quasi-static oblique loading. in Advanced Materials Research. vol. 664, Advanced Materials Research, vol. 664, pp. 649-653, 2012 International Conference on Environmental and Materials Engineering, EME 2012, Seoul, 9/12/12. https://doi.org/10.4028/www.scientific.net/AMR.664.649
Abdullah S, Arifin AA, Othman A, Mohd Ihsan AKA, Mohamed NAN. Crushing behavior of hybrid foam-filled pultruded composite under quasi-static oblique loading. In Advanced Materials Research. Vol. 664. 2013. p. 649-653. (Advanced Materials Research). https://doi.org/10.4028/www.scientific.net/AMR.664.649
Abdullah, Shahrum ; Arifin, A. A. ; Othman, A. ; Mohd Ihsan, Ahmad Kamal Ariffin ; Mohamed, N. A N. / Crushing behavior of hybrid foam-filled pultruded composite under quasi-static oblique loading. Advanced Materials Research. Vol. 664 2013. pp. 649-653 (Advanced Materials Research).
@inproceedings{e345ac8a22594af2b41411dfc5babc8c,
title = "Crushing behavior of hybrid foam-filled pultruded composite under quasi-static oblique loading",
abstract = "In this present paper, the two square cross-section pultruded composite tubes E-glass reinforced polyester unfilled and polyurethane hybrid foam-filled subjected to oblique load are investigated and examined experimentally. The oblique angles were varied from 5 to 20 with an increment of every 5 degree. The bottom base platen of clamped specimen was adjusted inclination angle of loading direction with respect to the tube axis. During the experimental observation, three characteristic crushing stages were identified as initial peak load stage, progressive crushing stage and compaction zone stage. The pultruded composite tube wall-thicknesses of at 3 mm were examined, and the effects of crushing behaviors and failure modes were analyzed and discussed. Results showed that the tube's energy absorption capability was affected significantly by varying of oblique loading. It is also found that as the filling polyurethane foam into pultruded E-glass reinforced polyester composite square tube increases the amount of specific absorbed energy than the empty tubes.",
keywords = "Foam-filled, Oblique loading, Pultruded composite, Specific energy absorption",
author = "Shahrum Abdullah and Arifin, {A. A.} and A. Othman and {Mohd Ihsan}, {Ahmad Kamal Ariffin} and Mohamed, {N. A N}",
year = "2013",
doi = "10.4028/www.scientific.net/AMR.664.649",
language = "English",
isbn = "9783037856017",
volume = "664",
series = "Advanced Materials Research",
pages = "649--653",
booktitle = "Advanced Materials Research",

}

TY - GEN

T1 - Crushing behavior of hybrid foam-filled pultruded composite under quasi-static oblique loading

AU - Abdullah, Shahrum

AU - Arifin, A. A.

AU - Othman, A.

AU - Mohd Ihsan, Ahmad Kamal Ariffin

AU - Mohamed, N. A N

PY - 2013

Y1 - 2013

N2 - In this present paper, the two square cross-section pultruded composite tubes E-glass reinforced polyester unfilled and polyurethane hybrid foam-filled subjected to oblique load are investigated and examined experimentally. The oblique angles were varied from 5 to 20 with an increment of every 5 degree. The bottom base platen of clamped specimen was adjusted inclination angle of loading direction with respect to the tube axis. During the experimental observation, three characteristic crushing stages were identified as initial peak load stage, progressive crushing stage and compaction zone stage. The pultruded composite tube wall-thicknesses of at 3 mm were examined, and the effects of crushing behaviors and failure modes were analyzed and discussed. Results showed that the tube's energy absorption capability was affected significantly by varying of oblique loading. It is also found that as the filling polyurethane foam into pultruded E-glass reinforced polyester composite square tube increases the amount of specific absorbed energy than the empty tubes.

AB - In this present paper, the two square cross-section pultruded composite tubes E-glass reinforced polyester unfilled and polyurethane hybrid foam-filled subjected to oblique load are investigated and examined experimentally. The oblique angles were varied from 5 to 20 with an increment of every 5 degree. The bottom base platen of clamped specimen was adjusted inclination angle of loading direction with respect to the tube axis. During the experimental observation, three characteristic crushing stages were identified as initial peak load stage, progressive crushing stage and compaction zone stage. The pultruded composite tube wall-thicknesses of at 3 mm were examined, and the effects of crushing behaviors and failure modes were analyzed and discussed. Results showed that the tube's energy absorption capability was affected significantly by varying of oblique loading. It is also found that as the filling polyurethane foam into pultruded E-glass reinforced polyester composite square tube increases the amount of specific absorbed energy than the empty tubes.

KW - Foam-filled

KW - Oblique loading

KW - Pultruded composite

KW - Specific energy absorption

UR - http://www.scopus.com/inward/record.url?scp=84874817071&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84874817071&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMR.664.649

DO - 10.4028/www.scientific.net/AMR.664.649

M3 - Conference contribution

AN - SCOPUS:84874817071

SN - 9783037856017

VL - 664

T3 - Advanced Materials Research

SP - 649

EP - 653

BT - Advanced Materials Research

ER -