Composite joints subject to reversal of loading-Part 1: Experimental study

J. Y Richard Liew, T. H. Teo, N. E. Shanmugam

Research output: Contribution to journalArticle

46 Citations (Scopus)

Abstract

This paper is concerned with the tests on composite beam-to-column joints subject to reversal of loads. The first phase of the tests consisting of six beam-to-column joint specimens subject to negative moment was reported earlier [J. Construct. Steel Res. 2000; 56: 117-50]. In the current phase, eight cruciform composite joint specimens were tested under reversal of loads so that one side of the beam-to-column connection was under negative moment and the other side under positive moment. The beam-to-column steelwork connections were made of bolted end plate with or without an extended haunch section. The columns were either bare steel or reinforced with doubler plate or partially encased with concrete. The moment-rotation relationships for the joints were obtained experimentally. Detailed test observations and results were reported. Analytical assessments of the ultimate moment and initial elastic stiffness of the joints tested are provided in the companion paper [J. Construct. Steel Res. 2003; doi:10.1016/j.jcsr.2003.08.011].

Original languageEnglish
Pages (from-to)221-246
Number of pages26
JournalJournal of Constructional Steel Research
Volume60
Issue number2
DOIs
Publication statusPublished - Feb 2004
Externally publishedYes

Fingerprint

Steel
Composite materials
Stiffness
Concretes

Keywords

  • Component method
  • Composite joint
  • Cyclic loading
  • Join behaviour
  • Moment rotational response
  • Rotational capacity

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Materials Science(all)

Cite this

Composite joints subject to reversal of loading-Part 1 : Experimental study. / Liew, J. Y Richard; Teo, T. H.; Shanmugam, N. E.

In: Journal of Constructional Steel Research, Vol. 60, No. 2, 02.2004, p. 221-246.

Research output: Contribution to journalArticle

Liew, J. Y Richard ; Teo, T. H. ; Shanmugam, N. E. / Composite joints subject to reversal of loading-Part 1 : Experimental study. In: Journal of Constructional Steel Research. 2004 ; Vol. 60, No. 2. pp. 221-246.
@article{763891f74b3f4cb3bd3e98f9b4504166,
title = "Composite joints subject to reversal of loading-Part 1: Experimental study",
abstract = "This paper is concerned with the tests on composite beam-to-column joints subject to reversal of loads. The first phase of the tests consisting of six beam-to-column joint specimens subject to negative moment was reported earlier [J. Construct. Steel Res. 2000; 56: 117-50]. In the current phase, eight cruciform composite joint specimens were tested under reversal of loads so that one side of the beam-to-column connection was under negative moment and the other side under positive moment. The beam-to-column steelwork connections were made of bolted end plate with or without an extended haunch section. The columns were either bare steel or reinforced with doubler plate or partially encased with concrete. The moment-rotation relationships for the joints were obtained experimentally. Detailed test observations and results were reported. Analytical assessments of the ultimate moment and initial elastic stiffness of the joints tested are provided in the companion paper [J. Construct. Steel Res. 2003; doi:10.1016/j.jcsr.2003.08.011].",
keywords = "Component method, Composite joint, Cyclic loading, Join behaviour, Moment rotational response, Rotational capacity",
author = "Liew, {J. Y Richard} and Teo, {T. H.} and Shanmugam, {N. E.}",
year = "2004",
month = "2",
doi = "10.1016/j.jcsr.2003.08.010",
language = "English",
volume = "60",
pages = "221--246",
journal = "Journal of Constructional Steel Research",
issn = "0143-974X",
publisher = "Elsevier BV",
number = "2",

}

TY - JOUR

T1 - Composite joints subject to reversal of loading-Part 1

T2 - Experimental study

AU - Liew, J. Y Richard

AU - Teo, T. H.

AU - Shanmugam, N. E.

PY - 2004/2

Y1 - 2004/2

N2 - This paper is concerned with the tests on composite beam-to-column joints subject to reversal of loads. The first phase of the tests consisting of six beam-to-column joint specimens subject to negative moment was reported earlier [J. Construct. Steel Res. 2000; 56: 117-50]. In the current phase, eight cruciform composite joint specimens were tested under reversal of loads so that one side of the beam-to-column connection was under negative moment and the other side under positive moment. The beam-to-column steelwork connections were made of bolted end plate with or without an extended haunch section. The columns were either bare steel or reinforced with doubler plate or partially encased with concrete. The moment-rotation relationships for the joints were obtained experimentally. Detailed test observations and results were reported. Analytical assessments of the ultimate moment and initial elastic stiffness of the joints tested are provided in the companion paper [J. Construct. Steel Res. 2003; doi:10.1016/j.jcsr.2003.08.011].

AB - This paper is concerned with the tests on composite beam-to-column joints subject to reversal of loads. The first phase of the tests consisting of six beam-to-column joint specimens subject to negative moment was reported earlier [J. Construct. Steel Res. 2000; 56: 117-50]. In the current phase, eight cruciform composite joint specimens were tested under reversal of loads so that one side of the beam-to-column connection was under negative moment and the other side under positive moment. The beam-to-column steelwork connections were made of bolted end plate with or without an extended haunch section. The columns were either bare steel or reinforced with doubler plate or partially encased with concrete. The moment-rotation relationships for the joints were obtained experimentally. Detailed test observations and results were reported. Analytical assessments of the ultimate moment and initial elastic stiffness of the joints tested are provided in the companion paper [J. Construct. Steel Res. 2003; doi:10.1016/j.jcsr.2003.08.011].

KW - Component method

KW - Composite joint

KW - Cyclic loading

KW - Join behaviour

KW - Moment rotational response

KW - Rotational capacity

UR - http://www.scopus.com/inward/record.url?scp=0942291481&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0942291481&partnerID=8YFLogxK

U2 - 10.1016/j.jcsr.2003.08.010

DO - 10.1016/j.jcsr.2003.08.010

M3 - Article

AN - SCOPUS:0942291481

VL - 60

SP - 221

EP - 246

JO - Journal of Constructional Steel Research

JF - Journal of Constructional Steel Research

SN - 0143-974X

IS - 2

ER -