Charging and discharging control of Li-Ion battery energy management for Electric vehicle application

M. Verasamy, M. Faisal, Pin Jern Ker, Hannan M A

Research output: Contribution to journalArticle

Abstract

Electric vehicle (EV) is now replacing the conventional fuel driven vehicle as it has strong contribution to face the challenges of global warming issues. This system has the energy storage device which can be introduced by lithium-ion (li-ion) battery banks. Lithium-ion is mostly popular because of its high capacity and efficiency. Nevertheless, li-ion battery needs protective mechanism to control overcharged or undercharged of the cell that can reduce the life expectancy and efficiency. Hence, a control model needs to develop to enhance the protection of battery. Therefore, the key issue of the research is to investigate the performance of Li-ion battery energy management system (BMS) for electrical vehicle applications by monitoring and balancing the cell voltage level of battery banks using Simulink software. A bidirectional flyback DC-DC converter is investigated in the BMS model to control the under-charging or overcharging of cells. An intelligent charge control algorithm is used for this purpose. Backtracking search optimization algorithm (BSA) is implemented to optimize the parameters for generating regulated PWM signal. Obtained results were observed within the safety operating range of Li-ion battery (3.73 V - 3.87V).

Original languageEnglish
Pages (from-to)482-486
Number of pages5
JournalInternational Journal of Engineering and Technology(UAE)
Volume7
Issue number4
DOIs
Publication statusPublished - 1 Jan 2018
Externally publishedYes

Fingerprint

Energy management
Electric vehicles
Ions
Energy management systems
Lithium
DC-DC converters
Global warming
Global Warming
Pulse width modulation
Energy storage
Life Expectancy
Software
Lithium-ion batteries
Monitoring
Electric potential
Safety
Equipment and Supplies
Research

Keywords

  • Battery energy management
  • Charge equalization
  • Electric Vehicle
  • Optimization
  • Protection

ASJC Scopus subject areas

  • Biotechnology
  • Computer Science (miscellaneous)
  • Environmental Engineering
  • Chemical Engineering(all)
  • Engineering(all)
  • Hardware and Architecture

Cite this

Charging and discharging control of Li-Ion battery energy management for Electric vehicle application. / Verasamy, M.; Faisal, M.; Ker, Pin Jern; M A, Hannan.

In: International Journal of Engineering and Technology(UAE), Vol. 7, No. 4, 01.01.2018, p. 482-486.

Research output: Contribution to journalArticle

@article{9760dd8a850c4b80890b6df262bdf7e1,
title = "Charging and discharging control of Li-Ion battery energy management for Electric vehicle application",
abstract = "Electric vehicle (EV) is now replacing the conventional fuel driven vehicle as it has strong contribution to face the challenges of global warming issues. This system has the energy storage device which can be introduced by lithium-ion (li-ion) battery banks. Lithium-ion is mostly popular because of its high capacity and efficiency. Nevertheless, li-ion battery needs protective mechanism to control overcharged or undercharged of the cell that can reduce the life expectancy and efficiency. Hence, a control model needs to develop to enhance the protection of battery. Therefore, the key issue of the research is to investigate the performance of Li-ion battery energy management system (BMS) for electrical vehicle applications by monitoring and balancing the cell voltage level of battery banks using Simulink software. A bidirectional flyback DC-DC converter is investigated in the BMS model to control the under-charging or overcharging of cells. An intelligent charge control algorithm is used for this purpose. Backtracking search optimization algorithm (BSA) is implemented to optimize the parameters for generating regulated PWM signal. Obtained results were observed within the safety operating range of Li-ion battery (3.73 V - 3.87V).",
keywords = "Battery energy management, Charge equalization, Electric Vehicle, Optimization, Protection",
author = "M. Verasamy and M. Faisal and Ker, {Pin Jern} and {M A}, Hannan",
year = "2018",
month = "1",
day = "1",
doi = "10.14419/ijet.v7i4.35.22895",
language = "English",
volume = "7",
pages = "482--486",
journal = "International Journal of Engineering and Technology(UAE)",
issn = "2227-524X",
publisher = "Science Publishing Corporation Inc",
number = "4",

}

TY - JOUR

T1 - Charging and discharging control of Li-Ion battery energy management for Electric vehicle application

AU - Verasamy, M.

AU - Faisal, M.

AU - Ker, Pin Jern

AU - M A, Hannan

PY - 2018/1/1

Y1 - 2018/1/1

N2 - Electric vehicle (EV) is now replacing the conventional fuel driven vehicle as it has strong contribution to face the challenges of global warming issues. This system has the energy storage device which can be introduced by lithium-ion (li-ion) battery banks. Lithium-ion is mostly popular because of its high capacity and efficiency. Nevertheless, li-ion battery needs protective mechanism to control overcharged or undercharged of the cell that can reduce the life expectancy and efficiency. Hence, a control model needs to develop to enhance the protection of battery. Therefore, the key issue of the research is to investigate the performance of Li-ion battery energy management system (BMS) for electrical vehicle applications by monitoring and balancing the cell voltage level of battery banks using Simulink software. A bidirectional flyback DC-DC converter is investigated in the BMS model to control the under-charging or overcharging of cells. An intelligent charge control algorithm is used for this purpose. Backtracking search optimization algorithm (BSA) is implemented to optimize the parameters for generating regulated PWM signal. Obtained results were observed within the safety operating range of Li-ion battery (3.73 V - 3.87V).

AB - Electric vehicle (EV) is now replacing the conventional fuel driven vehicle as it has strong contribution to face the challenges of global warming issues. This system has the energy storage device which can be introduced by lithium-ion (li-ion) battery banks. Lithium-ion is mostly popular because of its high capacity and efficiency. Nevertheless, li-ion battery needs protective mechanism to control overcharged or undercharged of the cell that can reduce the life expectancy and efficiency. Hence, a control model needs to develop to enhance the protection of battery. Therefore, the key issue of the research is to investigate the performance of Li-ion battery energy management system (BMS) for electrical vehicle applications by monitoring and balancing the cell voltage level of battery banks using Simulink software. A bidirectional flyback DC-DC converter is investigated in the BMS model to control the under-charging or overcharging of cells. An intelligent charge control algorithm is used for this purpose. Backtracking search optimization algorithm (BSA) is implemented to optimize the parameters for generating regulated PWM signal. Obtained results were observed within the safety operating range of Li-ion battery (3.73 V - 3.87V).

KW - Battery energy management

KW - Charge equalization

KW - Electric Vehicle

KW - Optimization

KW - Protection

UR - http://www.scopus.com/inward/record.url?scp=85059226844&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85059226844&partnerID=8YFLogxK

U2 - 10.14419/ijet.v7i4.35.22895

DO - 10.14419/ijet.v7i4.35.22895

M3 - Article

AN - SCOPUS:85059226844

VL - 7

SP - 482

EP - 486

JO - International Journal of Engineering and Technology(UAE)

JF - International Journal of Engineering and Technology(UAE)

SN - 2227-524X

IS - 4

ER -