Characterization of fluoro-doped tin oxide films prepared by newly approached of inkjet printing methods

Wan Zurina Samad, Mohd. Ambar Yarmo, Muhamad Mat Salleh

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

A comparison study on deposition temperature between 40°C and 60°C using new route coating which is inkjet printing technique have been studied in this research paper. The FTO material were prepared by a common mixture technique between precursor solution of SnCl4.5H2O and NH4F as a doping agent. The prepared samples were coated on the glass substrate sized 20mm × 25mm and were calcined at 450°C. The samples were characterized using XRD, XPS, VP-SEM and UV-VIS. From the VP-SEM, the result show the different surface morphology between the two deposition temperatures. Samples prepared at 60°C shows a lot existence some kind of crystal shape on the substrate compared to films deposited at 40°C. Surface studies using XPS technique shows the existence of elements such as Sn, O and F. Detail analysis of these elements shows that Sn 3d5/2 form as Sn-O, O1s as oxygen linkage and F1s as Sn-F. The XPS and XRD results also shows that no significant changes on chemical stoichiometry for both deposition temperatures. The optimum optical properties with lower resistivity were found for thin films deposited at 40°C with 91 %T and 16 Ω/□.

Original languageEnglish
Title of host publicationAdvanced Materials Research
Pages128-133
Number of pages6
Volume173
DOIs
Publication statusPublished - 2011
EventInternational Conference on X-ray and Related Techniques in Research and Industry, IXCRI 2010 - Langkawi Island
Duration: 9 Jun 201010 Jun 2010

Publication series

NameAdvanced Materials Research
Volume173
ISSN (Print)10226680

Other

OtherInternational Conference on X-ray and Related Techniques in Research and Industry, IXCRI 2010
CityLangkawi Island
Period9/6/1010/6/10

Fingerprint

Tin oxides
Oxide films
Printing
X ray photoelectron spectroscopy
Scanning electron microscopy
Substrates
Stoichiometry
Temperature
Surface morphology
Optical properties
Doping (additives)
Glass
Thin films
Coatings
Crystals
Oxygen

Keywords

  • Fluoro doped tin oxide
  • Inkjet printing
  • Spin coating
  • Thin films
  • Transparent conducting oxides

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Samad, W. Z., Yarmo, M. A., & Mat Salleh, M. (2011). Characterization of fluoro-doped tin oxide films prepared by newly approached of inkjet printing methods. In Advanced Materials Research (Vol. 173, pp. 128-133). (Advanced Materials Research; Vol. 173). https://doi.org/10.4028/www.scientific.net/AMR.173.128

Characterization of fluoro-doped tin oxide films prepared by newly approached of inkjet printing methods. / Samad, Wan Zurina; Yarmo, Mohd. Ambar; Mat Salleh, Muhamad.

Advanced Materials Research. Vol. 173 2011. p. 128-133 (Advanced Materials Research; Vol. 173).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Samad, WZ, Yarmo, MA & Mat Salleh, M 2011, Characterization of fluoro-doped tin oxide films prepared by newly approached of inkjet printing methods. in Advanced Materials Research. vol. 173, Advanced Materials Research, vol. 173, pp. 128-133, International Conference on X-ray and Related Techniques in Research and Industry, IXCRI 2010, Langkawi Island, 9/6/10. https://doi.org/10.4028/www.scientific.net/AMR.173.128
Samad WZ, Yarmo MA, Mat Salleh M. Characterization of fluoro-doped tin oxide films prepared by newly approached of inkjet printing methods. In Advanced Materials Research. Vol. 173. 2011. p. 128-133. (Advanced Materials Research). https://doi.org/10.4028/www.scientific.net/AMR.173.128
Samad, Wan Zurina ; Yarmo, Mohd. Ambar ; Mat Salleh, Muhamad. / Characterization of fluoro-doped tin oxide films prepared by newly approached of inkjet printing methods. Advanced Materials Research. Vol. 173 2011. pp. 128-133 (Advanced Materials Research).
@inproceedings{e6a3da6d050e4dc6b628908dcb651ae0,
title = "Characterization of fluoro-doped tin oxide films prepared by newly approached of inkjet printing methods",
abstract = "A comparison study on deposition temperature between 40°C and 60°C using new route coating which is inkjet printing technique have been studied in this research paper. The FTO material were prepared by a common mixture technique between precursor solution of SnCl4.5H2O and NH4F as a doping agent. The prepared samples were coated on the glass substrate sized 20mm × 25mm and were calcined at 450°C. The samples were characterized using XRD, XPS, VP-SEM and UV-VIS. From the VP-SEM, the result show the different surface morphology between the two deposition temperatures. Samples prepared at 60°C shows a lot existence some kind of crystal shape on the substrate compared to films deposited at 40°C. Surface studies using XPS technique shows the existence of elements such as Sn, O and F. Detail analysis of these elements shows that Sn 3d5/2 form as Sn-O, O1s as oxygen linkage and F1s as Sn-F. The XPS and XRD results also shows that no significant changes on chemical stoichiometry for both deposition temperatures. The optimum optical properties with lower resistivity were found for thin films deposited at 40°C with 91 {\%}T and 16 Ω/□.",
keywords = "Fluoro doped tin oxide, Inkjet printing, Spin coating, Thin films, Transparent conducting oxides",
author = "Samad, {Wan Zurina} and Yarmo, {Mohd. Ambar} and {Mat Salleh}, Muhamad",
year = "2011",
doi = "10.4028/www.scientific.net/AMR.173.128",
language = "English",
isbn = "9783037850039",
volume = "173",
series = "Advanced Materials Research",
pages = "128--133",
booktitle = "Advanced Materials Research",

}

TY - GEN

T1 - Characterization of fluoro-doped tin oxide films prepared by newly approached of inkjet printing methods

AU - Samad, Wan Zurina

AU - Yarmo, Mohd. Ambar

AU - Mat Salleh, Muhamad

PY - 2011

Y1 - 2011

N2 - A comparison study on deposition temperature between 40°C and 60°C using new route coating which is inkjet printing technique have been studied in this research paper. The FTO material were prepared by a common mixture technique between precursor solution of SnCl4.5H2O and NH4F as a doping agent. The prepared samples were coated on the glass substrate sized 20mm × 25mm and were calcined at 450°C. The samples were characterized using XRD, XPS, VP-SEM and UV-VIS. From the VP-SEM, the result show the different surface morphology between the two deposition temperatures. Samples prepared at 60°C shows a lot existence some kind of crystal shape on the substrate compared to films deposited at 40°C. Surface studies using XPS technique shows the existence of elements such as Sn, O and F. Detail analysis of these elements shows that Sn 3d5/2 form as Sn-O, O1s as oxygen linkage and F1s as Sn-F. The XPS and XRD results also shows that no significant changes on chemical stoichiometry for both deposition temperatures. The optimum optical properties with lower resistivity were found for thin films deposited at 40°C with 91 %T and 16 Ω/□.

AB - A comparison study on deposition temperature between 40°C and 60°C using new route coating which is inkjet printing technique have been studied in this research paper. The FTO material were prepared by a common mixture technique between precursor solution of SnCl4.5H2O and NH4F as a doping agent. The prepared samples were coated on the glass substrate sized 20mm × 25mm and were calcined at 450°C. The samples were characterized using XRD, XPS, VP-SEM and UV-VIS. From the VP-SEM, the result show the different surface morphology between the two deposition temperatures. Samples prepared at 60°C shows a lot existence some kind of crystal shape on the substrate compared to films deposited at 40°C. Surface studies using XPS technique shows the existence of elements such as Sn, O and F. Detail analysis of these elements shows that Sn 3d5/2 form as Sn-O, O1s as oxygen linkage and F1s as Sn-F. The XPS and XRD results also shows that no significant changes on chemical stoichiometry for both deposition temperatures. The optimum optical properties with lower resistivity were found for thin films deposited at 40°C with 91 %T and 16 Ω/□.

KW - Fluoro doped tin oxide

KW - Inkjet printing

KW - Spin coating

KW - Thin films

KW - Transparent conducting oxides

UR - http://www.scopus.com/inward/record.url?scp=78651442117&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78651442117&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMR.173.128

DO - 10.4028/www.scientific.net/AMR.173.128

M3 - Conference contribution

AN - SCOPUS:78651442117

SN - 9783037850039

VL - 173

T3 - Advanced Materials Research

SP - 128

EP - 133

BT - Advanced Materials Research

ER -