Behavior of chopped strand mat and woven roving under bending

Ahmad Mubarak Tajul Arifin, Shahrum Abdullah, Rozli Zulkifli, Dzuraidah Abd. Wahab, Mohammad Rafiquzzaman

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

In this study, lamination panels were fabricated using chopped strand mat (CSM) and woven roving fabric (WR) as reinforcement for two different types of specimens, type Eb and type Pb, respectively. By a combination of plain materials composite lamination structures were formed, with [CSM/0/90/CSM]2s as an orientation layer for the structures. In this research study, the structural panel was produced by hand lay-up technique with a combination of unsaturated epoxy and polyester resin, separately. Therefore, with this publication, a characteristic combination of chopped strand mat/woven roving fabric, are presented. The experimental work for both types of specimens were performed by bending until the structure fails. The characteristics of different materials, i. e. the chemicals used and the composite lamination structure, were studied, because there are different types of damages in the structure of composite materials, such as delamination, matrix cracking, fiber-matrix damage and fiber pull-out. Furthermore, it can affect the behavior of composite materials in the whole structure. As a result, this process contributes to failure prevention, as the capabilities of the structures are known, before it can be used for any part, component or area. It was also shown that different configuration lamination layers influence the strength properties of the composite materials.

Original languageEnglish
Pages (from-to)994-1000
Number of pages7
JournalMaterialpruefung/Materials Testing
Volume56
Issue number11-12
DOIs
Publication statusPublished - 2014
Externally publishedYes

Fingerprint

Composite materials
Structural panels
Polyester resins
Fibers
Delamination
Epoxy resins
Reinforcement

Keywords

  • Bending
  • Composite
  • Hand lay-up
  • Lamination
  • Materials testing

ASJC Scopus subject areas

  • Mechanical Engineering
  • Mechanics of Materials
  • Materials Science(all)

Cite this

Behavior of chopped strand mat and woven roving under bending. / Arifin, Ahmad Mubarak Tajul; Abdullah, Shahrum; Zulkifli, Rozli; Abd. Wahab, Dzuraidah; Rafiquzzaman, Mohammad.

In: Materialpruefung/Materials Testing, Vol. 56, No. 11-12, 2014, p. 994-1000.

Research output: Contribution to journalArticle

@article{6dfeb3082d84425b83f7b3636665030f,
title = "Behavior of chopped strand mat and woven roving under bending",
abstract = "In this study, lamination panels were fabricated using chopped strand mat (CSM) and woven roving fabric (WR) as reinforcement for two different types of specimens, type Eb and type Pb, respectively. By a combination of plain materials composite lamination structures were formed, with [CSM/0/90/CSM]2s as an orientation layer for the structures. In this research study, the structural panel was produced by hand lay-up technique with a combination of unsaturated epoxy and polyester resin, separately. Therefore, with this publication, a characteristic combination of chopped strand mat/woven roving fabric, are presented. The experimental work for both types of specimens were performed by bending until the structure fails. The characteristics of different materials, i. e. the chemicals used and the composite lamination structure, were studied, because there are different types of damages in the structure of composite materials, such as delamination, matrix cracking, fiber-matrix damage and fiber pull-out. Furthermore, it can affect the behavior of composite materials in the whole structure. As a result, this process contributes to failure prevention, as the capabilities of the structures are known, before it can be used for any part, component or area. It was also shown that different configuration lamination layers influence the strength properties of the composite materials.",
keywords = "Bending, Composite, Hand lay-up, Lamination, Materials testing",
author = "Arifin, {Ahmad Mubarak Tajul} and Shahrum Abdullah and Rozli Zulkifli and {Abd. Wahab}, Dzuraidah and Mohammad Rafiquzzaman",
year = "2014",
doi = "10.3139/120.110662",
language = "English",
volume = "56",
pages = "994--1000",
journal = "Materialpruefung/Materials Testing",
issn = "0025-5300",
publisher = "Carl Hanser Verlag GmbH & Co. KG",
number = "11-12",

}

TY - JOUR

T1 - Behavior of chopped strand mat and woven roving under bending

AU - Arifin, Ahmad Mubarak Tajul

AU - Abdullah, Shahrum

AU - Zulkifli, Rozli

AU - Abd. Wahab, Dzuraidah

AU - Rafiquzzaman, Mohammad

PY - 2014

Y1 - 2014

N2 - In this study, lamination panels were fabricated using chopped strand mat (CSM) and woven roving fabric (WR) as reinforcement for two different types of specimens, type Eb and type Pb, respectively. By a combination of plain materials composite lamination structures were formed, with [CSM/0/90/CSM]2s as an orientation layer for the structures. In this research study, the structural panel was produced by hand lay-up technique with a combination of unsaturated epoxy and polyester resin, separately. Therefore, with this publication, a characteristic combination of chopped strand mat/woven roving fabric, are presented. The experimental work for both types of specimens were performed by bending until the structure fails. The characteristics of different materials, i. e. the chemicals used and the composite lamination structure, were studied, because there are different types of damages in the structure of composite materials, such as delamination, matrix cracking, fiber-matrix damage and fiber pull-out. Furthermore, it can affect the behavior of composite materials in the whole structure. As a result, this process contributes to failure prevention, as the capabilities of the structures are known, before it can be used for any part, component or area. It was also shown that different configuration lamination layers influence the strength properties of the composite materials.

AB - In this study, lamination panels were fabricated using chopped strand mat (CSM) and woven roving fabric (WR) as reinforcement for two different types of specimens, type Eb and type Pb, respectively. By a combination of plain materials composite lamination structures were formed, with [CSM/0/90/CSM]2s as an orientation layer for the structures. In this research study, the structural panel was produced by hand lay-up technique with a combination of unsaturated epoxy and polyester resin, separately. Therefore, with this publication, a characteristic combination of chopped strand mat/woven roving fabric, are presented. The experimental work for both types of specimens were performed by bending until the structure fails. The characteristics of different materials, i. e. the chemicals used and the composite lamination structure, were studied, because there are different types of damages in the structure of composite materials, such as delamination, matrix cracking, fiber-matrix damage and fiber pull-out. Furthermore, it can affect the behavior of composite materials in the whole structure. As a result, this process contributes to failure prevention, as the capabilities of the structures are known, before it can be used for any part, component or area. It was also shown that different configuration lamination layers influence the strength properties of the composite materials.

KW - Bending

KW - Composite

KW - Hand lay-up

KW - Lamination

KW - Materials testing

UR - http://www.scopus.com/inward/record.url?scp=84918818245&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84918818245&partnerID=8YFLogxK

U2 - 10.3139/120.110662

DO - 10.3139/120.110662

M3 - Article

AN - SCOPUS:84918818245

VL - 56

SP - 994

EP - 1000

JO - Materialpruefung/Materials Testing

JF - Materialpruefung/Materials Testing

SN - 0025-5300

IS - 11-12

ER -