Battery management systems (BMS) optimization for electric vehicles (EVs) in Malaysia

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

Following the UN Climate Change Conference 2009 in Copenhagen, Denmark, Malaysia seriously committed on "Go Green" campaign with the aim to reduce 40% GHG emission by the year 2020. Therefore, the National Green Technology Policy has been legalised in 2009 with transportation as one of its focused sectors, which include hybrid (HEVs), electric vehicles (EVs) and fuel cell vehicles with the purpose of to keep up with the worst scenario. While the number of registered cars has been increasing by 1 million yearly, the amount has doubled in the last two decades. Consequently, CO2 emission in Malaysia reaches up to 97.1% and will continue to increase mainly due to the activities in the transportation sector. Nevertheless, Malaysia is now moving towards on green car which battery-based EVs. This type of transportation mainly needs power performance optimization, which is controlled by the Batteries Management System (BMS). BMS is an essential module which leads to reliable power management, optimal power performance and safe vehicle that lead back for power optimization in EVs. Thus, this paper proposes power performance optimization for various setups of lithium-ion cathode with graphene anode using MATLAB/SIMULINK software for better management performance and extended EVs driving range.

Original languageEnglish
Title of host publication7th International Conference on Mechanical and Manufacturing Engineering
Subtitle of host publicationProceedings of the 7th International Conference on Mechanical and Manufacturing Engineering, Sustainable Energy Towards Global Synergy
PublisherAmerican Institute of Physics Inc.
Volume1831
ISBN (Electronic)9780735414990
DOIs
Publication statusPublished - 21 Apr 2017
Event7th International Conference on Mechanical and Manufacturing Engineering, Sustainable Energy Towards Global Synergy, ICME 2016 - Jogjakarta, Indonesia
Duration: 1 Aug 20163 Aug 2016

Other

Other7th International Conference on Mechanical and Manufacturing Engineering, Sustainable Energy Towards Global Synergy, ICME 2016
CountryIndonesia
CityJogjakarta
Period1/8/163/8/16

Fingerprint

Malaysia
management systems
electric batteries
vehicles
optimization
sectors
electric hybrid vehicles
Denmark
climate change
fuel cells
graphene
anodes
lithium
modules
cathodes
computer programs
ions

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Salehen, P. M. W., Su'ait, M. S., Hj Razali, H., & Sopian, K. (2017). Battery management systems (BMS) optimization for electric vehicles (EVs) in Malaysia. In 7th International Conference on Mechanical and Manufacturing Engineering: Proceedings of the 7th International Conference on Mechanical and Manufacturing Engineering, Sustainable Energy Towards Global Synergy (Vol. 1831). [020032] American Institute of Physics Inc.. https://doi.org/10.1063/1.4981173

Battery management systems (BMS) optimization for electric vehicles (EVs) in Malaysia. / Salehen, P. M.W.; Su'ait, Mohd Sukor; Hj Razali, Halim; Sopian, Kamaruzzaman.

7th International Conference on Mechanical and Manufacturing Engineering: Proceedings of the 7th International Conference on Mechanical and Manufacturing Engineering, Sustainable Energy Towards Global Synergy. Vol. 1831 American Institute of Physics Inc., 2017. 020032.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Salehen, PMW, Su'ait, MS, Hj Razali, H & Sopian, K 2017, Battery management systems (BMS) optimization for electric vehicles (EVs) in Malaysia. in 7th International Conference on Mechanical and Manufacturing Engineering: Proceedings of the 7th International Conference on Mechanical and Manufacturing Engineering, Sustainable Energy Towards Global Synergy. vol. 1831, 020032, American Institute of Physics Inc., 7th International Conference on Mechanical and Manufacturing Engineering, Sustainable Energy Towards Global Synergy, ICME 2016, Jogjakarta, Indonesia, 1/8/16. https://doi.org/10.1063/1.4981173
Salehen PMW, Su'ait MS, Hj Razali H, Sopian K. Battery management systems (BMS) optimization for electric vehicles (EVs) in Malaysia. In 7th International Conference on Mechanical and Manufacturing Engineering: Proceedings of the 7th International Conference on Mechanical and Manufacturing Engineering, Sustainable Energy Towards Global Synergy. Vol. 1831. American Institute of Physics Inc. 2017. 020032 https://doi.org/10.1063/1.4981173
Salehen, P. M.W. ; Su'ait, Mohd Sukor ; Hj Razali, Halim ; Sopian, Kamaruzzaman. / Battery management systems (BMS) optimization for electric vehicles (EVs) in Malaysia. 7th International Conference on Mechanical and Manufacturing Engineering: Proceedings of the 7th International Conference on Mechanical and Manufacturing Engineering, Sustainable Energy Towards Global Synergy. Vol. 1831 American Institute of Physics Inc., 2017.
@inproceedings{b8fa6499f6da4709ac6393bf3c0474f1,
title = "Battery management systems (BMS) optimization for electric vehicles (EVs) in Malaysia",
abstract = "Following the UN Climate Change Conference 2009 in Copenhagen, Denmark, Malaysia seriously committed on {"}Go Green{"} campaign with the aim to reduce 40{\%} GHG emission by the year 2020. Therefore, the National Green Technology Policy has been legalised in 2009 with transportation as one of its focused sectors, which include hybrid (HEVs), electric vehicles (EVs) and fuel cell vehicles with the purpose of to keep up with the worst scenario. While the number of registered cars has been increasing by 1 million yearly, the amount has doubled in the last two decades. Consequently, CO2 emission in Malaysia reaches up to 97.1{\%} and will continue to increase mainly due to the activities in the transportation sector. Nevertheless, Malaysia is now moving towards on green car which battery-based EVs. This type of transportation mainly needs power performance optimization, which is controlled by the Batteries Management System (BMS). BMS is an essential module which leads to reliable power management, optimal power performance and safe vehicle that lead back for power optimization in EVs. Thus, this paper proposes power performance optimization for various setups of lithium-ion cathode with graphene anode using MATLAB/SIMULINK software for better management performance and extended EVs driving range.",
author = "Salehen, {P. M.W.} and Su'ait, {Mohd Sukor} and {Hj Razali}, Halim and Kamaruzzaman Sopian",
year = "2017",
month = "4",
day = "21",
doi = "10.1063/1.4981173",
language = "English",
volume = "1831",
booktitle = "7th International Conference on Mechanical and Manufacturing Engineering",
publisher = "American Institute of Physics Inc.",

}

TY - GEN

T1 - Battery management systems (BMS) optimization for electric vehicles (EVs) in Malaysia

AU - Salehen, P. M.W.

AU - Su'ait, Mohd Sukor

AU - Hj Razali, Halim

AU - Sopian, Kamaruzzaman

PY - 2017/4/21

Y1 - 2017/4/21

N2 - Following the UN Climate Change Conference 2009 in Copenhagen, Denmark, Malaysia seriously committed on "Go Green" campaign with the aim to reduce 40% GHG emission by the year 2020. Therefore, the National Green Technology Policy has been legalised in 2009 with transportation as one of its focused sectors, which include hybrid (HEVs), electric vehicles (EVs) and fuel cell vehicles with the purpose of to keep up with the worst scenario. While the number of registered cars has been increasing by 1 million yearly, the amount has doubled in the last two decades. Consequently, CO2 emission in Malaysia reaches up to 97.1% and will continue to increase mainly due to the activities in the transportation sector. Nevertheless, Malaysia is now moving towards on green car which battery-based EVs. This type of transportation mainly needs power performance optimization, which is controlled by the Batteries Management System (BMS). BMS is an essential module which leads to reliable power management, optimal power performance and safe vehicle that lead back for power optimization in EVs. Thus, this paper proposes power performance optimization for various setups of lithium-ion cathode with graphene anode using MATLAB/SIMULINK software for better management performance and extended EVs driving range.

AB - Following the UN Climate Change Conference 2009 in Copenhagen, Denmark, Malaysia seriously committed on "Go Green" campaign with the aim to reduce 40% GHG emission by the year 2020. Therefore, the National Green Technology Policy has been legalised in 2009 with transportation as one of its focused sectors, which include hybrid (HEVs), electric vehicles (EVs) and fuel cell vehicles with the purpose of to keep up with the worst scenario. While the number of registered cars has been increasing by 1 million yearly, the amount has doubled in the last two decades. Consequently, CO2 emission in Malaysia reaches up to 97.1% and will continue to increase mainly due to the activities in the transportation sector. Nevertheless, Malaysia is now moving towards on green car which battery-based EVs. This type of transportation mainly needs power performance optimization, which is controlled by the Batteries Management System (BMS). BMS is an essential module which leads to reliable power management, optimal power performance and safe vehicle that lead back for power optimization in EVs. Thus, this paper proposes power performance optimization for various setups of lithium-ion cathode with graphene anode using MATLAB/SIMULINK software for better management performance and extended EVs driving range.

UR - http://www.scopus.com/inward/record.url?scp=85020219085&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85020219085&partnerID=8YFLogxK

U2 - 10.1063/1.4981173

DO - 10.1063/1.4981173

M3 - Conference contribution

AN - SCOPUS:85020219085

VL - 1831

BT - 7th International Conference on Mechanical and Manufacturing Engineering

PB - American Institute of Physics Inc.

ER -