Analysis of motor speed three phase induction using Harriot and Smith method

Ahmad Faizal, Harman, Rado Yendra, Ahmad Fudholi

Research output: Contribution to journalArticle

Abstract

Induction motor is the driving tool needed by the industry but has the drawback that is difficult speed control for induction motor analysis many experimental methods that can be used to describe the plant that resulted in the control engineer must choose the right model at the time of open loop, hence, need to be analyzed on when close loop with hybrid SMC and PID. Based on the simulation shows the Harriot and Smith method when given the controller does not have a significant difference when reaching the desired setpoint, the Harriot Model has a faster setling time of 2.864 sec and the Smith Model has the ability to overcome the more robust interference that is overshoot in the first area of 0.02%, the second 0.03% and third 0.07% without steady state error. In this case on the control with the Harriot and Smith Models depending on the design of the controller.

Original languageEnglish
Pages (from-to)4971-4975
Number of pages5
JournalJournal of Engineering and Applied Sciences
Volume13
Issue number13
DOIs
Publication statusPublished - 1 Jan 2018

Fingerprint

Induction motors
Controllers
Speed control
Engineers
Industry

Keywords

  • Design
  • Harriot and Smith Models
  • Induction motors
  • PID
  • Rotational speed (RPM)
  • SMC hybrid

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Analysis of motor speed three phase induction using Harriot and Smith method. / Faizal, Ahmad; Harman; Yendra, Rado; Fudholi, Ahmad.

In: Journal of Engineering and Applied Sciences, Vol. 13, No. 13, 01.01.2018, p. 4971-4975.

Research output: Contribution to journalArticle

@article{df0b965065cc416f909dfcee70d7a8b7,
title = "Analysis of motor speed three phase induction using Harriot and Smith method",
abstract = "Induction motor is the driving tool needed by the industry but has the drawback that is difficult speed control for induction motor analysis many experimental methods that can be used to describe the plant that resulted in the control engineer must choose the right model at the time of open loop, hence, need to be analyzed on when close loop with hybrid SMC and PID. Based on the simulation shows the Harriot and Smith method when given the controller does not have a significant difference when reaching the desired setpoint, the Harriot Model has a faster setling time of 2.864 sec and the Smith Model has the ability to overcome the more robust interference that is overshoot in the first area of 0.02{\%}, the second 0.03{\%} and third 0.07{\%} without steady state error. In this case on the control with the Harriot and Smith Models depending on the design of the controller.",
keywords = "Design, Harriot and Smith Models, Induction motors, PID, Rotational speed (RPM), SMC hybrid",
author = "Ahmad Faizal and Harman and Rado Yendra and Ahmad Fudholi",
year = "2018",
month = "1",
day = "1",
doi = "10.3923/jeasci.2018.4971.4975",
language = "English",
volume = "13",
pages = "4971--4975",
journal = "Journal of Engineering and Applied Sciences",
issn = "1816-949X",
publisher = "Medwell Journals",
number = "13",

}

TY - JOUR

T1 - Analysis of motor speed three phase induction using Harriot and Smith method

AU - Faizal, Ahmad

AU - Harman,

AU - Yendra, Rado

AU - Fudholi, Ahmad

PY - 2018/1/1

Y1 - 2018/1/1

N2 - Induction motor is the driving tool needed by the industry but has the drawback that is difficult speed control for induction motor analysis many experimental methods that can be used to describe the plant that resulted in the control engineer must choose the right model at the time of open loop, hence, need to be analyzed on when close loop with hybrid SMC and PID. Based on the simulation shows the Harriot and Smith method when given the controller does not have a significant difference when reaching the desired setpoint, the Harriot Model has a faster setling time of 2.864 sec and the Smith Model has the ability to overcome the more robust interference that is overshoot in the first area of 0.02%, the second 0.03% and third 0.07% without steady state error. In this case on the control with the Harriot and Smith Models depending on the design of the controller.

AB - Induction motor is the driving tool needed by the industry but has the drawback that is difficult speed control for induction motor analysis many experimental methods that can be used to describe the plant that resulted in the control engineer must choose the right model at the time of open loop, hence, need to be analyzed on when close loop with hybrid SMC and PID. Based on the simulation shows the Harriot and Smith method when given the controller does not have a significant difference when reaching the desired setpoint, the Harriot Model has a faster setling time of 2.864 sec and the Smith Model has the ability to overcome the more robust interference that is overshoot in the first area of 0.02%, the second 0.03% and third 0.07% without steady state error. In this case on the control with the Harriot and Smith Models depending on the design of the controller.

KW - Design

KW - Harriot and Smith Models

KW - Induction motors

KW - PID

KW - Rotational speed (RPM)

KW - SMC hybrid

UR - http://www.scopus.com/inward/record.url?scp=85051699994&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85051699994&partnerID=8YFLogxK

U2 - 10.3923/jeasci.2018.4971.4975

DO - 10.3923/jeasci.2018.4971.4975

M3 - Article

AN - SCOPUS:85051699994

VL - 13

SP - 4971

EP - 4975

JO - Journal of Engineering and Applied Sciences

JF - Journal of Engineering and Applied Sciences

SN - 1816-949X

IS - 13

ER -