Analysis of flat and dry polishing parameter influence on surface roughness for robotic polishing cell

Ruzaidi Zamri, N. Ismail, B. T H T Baharudin, A. H M Ariff, Anton Satria Prabuwono

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)

    Abstract

    Polishing is a secondary process in machining. The application of polishing process is crucial to obtained final appearance of a product. This study addresses parameter analysis on flat and dry polishing to determine the most influence parameter which effect surface roughness. For this purpose, Design of Experiment (DOE) is used as a methodology in the analysis. The polishing process is conducted on Comau robotic cell and the combination of grit size, polishing time and polishing force are subjected on the material by using pneumatic polishing tool. Two-level factorial experiment design is conducted and result is interpreted by using statistical software. From the result it is shown that grit size and polishing time give the main effect on surface roughness. However for 2-way interaction effect, polishing time and polishing force contribute significantly on surface roughness. This suggested that for flat and dry polishing, consideration on these parameters is an essential aspect in order to achieve a good surface finished.

    Original languageEnglish
    Title of host publicationApplied Mechanics and Materials
    PublisherTrans Tech Publications Ltd
    Pages543-548
    Number of pages6
    Volume564
    ISBN (Print)9783038351085
    DOIs
    Publication statusPublished - 2014

    Publication series

    NameApplied Mechanics and Materials
    Volume564
    ISSN (Print)16609336
    ISSN (Electronic)16627482

    Fingerprint

    Polishing
    Robotics
    Surface roughness
    Pneumatics
    Design of experiments
    Machining

    Keywords

    • Parameter
    • Polishing
    • Robotic polishing
    • Surface roughness

    ASJC Scopus subject areas

    • Engineering(all)

    Cite this

    Zamri, R., Ismail, N., Baharudin, B. T. H. T., Ariff, A. H. M., & Prabuwono, A. S. (2014). Analysis of flat and dry polishing parameter influence on surface roughness for robotic polishing cell. In Applied Mechanics and Materials (Vol. 564, pp. 543-548). (Applied Mechanics and Materials; Vol. 564). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/AMM.564.543

    Analysis of flat and dry polishing parameter influence on surface roughness for robotic polishing cell. / Zamri, Ruzaidi; Ismail, N.; Baharudin, B. T H T; Ariff, A. H M; Prabuwono, Anton Satria.

    Applied Mechanics and Materials. Vol. 564 Trans Tech Publications Ltd, 2014. p. 543-548 (Applied Mechanics and Materials; Vol. 564).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Zamri, R, Ismail, N, Baharudin, BTHT, Ariff, AHM & Prabuwono, AS 2014, Analysis of flat and dry polishing parameter influence on surface roughness for robotic polishing cell. in Applied Mechanics and Materials. vol. 564, Applied Mechanics and Materials, vol. 564, Trans Tech Publications Ltd, pp. 543-548. https://doi.org/10.4028/www.scientific.net/AMM.564.543
    Zamri R, Ismail N, Baharudin BTHT, Ariff AHM, Prabuwono AS. Analysis of flat and dry polishing parameter influence on surface roughness for robotic polishing cell. In Applied Mechanics and Materials. Vol. 564. Trans Tech Publications Ltd. 2014. p. 543-548. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.564.543
    Zamri, Ruzaidi ; Ismail, N. ; Baharudin, B. T H T ; Ariff, A. H M ; Prabuwono, Anton Satria. / Analysis of flat and dry polishing parameter influence on surface roughness for robotic polishing cell. Applied Mechanics and Materials. Vol. 564 Trans Tech Publications Ltd, 2014. pp. 543-548 (Applied Mechanics and Materials).
    @inproceedings{b85d15483f8e471c9f9d08b580676ffa,
    title = "Analysis of flat and dry polishing parameter influence on surface roughness for robotic polishing cell",
    abstract = "Polishing is a secondary process in machining. The application of polishing process is crucial to obtained final appearance of a product. This study addresses parameter analysis on flat and dry polishing to determine the most influence parameter which effect surface roughness. For this purpose, Design of Experiment (DOE) is used as a methodology in the analysis. The polishing process is conducted on Comau robotic cell and the combination of grit size, polishing time and polishing force are subjected on the material by using pneumatic polishing tool. Two-level factorial experiment design is conducted and result is interpreted by using statistical software. From the result it is shown that grit size and polishing time give the main effect on surface roughness. However for 2-way interaction effect, polishing time and polishing force contribute significantly on surface roughness. This suggested that for flat and dry polishing, consideration on these parameters is an essential aspect in order to achieve a good surface finished.",
    keywords = "Parameter, Polishing, Robotic polishing, Surface roughness",
    author = "Ruzaidi Zamri and N. Ismail and Baharudin, {B. T H T} and Ariff, {A. H M} and Prabuwono, {Anton Satria}",
    year = "2014",
    doi = "10.4028/www.scientific.net/AMM.564.543",
    language = "English",
    isbn = "9783038351085",
    volume = "564",
    series = "Applied Mechanics and Materials",
    publisher = "Trans Tech Publications Ltd",
    pages = "543--548",
    booktitle = "Applied Mechanics and Materials",

    }

    TY - GEN

    T1 - Analysis of flat and dry polishing parameter influence on surface roughness for robotic polishing cell

    AU - Zamri, Ruzaidi

    AU - Ismail, N.

    AU - Baharudin, B. T H T

    AU - Ariff, A. H M

    AU - Prabuwono, Anton Satria

    PY - 2014

    Y1 - 2014

    N2 - Polishing is a secondary process in machining. The application of polishing process is crucial to obtained final appearance of a product. This study addresses parameter analysis on flat and dry polishing to determine the most influence parameter which effect surface roughness. For this purpose, Design of Experiment (DOE) is used as a methodology in the analysis. The polishing process is conducted on Comau robotic cell and the combination of grit size, polishing time and polishing force are subjected on the material by using pneumatic polishing tool. Two-level factorial experiment design is conducted and result is interpreted by using statistical software. From the result it is shown that grit size and polishing time give the main effect on surface roughness. However for 2-way interaction effect, polishing time and polishing force contribute significantly on surface roughness. This suggested that for flat and dry polishing, consideration on these parameters is an essential aspect in order to achieve a good surface finished.

    AB - Polishing is a secondary process in machining. The application of polishing process is crucial to obtained final appearance of a product. This study addresses parameter analysis on flat and dry polishing to determine the most influence parameter which effect surface roughness. For this purpose, Design of Experiment (DOE) is used as a methodology in the analysis. The polishing process is conducted on Comau robotic cell and the combination of grit size, polishing time and polishing force are subjected on the material by using pneumatic polishing tool. Two-level factorial experiment design is conducted and result is interpreted by using statistical software. From the result it is shown that grit size and polishing time give the main effect on surface roughness. However for 2-way interaction effect, polishing time and polishing force contribute significantly on surface roughness. This suggested that for flat and dry polishing, consideration on these parameters is an essential aspect in order to achieve a good surface finished.

    KW - Parameter

    KW - Polishing

    KW - Robotic polishing

    KW - Surface roughness

    UR - http://www.scopus.com/inward/record.url?scp=84903518170&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=84903518170&partnerID=8YFLogxK

    U2 - 10.4028/www.scientific.net/AMM.564.543

    DO - 10.4028/www.scientific.net/AMM.564.543

    M3 - Conference contribution

    SN - 9783038351085

    VL - 564

    T3 - Applied Mechanics and Materials

    SP - 543

    EP - 548

    BT - Applied Mechanics and Materials

    PB - Trans Tech Publications Ltd

    ER -