Analysis of crushing laminated composite square tubes under quasi- static loading

A. Othman, A. A. Arifin, Shahrum Abdullah, Ahmad Kamal Ariffin Mohd Ihsan, N. A N Mohamed

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This paper present on discusses the effect of crashworthiness parameters on pultrusion and hybrid laminated composite square tubes via experimentally. The wall-thicknesses of 2.1 for pultrusion and 1.6 mm aluminum wrap 1 layered were examined at the material fiber type of Eglass reinforced polyester resin of square cross-section subjected to axial quasi-static loading. Comparison has been made for both of type of composite material. During experimental observation, some of crushing modes on stages were identified as initial peak load stage, progressive crushing stage and compaction zone stage. The effects of crushing parameters and failure modes were analyzed and discussed. Results showed that the tube's energy absorption capability was affected significantly by varying of different type of composite in terms of composite fabrication and variable aspect of cross-section. It is also found that different type of fabrication on different manufacturing process of composite reveal in terms of internal energy during crushed events.

Original languageEnglish
Title of host publicationApplied Mechanics and Materials
Pages113-116
Number of pages4
Volume446-447
DOIs
Publication statusPublished - 2014
Event2013 2nd International Conference on Mechanics and Control Engineering, ICMCE 2013 - Beijing
Duration: 1 Sep 20132 Sep 2013

Publication series

NameApplied Mechanics and Materials
Volume446-447
ISSN (Print)16609336
ISSN (Electronic)16627482

Other

Other2013 2nd International Conference on Mechanics and Control Engineering, ICMCE 2013
CityBeijing
Period1/9/132/9/13

Fingerprint

Laminated composites
Crushing
Pultrusion
Composite materials
Fabrication
Crashworthiness
Polyester resins
Energy absorption
Failure modes
Compaction
Aluminum
Fibers

Keywords

  • Absorbed energy
  • Axial loading
  • Quasi-static
  • Square composite tube

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Othman, A., Arifin, A. A., Abdullah, S., Mohd Ihsan, A. K. A., & Mohamed, N. A. N. (2014). Analysis of crushing laminated composite square tubes under quasi- static loading. In Applied Mechanics and Materials (Vol. 446-447, pp. 113-116). (Applied Mechanics and Materials; Vol. 446-447). https://doi.org/10.4028/www.scientific.net/AMM.446-447.113

Analysis of crushing laminated composite square tubes under quasi- static loading. / Othman, A.; Arifin, A. A.; Abdullah, Shahrum; Mohd Ihsan, Ahmad Kamal Ariffin; Mohamed, N. A N.

Applied Mechanics and Materials. Vol. 446-447 2014. p. 113-116 (Applied Mechanics and Materials; Vol. 446-447).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Othman, A, Arifin, AA, Abdullah, S, Mohd Ihsan, AKA & Mohamed, NAN 2014, Analysis of crushing laminated composite square tubes under quasi- static loading. in Applied Mechanics and Materials. vol. 446-447, Applied Mechanics and Materials, vol. 446-447, pp. 113-116, 2013 2nd International Conference on Mechanics and Control Engineering, ICMCE 2013, Beijing, 1/9/13. https://doi.org/10.4028/www.scientific.net/AMM.446-447.113
Othman A, Arifin AA, Abdullah S, Mohd Ihsan AKA, Mohamed NAN. Analysis of crushing laminated composite square tubes under quasi- static loading. In Applied Mechanics and Materials. Vol. 446-447. 2014. p. 113-116. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.446-447.113
Othman, A. ; Arifin, A. A. ; Abdullah, Shahrum ; Mohd Ihsan, Ahmad Kamal Ariffin ; Mohamed, N. A N. / Analysis of crushing laminated composite square tubes under quasi- static loading. Applied Mechanics and Materials. Vol. 446-447 2014. pp. 113-116 (Applied Mechanics and Materials).
@inproceedings{ad39e24625f2495ca938b897ee275bef,
title = "Analysis of crushing laminated composite square tubes under quasi- static loading",
abstract = "This paper present on discusses the effect of crashworthiness parameters on pultrusion and hybrid laminated composite square tubes via experimentally. The wall-thicknesses of 2.1 for pultrusion and 1.6 mm aluminum wrap 1 layered were examined at the material fiber type of Eglass reinforced polyester resin of square cross-section subjected to axial quasi-static loading. Comparison has been made for both of type of composite material. During experimental observation, some of crushing modes on stages were identified as initial peak load stage, progressive crushing stage and compaction zone stage. The effects of crushing parameters and failure modes were analyzed and discussed. Results showed that the tube's energy absorption capability was affected significantly by varying of different type of composite in terms of composite fabrication and variable aspect of cross-section. It is also found that different type of fabrication on different manufacturing process of composite reveal in terms of internal energy during crushed events.",
keywords = "Absorbed energy, Axial loading, Quasi-static, Square composite tube",
author = "A. Othman and Arifin, {A. A.} and Shahrum Abdullah and {Mohd Ihsan}, {Ahmad Kamal Ariffin} and Mohamed, {N. A N}",
year = "2014",
doi = "10.4028/www.scientific.net/AMM.446-447.113",
language = "English",
isbn = "9783037859087",
volume = "446-447",
series = "Applied Mechanics and Materials",
pages = "113--116",
booktitle = "Applied Mechanics and Materials",

}

TY - GEN

T1 - Analysis of crushing laminated composite square tubes under quasi- static loading

AU - Othman, A.

AU - Arifin, A. A.

AU - Abdullah, Shahrum

AU - Mohd Ihsan, Ahmad Kamal Ariffin

AU - Mohamed, N. A N

PY - 2014

Y1 - 2014

N2 - This paper present on discusses the effect of crashworthiness parameters on pultrusion and hybrid laminated composite square tubes via experimentally. The wall-thicknesses of 2.1 for pultrusion and 1.6 mm aluminum wrap 1 layered were examined at the material fiber type of Eglass reinforced polyester resin of square cross-section subjected to axial quasi-static loading. Comparison has been made for both of type of composite material. During experimental observation, some of crushing modes on stages were identified as initial peak load stage, progressive crushing stage and compaction zone stage. The effects of crushing parameters and failure modes were analyzed and discussed. Results showed that the tube's energy absorption capability was affected significantly by varying of different type of composite in terms of composite fabrication and variable aspect of cross-section. It is also found that different type of fabrication on different manufacturing process of composite reveal in terms of internal energy during crushed events.

AB - This paper present on discusses the effect of crashworthiness parameters on pultrusion and hybrid laminated composite square tubes via experimentally. The wall-thicknesses of 2.1 for pultrusion and 1.6 mm aluminum wrap 1 layered were examined at the material fiber type of Eglass reinforced polyester resin of square cross-section subjected to axial quasi-static loading. Comparison has been made for both of type of composite material. During experimental observation, some of crushing modes on stages were identified as initial peak load stage, progressive crushing stage and compaction zone stage. The effects of crushing parameters and failure modes were analyzed and discussed. Results showed that the tube's energy absorption capability was affected significantly by varying of different type of composite in terms of composite fabrication and variable aspect of cross-section. It is also found that different type of fabrication on different manufacturing process of composite reveal in terms of internal energy during crushed events.

KW - Absorbed energy

KW - Axial loading

KW - Quasi-static

KW - Square composite tube

UR - http://www.scopus.com/inward/record.url?scp=84891119366&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84891119366&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.446-447.113

DO - 10.4028/www.scientific.net/AMM.446-447.113

M3 - Conference contribution

AN - SCOPUS:84891119366

SN - 9783037859087

VL - 446-447

T3 - Applied Mechanics and Materials

SP - 113

EP - 116

BT - Applied Mechanics and Materials

ER -