Analysis and simulation of time domain multiplexed (TDM) fiber Bragg sensing array using OptiSystem and OptiGrating

Mohamed M. Elgaud, Mohd Saiful Dzulkefly Zan, A. G. Abushagur, Ahmad Ashrif A Bakar, Ahmed M. Elshirkasi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

In this paper, a combination of two simulation tools provided by Optiwave Systems Inc. was used to perform time division multiplexing TDM based fiber Bragg grating (FBG) sensor for strain measurement application. Four FBG sensors were designed and characterized by OptiGrating and then incorporated into OptiSystem tool to perform the TDM-based simulations. Full ability to utilize the combination to perform TDM-FBG array setup along a 4-km fiber was successfully simulated and analyzed. It was found that the response signal power has linearly decreased with the increase in every 300 μstrain, with the slope of around -0.0027 a.u./μstrain.

Original languageEnglish
Title of host publication2016 International Conference on Advances in Electrical, Electronic and Systems Engineering, ICAEES 2016
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages301-304
Number of pages4
ISBN (Electronic)9781509028894
DOIs
Publication statusPublished - 27 Mar 2017
Event2016 International Conference on Advances in Electrical, Electronic and Systems Engineering, ICAEES 2016 - Putrajaya, Malaysia
Duration: 14 Nov 201616 Nov 2016

Other

Other2016 International Conference on Advances in Electrical, Electronic and Systems Engineering, ICAEES 2016
CountryMalaysia
CityPutrajaya
Period14/11/1616/11/16

Fingerprint

Fiber Bragg gratings
Bragg gratings
fibers
Fibers
Time division multiplexing
simulation
Strain measurement
Sensors
time division multiplexing
strain measurement
sensors
slopes

Keywords

  • FBGs
  • Single pulse transmission
  • Time domain multiplexing fiber Bragg sensor arrays

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Biomedical Engineering
  • Control and Systems Engineering
  • Hardware and Architecture
  • Computer Networks and Communications
  • Instrumentation

Cite this

Elgaud, M. M., Zan, M. S. D., Abushagur, A. G., A Bakar, A. A., & Elshirkasi, A. M. (2017). Analysis and simulation of time domain multiplexed (TDM) fiber Bragg sensing array using OptiSystem and OptiGrating. In 2016 International Conference on Advances in Electrical, Electronic and Systems Engineering, ICAEES 2016 (pp. 301-304). [7888057] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICAEES.2016.7888057

Analysis and simulation of time domain multiplexed (TDM) fiber Bragg sensing array using OptiSystem and OptiGrating. / Elgaud, Mohamed M.; Zan, Mohd Saiful Dzulkefly; Abushagur, A. G.; A Bakar, Ahmad Ashrif; Elshirkasi, Ahmed M.

2016 International Conference on Advances in Electrical, Electronic and Systems Engineering, ICAEES 2016. Institute of Electrical and Electronics Engineers Inc., 2017. p. 301-304 7888057.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Elgaud, MM, Zan, MSD, Abushagur, AG, A Bakar, AA & Elshirkasi, AM 2017, Analysis and simulation of time domain multiplexed (TDM) fiber Bragg sensing array using OptiSystem and OptiGrating. in 2016 International Conference on Advances in Electrical, Electronic and Systems Engineering, ICAEES 2016., 7888057, Institute of Electrical and Electronics Engineers Inc., pp. 301-304, 2016 International Conference on Advances in Electrical, Electronic and Systems Engineering, ICAEES 2016, Putrajaya, Malaysia, 14/11/16. https://doi.org/10.1109/ICAEES.2016.7888057
Elgaud MM, Zan MSD, Abushagur AG, A Bakar AA, Elshirkasi AM. Analysis and simulation of time domain multiplexed (TDM) fiber Bragg sensing array using OptiSystem and OptiGrating. In 2016 International Conference on Advances in Electrical, Electronic and Systems Engineering, ICAEES 2016. Institute of Electrical and Electronics Engineers Inc. 2017. p. 301-304. 7888057 https://doi.org/10.1109/ICAEES.2016.7888057
Elgaud, Mohamed M. ; Zan, Mohd Saiful Dzulkefly ; Abushagur, A. G. ; A Bakar, Ahmad Ashrif ; Elshirkasi, Ahmed M. / Analysis and simulation of time domain multiplexed (TDM) fiber Bragg sensing array using OptiSystem and OptiGrating. 2016 International Conference on Advances in Electrical, Electronic and Systems Engineering, ICAEES 2016. Institute of Electrical and Electronics Engineers Inc., 2017. pp. 301-304
@inproceedings{ccd636b681934ee29ed5f967d13cafa9,
title = "Analysis and simulation of time domain multiplexed (TDM) fiber Bragg sensing array using OptiSystem and OptiGrating",
abstract = "In this paper, a combination of two simulation tools provided by Optiwave Systems Inc. was used to perform time division multiplexing TDM based fiber Bragg grating (FBG) sensor for strain measurement application. Four FBG sensors were designed and characterized by OptiGrating and then incorporated into OptiSystem tool to perform the TDM-based simulations. Full ability to utilize the combination to perform TDM-FBG array setup along a 4-km fiber was successfully simulated and analyzed. It was found that the response signal power has linearly decreased with the increase in every 300 μstrain, with the slope of around -0.0027 a.u./μstrain.",
keywords = "FBGs, Single pulse transmission, Time domain multiplexing fiber Bragg sensor arrays",
author = "Elgaud, {Mohamed M.} and Zan, {Mohd Saiful Dzulkefly} and Abushagur, {A. G.} and {A Bakar}, {Ahmad Ashrif} and Elshirkasi, {Ahmed M.}",
year = "2017",
month = "3",
day = "27",
doi = "10.1109/ICAEES.2016.7888057",
language = "English",
pages = "301--304",
booktitle = "2016 International Conference on Advances in Electrical, Electronic and Systems Engineering, ICAEES 2016",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Analysis and simulation of time domain multiplexed (TDM) fiber Bragg sensing array using OptiSystem and OptiGrating

AU - Elgaud, Mohamed M.

AU - Zan, Mohd Saiful Dzulkefly

AU - Abushagur, A. G.

AU - A Bakar, Ahmad Ashrif

AU - Elshirkasi, Ahmed M.

PY - 2017/3/27

Y1 - 2017/3/27

N2 - In this paper, a combination of two simulation tools provided by Optiwave Systems Inc. was used to perform time division multiplexing TDM based fiber Bragg grating (FBG) sensor for strain measurement application. Four FBG sensors were designed and characterized by OptiGrating and then incorporated into OptiSystem tool to perform the TDM-based simulations. Full ability to utilize the combination to perform TDM-FBG array setup along a 4-km fiber was successfully simulated and analyzed. It was found that the response signal power has linearly decreased with the increase in every 300 μstrain, with the slope of around -0.0027 a.u./μstrain.

AB - In this paper, a combination of two simulation tools provided by Optiwave Systems Inc. was used to perform time division multiplexing TDM based fiber Bragg grating (FBG) sensor for strain measurement application. Four FBG sensors were designed and characterized by OptiGrating and then incorporated into OptiSystem tool to perform the TDM-based simulations. Full ability to utilize the combination to perform TDM-FBG array setup along a 4-km fiber was successfully simulated and analyzed. It was found that the response signal power has linearly decreased with the increase in every 300 μstrain, with the slope of around -0.0027 a.u./μstrain.

KW - FBGs

KW - Single pulse transmission

KW - Time domain multiplexing fiber Bragg sensor arrays

UR - http://www.scopus.com/inward/record.url?scp=85018191520&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85018191520&partnerID=8YFLogxK

U2 - 10.1109/ICAEES.2016.7888057

DO - 10.1109/ICAEES.2016.7888057

M3 - Conference contribution

AN - SCOPUS:85018191520

SP - 301

EP - 304

BT - 2016 International Conference on Advances in Electrical, Electronic and Systems Engineering, ICAEES 2016

PB - Institute of Electrical and Electronics Engineers Inc.

ER -