Analysis and modeling of delamination factor in drilling of woven kenaf fiber reinforced epoxy using Box Behnken experimental design

M. Suhaily, Che Hassan Che Haron, Jaharah A Ghani, M. A. Afifah, M. K. Nor Khairusshima

Research output: Contribution to journalConference article

Abstract

In this research study, it presents a comprehensive mathematical model for correlating the influences of drilling parameters on the delamination factor during the drilling of woven kenaf fiber reinforced epoxy composite laminates using the Box Behnken experimental design. The purpose of this study is to investigate the influence of drilling parameters such as cutting speed, feed rate and drill sizes on the delamination produced when drilling woven kenaf reinforced epoxy composite using the non-coated HSS drill bits. The damage generated on the woven kenaf reinforced epoxy composite laminates were observed both at the entrance and exit surface during the drilling operation. The experiments were conducted according to the Box Behnken experimental designs.

Original languageEnglish
Article number012033
JournalIOP Conference Series: Materials Science and Engineering
Volume290
Issue number1
DOIs
Publication statusPublished - 30 Jan 2018

Fingerprint

Kenaf fibers
Delamination
Design of experiments
Drilling
Laminates
Composite materials
Mathematical models
Experiments

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Cite this

Analysis and modeling of delamination factor in drilling of woven kenaf fiber reinforced epoxy using Box Behnken experimental design. / Suhaily, M.; Che Haron, Che Hassan; A Ghani, Jaharah; Afifah, M. A.; Nor Khairusshima, M. K.

In: IOP Conference Series: Materials Science and Engineering, Vol. 290, No. 1, 012033, 30.01.2018.

Research output: Contribution to journalConference article

@article{11543a17f15046d4b7f68ca57b512b85,
title = "Analysis and modeling of delamination factor in drilling of woven kenaf fiber reinforced epoxy using Box Behnken experimental design",
abstract = "In this research study, it presents a comprehensive mathematical model for correlating the influences of drilling parameters on the delamination factor during the drilling of woven kenaf fiber reinforced epoxy composite laminates using the Box Behnken experimental design. The purpose of this study is to investigate the influence of drilling parameters such as cutting speed, feed rate and drill sizes on the delamination produced when drilling woven kenaf reinforced epoxy composite using the non-coated HSS drill bits. The damage generated on the woven kenaf reinforced epoxy composite laminates were observed both at the entrance and exit surface during the drilling operation. The experiments were conducted according to the Box Behnken experimental designs.",
author = "M. Suhaily and {Che Haron}, {Che Hassan} and {A Ghani}, Jaharah and Afifah, {M. A.} and {Nor Khairusshima}, {M. K.}",
year = "2018",
month = "1",
day = "30",
doi = "10.1088/1757-899X/290/1/012033",
language = "English",
volume = "290",
journal = "IOP Conference Series: Materials Science and Engineering",
issn = "1757-8981",
publisher = "IOP Publishing Ltd.",
number = "1",

}

TY - JOUR

T1 - Analysis and modeling of delamination factor in drilling of woven kenaf fiber reinforced epoxy using Box Behnken experimental design

AU - Suhaily, M.

AU - Che Haron, Che Hassan

AU - A Ghani, Jaharah

AU - Afifah, M. A.

AU - Nor Khairusshima, M. K.

PY - 2018/1/30

Y1 - 2018/1/30

N2 - In this research study, it presents a comprehensive mathematical model for correlating the influences of drilling parameters on the delamination factor during the drilling of woven kenaf fiber reinforced epoxy composite laminates using the Box Behnken experimental design. The purpose of this study is to investigate the influence of drilling parameters such as cutting speed, feed rate and drill sizes on the delamination produced when drilling woven kenaf reinforced epoxy composite using the non-coated HSS drill bits. The damage generated on the woven kenaf reinforced epoxy composite laminates were observed both at the entrance and exit surface during the drilling operation. The experiments were conducted according to the Box Behnken experimental designs.

AB - In this research study, it presents a comprehensive mathematical model for correlating the influences of drilling parameters on the delamination factor during the drilling of woven kenaf fiber reinforced epoxy composite laminates using the Box Behnken experimental design. The purpose of this study is to investigate the influence of drilling parameters such as cutting speed, feed rate and drill sizes on the delamination produced when drilling woven kenaf reinforced epoxy composite using the non-coated HSS drill bits. The damage generated on the woven kenaf reinforced epoxy composite laminates were observed both at the entrance and exit surface during the drilling operation. The experiments were conducted according to the Box Behnken experimental designs.

UR - http://www.scopus.com/inward/record.url?scp=85042252915&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85042252915&partnerID=8YFLogxK

U2 - 10.1088/1757-899X/290/1/012033

DO - 10.1088/1757-899X/290/1/012033

M3 - Conference article

VL - 290

JO - IOP Conference Series: Materials Science and Engineering

JF - IOP Conference Series: Materials Science and Engineering

SN - 1757-8981

IS - 1

M1 - 012033

ER -