A study of PC-based ultrasonic goniometer system of surface properties and characterization of materials

S. Sani, Mohamad Hanif Md Saad, Nordin Jamaludin, M. P. Ismail, S. Mohd, I. Mustapha, N. A. Masenwat, T. S. Tengku Amran, M. H.A. Megat Ahmad

Research output: Contribution to journalConference article

Abstract

This paper discussed the design and development of a portable PC-based ultrasonic goniometer system that can be used to study material properties using ultrasonic wave. The system utilizes an ultrasonic pulse-receiver card model attached to computer notebook for signal display. A new specific software package (GoNIO) was developed to control the operation of the scanner, displaying the data and analyze characteristics of materials. System testing was carried out using samples with cubic dimension of about 10 mm x 20 mm x 30 mm. This size allows the sample to be fitted into the goniometer specimen holder and immersed in a liquid during measurement. The sample was rotated from incident angle of 0° to 90° during measurement and the amplitude reflected signals were recorded at every one degree of rotation. Immersion transducers were used to generate and receive the ultrasounds that pass through the samples. Longitudinal, shear and Rayleigh wave measurements were performed on the samples to determine the Dynamic Young's Modulus. Results of measurements are explained and discussed.

Original languageEnglish
Article number012044
JournalIOP Conference Series: Materials Science and Engineering
Volume298
Issue number1
DOIs
Publication statusPublished - 12 Feb 2018
EventInternational Nuclear Science, Technology and Engineering Conference 2017, iNuSTEC 2017 - Kajang, Selangor, Malaysia
Duration: 25 Sep 201727 Sep 2017

Fingerprint

Goniometers
Surface properties
Ultrasonics
Laptop computers
Rayleigh waves
Shear waves
Ultrasonic waves
Software packages
Transducers
Materials properties
Elastic moduli
Display devices
Liquids
Testing

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Cite this

A study of PC-based ultrasonic goniometer system of surface properties and characterization of materials. / Sani, S.; Md Saad, Mohamad Hanif; Jamaludin, Nordin; Ismail, M. P.; Mohd, S.; Mustapha, I.; Masenwat, N. A.; Tengku Amran, T. S.; Megat Ahmad, M. H.A.

In: IOP Conference Series: Materials Science and Engineering, Vol. 298, No. 1, 012044, 12.02.2018.

Research output: Contribution to journalConference article

Sani, S. ; Md Saad, Mohamad Hanif ; Jamaludin, Nordin ; Ismail, M. P. ; Mohd, S. ; Mustapha, I. ; Masenwat, N. A. ; Tengku Amran, T. S. ; Megat Ahmad, M. H.A. / A study of PC-based ultrasonic goniometer system of surface properties and characterization of materials. In: IOP Conference Series: Materials Science and Engineering. 2018 ; Vol. 298, No. 1.
@article{c93ca122b1e14f469304b30c9c1e9421,
title = "A study of PC-based ultrasonic goniometer system of surface properties and characterization of materials",
abstract = "This paper discussed the design and development of a portable PC-based ultrasonic goniometer system that can be used to study material properties using ultrasonic wave. The system utilizes an ultrasonic pulse-receiver card model attached to computer notebook for signal display. A new specific software package (GoNIO) was developed to control the operation of the scanner, displaying the data and analyze characteristics of materials. System testing was carried out using samples with cubic dimension of about 10 mm x 20 mm x 30 mm. This size allows the sample to be fitted into the goniometer specimen holder and immersed in a liquid during measurement. The sample was rotated from incident angle of 0° to 90° during measurement and the amplitude reflected signals were recorded at every one degree of rotation. Immersion transducers were used to generate and receive the ultrasounds that pass through the samples. Longitudinal, shear and Rayleigh wave measurements were performed on the samples to determine the Dynamic Young's Modulus. Results of measurements are explained and discussed.",
author = "S. Sani and {Md Saad}, {Mohamad Hanif} and Nordin Jamaludin and Ismail, {M. P.} and S. Mohd and I. Mustapha and Masenwat, {N. A.} and {Tengku Amran}, {T. S.} and {Megat Ahmad}, {M. H.A.}",
year = "2018",
month = "2",
day = "12",
doi = "10.1088/1757-899X/298/1/012044",
language = "English",
volume = "298",
journal = "IOP Conference Series: Materials Science and Engineering",
issn = "1757-8981",
publisher = "IOP Publishing Ltd.",
number = "1",

}

TY - JOUR

T1 - A study of PC-based ultrasonic goniometer system of surface properties and characterization of materials

AU - Sani, S.

AU - Md Saad, Mohamad Hanif

AU - Jamaludin, Nordin

AU - Ismail, M. P.

AU - Mohd, S.

AU - Mustapha, I.

AU - Masenwat, N. A.

AU - Tengku Amran, T. S.

AU - Megat Ahmad, M. H.A.

PY - 2018/2/12

Y1 - 2018/2/12

N2 - This paper discussed the design and development of a portable PC-based ultrasonic goniometer system that can be used to study material properties using ultrasonic wave. The system utilizes an ultrasonic pulse-receiver card model attached to computer notebook for signal display. A new specific software package (GoNIO) was developed to control the operation of the scanner, displaying the data and analyze characteristics of materials. System testing was carried out using samples with cubic dimension of about 10 mm x 20 mm x 30 mm. This size allows the sample to be fitted into the goniometer specimen holder and immersed in a liquid during measurement. The sample was rotated from incident angle of 0° to 90° during measurement and the amplitude reflected signals were recorded at every one degree of rotation. Immersion transducers were used to generate and receive the ultrasounds that pass through the samples. Longitudinal, shear and Rayleigh wave measurements were performed on the samples to determine the Dynamic Young's Modulus. Results of measurements are explained and discussed.

AB - This paper discussed the design and development of a portable PC-based ultrasonic goniometer system that can be used to study material properties using ultrasonic wave. The system utilizes an ultrasonic pulse-receiver card model attached to computer notebook for signal display. A new specific software package (GoNIO) was developed to control the operation of the scanner, displaying the data and analyze characteristics of materials. System testing was carried out using samples with cubic dimension of about 10 mm x 20 mm x 30 mm. This size allows the sample to be fitted into the goniometer specimen holder and immersed in a liquid during measurement. The sample was rotated from incident angle of 0° to 90° during measurement and the amplitude reflected signals were recorded at every one degree of rotation. Immersion transducers were used to generate and receive the ultrasounds that pass through the samples. Longitudinal, shear and Rayleigh wave measurements were performed on the samples to determine the Dynamic Young's Modulus. Results of measurements are explained and discussed.

UR - http://www.scopus.com/inward/record.url?scp=85043986826&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85043986826&partnerID=8YFLogxK

U2 - 10.1088/1757-899X/298/1/012044

DO - 10.1088/1757-899X/298/1/012044

M3 - Conference article

AN - SCOPUS:85043986826

VL - 298

JO - IOP Conference Series: Materials Science and Engineering

JF - IOP Conference Series: Materials Science and Engineering

SN - 1757-8981

IS - 1

M1 - 012044

ER -