A study of engine monitoring system using statistical method

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Various condition monitoring techniques were applied during a laboratory engine test in order to understand the wear processes occurring and to determine a suitable method which could be applicable to the detection and diagnosis of abnormal engine condition in practice. The goal of the research presented in this study is to monitor the internal combustion engine block. The proposed engine block approach is based on measuring and monitoring the engine operation in variable speed and torque using Piezoelectric Sensor. However, it normally requires analyzing the obtained signal for providing valuable information. This research involves two main procedures including data collecting as well as data analyzing. Data collecting is processes of sensor attach, run the engine and record the data while data analyzing is translating the data using data acquisition and filtering by fast furrier transform and analyzing by I-kaz and MZN methods.

Original languageEnglish
Title of host publicationApplied Mechanics and Materials
Pages193-196
Number of pages4
Volume471
DOIs
Publication statusPublished - 2014
Event4th International Conference on Noise, Vibration and Comfort, NVC 2012 - Kuala Lumpur
Duration: 26 Nov 201228 Nov 2012

Publication series

NameApplied Mechanics and Materials
Volume471
ISSN (Print)16609336
ISSN (Electronic)16627482

Other

Other4th International Conference on Noise, Vibration and Comfort, NVC 2012
CityKuala Lumpur
Period26/11/1228/11/12

Fingerprint

Statistical methods
Engines
Monitoring
Sensors
Condition monitoring
Internal combustion engines
Data acquisition
Torque
Wear of materials

Keywords

  • Condition monitoring
  • Engine
  • I-kaz
  • MZN methods

ASJC Scopus subject areas

  • Engineering(all)

Cite this

A study of engine monitoring system using statistical method. / Nuawi, Mohd. Zaki; Khamis, Nor Kamaliana; Zali, Z.; Wan Mahmood, Wan Mohd Faizal; Abdullah, Shahrum; Mohd Nopiah, Zulkifli.

Applied Mechanics and Materials. Vol. 471 2014. p. 193-196 (Applied Mechanics and Materials; Vol. 471).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nuawi, MZ, Khamis, NK, Zali, Z, Wan Mahmood, WMF, Abdullah, S & Mohd Nopiah, Z 2014, A study of engine monitoring system using statistical method. in Applied Mechanics and Materials. vol. 471, Applied Mechanics and Materials, vol. 471, pp. 193-196, 4th International Conference on Noise, Vibration and Comfort, NVC 2012, Kuala Lumpur, 26/11/12. https://doi.org/10.4028/www.scientific.net/AMM.471.193
@inproceedings{bb75309ccaf0422686a4e0ddf56f7721,
title = "A study of engine monitoring system using statistical method",
abstract = "Various condition monitoring techniques were applied during a laboratory engine test in order to understand the wear processes occurring and to determine a suitable method which could be applicable to the detection and diagnosis of abnormal engine condition in practice. The goal of the research presented in this study is to monitor the internal combustion engine block. The proposed engine block approach is based on measuring and monitoring the engine operation in variable speed and torque using Piezoelectric Sensor. However, it normally requires analyzing the obtained signal for providing valuable information. This research involves two main procedures including data collecting as well as data analyzing. Data collecting is processes of sensor attach, run the engine and record the data while data analyzing is translating the data using data acquisition and filtering by fast furrier transform and analyzing by I-kaz and MZN methods.",
keywords = "Condition monitoring, Engine, I-kaz, MZN methods",
author = "Nuawi, {Mohd. Zaki} and Khamis, {Nor Kamaliana} and Z. Zali and {Wan Mahmood}, {Wan Mohd Faizal} and Shahrum Abdullah and {Mohd Nopiah}, Zulkifli",
year = "2014",
doi = "10.4028/www.scientific.net/AMM.471.193",
language = "English",
isbn = "9783037859308",
volume = "471",
series = "Applied Mechanics and Materials",
pages = "193--196",
booktitle = "Applied Mechanics and Materials",

}

TY - GEN

T1 - A study of engine monitoring system using statistical method

AU - Nuawi, Mohd. Zaki

AU - Khamis, Nor Kamaliana

AU - Zali, Z.

AU - Wan Mahmood, Wan Mohd Faizal

AU - Abdullah, Shahrum

AU - Mohd Nopiah, Zulkifli

PY - 2014

Y1 - 2014

N2 - Various condition monitoring techniques were applied during a laboratory engine test in order to understand the wear processes occurring and to determine a suitable method which could be applicable to the detection and diagnosis of abnormal engine condition in practice. The goal of the research presented in this study is to monitor the internal combustion engine block. The proposed engine block approach is based on measuring and monitoring the engine operation in variable speed and torque using Piezoelectric Sensor. However, it normally requires analyzing the obtained signal for providing valuable information. This research involves two main procedures including data collecting as well as data analyzing. Data collecting is processes of sensor attach, run the engine and record the data while data analyzing is translating the data using data acquisition and filtering by fast furrier transform and analyzing by I-kaz and MZN methods.

AB - Various condition monitoring techniques were applied during a laboratory engine test in order to understand the wear processes occurring and to determine a suitable method which could be applicable to the detection and diagnosis of abnormal engine condition in practice. The goal of the research presented in this study is to monitor the internal combustion engine block. The proposed engine block approach is based on measuring and monitoring the engine operation in variable speed and torque using Piezoelectric Sensor. However, it normally requires analyzing the obtained signal for providing valuable information. This research involves two main procedures including data collecting as well as data analyzing. Data collecting is processes of sensor attach, run the engine and record the data while data analyzing is translating the data using data acquisition and filtering by fast furrier transform and analyzing by I-kaz and MZN methods.

KW - Condition monitoring

KW - Engine

KW - I-kaz

KW - MZN methods

UR - http://www.scopus.com/inward/record.url?scp=84891511176&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84891511176&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.471.193

DO - 10.4028/www.scientific.net/AMM.471.193

M3 - Conference contribution

AN - SCOPUS:84891511176

SN - 9783037859308

VL - 471

T3 - Applied Mechanics and Materials

SP - 193

EP - 196

BT - Applied Mechanics and Materials

ER -