A practical investigation on nickel plated copper heat spreader with different catalytic activation processes for flip-chip ball grid array packages

Nowshad Amin, Victor Lim, Foong Chee Seng, Rozaidi Razid, Ibrahim Ahmad

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

This study investigates the effects of two different catalytic activation techniques on the thermal performance of the flip-chip heat spreaders. The two activation techniques studied are thin nickel-copper strike and galvanic initiation. Thermal diffusivity and surface roughness of these heat spreaders were studied using the Nano-flash Apparatus and Infinite Focus Microscopy. High temperature storage tests were carried out to investigate the extent of intermetallic diffusion between the nickel and copper layers. The results show that heat spreaders with thin nickel-copper strike catalytic activation technique have a lower thermal diffusivity due to the low thermal conductivity of nickel-copper layer. Moreover, the nickel-copper layers grew thicker from around 0.2 μm at initial time to around 0.55 μm after high temperature storage duration of 168 h. On the other hand, heat spreaders processed using the galvanic initiation technique did not form any nickel-copper intermetallic diffusion layer. As a conclusion, the galvanic initiation technique can potentially provide better thermal performance for heat spreaders used in semiconductor packages.

Original languageEnglish
Pages (from-to)537-543
Number of pages7
JournalMicroelectronics Reliability
Volume49
Issue number5
DOIs
Publication statusPublished - May 2009

Fingerprint

Spreaders
Ball grid arrays
Nickel
balls
Copper
Chemical activation
chips
grids
nickel
activation
copper
heat
thermal diffusivity
Thermal diffusivity
intermetallics
Intermetallics
flash
Hot Temperature
surface roughness
roughness

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Electronic, Optical and Magnetic Materials
  • Surfaces, Coatings and Films
  • Atomic and Molecular Physics, and Optics
  • Condensed Matter Physics
  • Safety, Risk, Reliability and Quality

Cite this

A practical investigation on nickel plated copper heat spreader with different catalytic activation processes for flip-chip ball grid array packages. / Amin, Nowshad; Lim, Victor; Seng, Foong Chee; Razid, Rozaidi; Ahmad, Ibrahim.

In: Microelectronics Reliability, Vol. 49, No. 5, 05.2009, p. 537-543.

Research output: Contribution to journalArticle

@article{9b04271d1cbf4afcb172910bbb1ba3ed,
title = "A practical investigation on nickel plated copper heat spreader with different catalytic activation processes for flip-chip ball grid array packages",
abstract = "This study investigates the effects of two different catalytic activation techniques on the thermal performance of the flip-chip heat spreaders. The two activation techniques studied are thin nickel-copper strike and galvanic initiation. Thermal diffusivity and surface roughness of these heat spreaders were studied using the Nano-flash Apparatus and Infinite Focus Microscopy. High temperature storage tests were carried out to investigate the extent of intermetallic diffusion between the nickel and copper layers. The results show that heat spreaders with thin nickel-copper strike catalytic activation technique have a lower thermal diffusivity due to the low thermal conductivity of nickel-copper layer. Moreover, the nickel-copper layers grew thicker from around 0.2 μm at initial time to around 0.55 μm after high temperature storage duration of 168 h. On the other hand, heat spreaders processed using the galvanic initiation technique did not form any nickel-copper intermetallic diffusion layer. As a conclusion, the galvanic initiation technique can potentially provide better thermal performance for heat spreaders used in semiconductor packages.",
author = "Nowshad Amin and Victor Lim and Seng, {Foong Chee} and Rozaidi Razid and Ibrahim Ahmad",
year = "2009",
month = "5",
doi = "10.1016/j.microrel.2009.02.013",
language = "English",
volume = "49",
pages = "537--543",
journal = "Microelectronics and Reliability",
issn = "0026-2714",
publisher = "Elsevier Limited",
number = "5",

}

TY - JOUR

T1 - A practical investigation on nickel plated copper heat spreader with different catalytic activation processes for flip-chip ball grid array packages

AU - Amin, Nowshad

AU - Lim, Victor

AU - Seng, Foong Chee

AU - Razid, Rozaidi

AU - Ahmad, Ibrahim

PY - 2009/5

Y1 - 2009/5

N2 - This study investigates the effects of two different catalytic activation techniques on the thermal performance of the flip-chip heat spreaders. The two activation techniques studied are thin nickel-copper strike and galvanic initiation. Thermal diffusivity and surface roughness of these heat spreaders were studied using the Nano-flash Apparatus and Infinite Focus Microscopy. High temperature storage tests were carried out to investigate the extent of intermetallic diffusion between the nickel and copper layers. The results show that heat spreaders with thin nickel-copper strike catalytic activation technique have a lower thermal diffusivity due to the low thermal conductivity of nickel-copper layer. Moreover, the nickel-copper layers grew thicker from around 0.2 μm at initial time to around 0.55 μm after high temperature storage duration of 168 h. On the other hand, heat spreaders processed using the galvanic initiation technique did not form any nickel-copper intermetallic diffusion layer. As a conclusion, the galvanic initiation technique can potentially provide better thermal performance for heat spreaders used in semiconductor packages.

AB - This study investigates the effects of two different catalytic activation techniques on the thermal performance of the flip-chip heat spreaders. The two activation techniques studied are thin nickel-copper strike and galvanic initiation. Thermal diffusivity and surface roughness of these heat spreaders were studied using the Nano-flash Apparatus and Infinite Focus Microscopy. High temperature storage tests were carried out to investigate the extent of intermetallic diffusion between the nickel and copper layers. The results show that heat spreaders with thin nickel-copper strike catalytic activation technique have a lower thermal diffusivity due to the low thermal conductivity of nickel-copper layer. Moreover, the nickel-copper layers grew thicker from around 0.2 μm at initial time to around 0.55 μm after high temperature storage duration of 168 h. On the other hand, heat spreaders processed using the galvanic initiation technique did not form any nickel-copper intermetallic diffusion layer. As a conclusion, the galvanic initiation technique can potentially provide better thermal performance for heat spreaders used in semiconductor packages.

UR - http://www.scopus.com/inward/record.url?scp=67349100528&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=67349100528&partnerID=8YFLogxK

U2 - 10.1016/j.microrel.2009.02.013

DO - 10.1016/j.microrel.2009.02.013

M3 - Article

VL - 49

SP - 537

EP - 543

JO - Microelectronics and Reliability

JF - Microelectronics and Reliability

SN - 0026-2714

IS - 5

ER -