PI regulator dq struje velike brzine za pogon PMSM

Translated title of the contribution: A high speed current dq PI controller for PMSM drive

Mohammad Marufuzzaman, Md. Mamun Ibne Reaz, Labonnah Farzana Rahman, Tae Gyu Chang

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

A Field Programmable Gate Array (FPGA) based solution of current dq PI controller is proposed in this research, which is usually implemented in digital signal processor (DSP) based computer. The main problem in DSP based solution is the execution time, which is usually in microseconds range as well as reaching its physical limits. Therefore, completing the execution within nanoseconds becomes a major challenge to all researchers, which can be done by reducing the clock cycles. Implementing the overall controlling algorithm into FPGA will certainly reduce the execution time dramatically to pledge the steadiness of the motor. The result shows that the proposed FPGA performance requires only 68 ns of execution time for operating frequency of 30 MHz and accuracy of 99,9%, which is the lowest computational cycle for the era.

Original languageUndefined/Unknown
Pages (from-to)467-470
Number of pages4
JournalTehnicki Vjesnik
Volume21
Issue number3
Publication statusPublished - 2014

Fingerprint

Field programmable gate arrays (FPGA)
Digital signal processors
Controllers
Clocks

Keywords

  • Current dq
  • FOC PMSM (field oriented control of permanent magnet synchronous motor)
  • FPGA (field programmable gate array)
  • PI controller

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Marufuzzaman, M., Ibne Reaz, M. M., Rahman, L. F., & Chang, T. G. (2014). PI regulator dq struje velike brzine za pogon PMSM. Tehnicki Vjesnik, 21(3), 467-470.

PI regulator dq struje velike brzine za pogon PMSM. / Marufuzzaman, Mohammad; Ibne Reaz, Md. Mamun; Rahman, Labonnah Farzana; Chang, Tae Gyu.

In: Tehnicki Vjesnik, Vol. 21, No. 3, 2014, p. 467-470.

Research output: Contribution to journalArticle

Marufuzzaman, M, Ibne Reaz, MM, Rahman, LF & Chang, TG 2014, 'PI regulator dq struje velike brzine za pogon PMSM', Tehnicki Vjesnik, vol. 21, no. 3, pp. 467-470.
Marufuzzaman M, Ibne Reaz MM, Rahman LF, Chang TG. PI regulator dq struje velike brzine za pogon PMSM. Tehnicki Vjesnik. 2014;21(3):467-470.
Marufuzzaman, Mohammad ; Ibne Reaz, Md. Mamun ; Rahman, Labonnah Farzana ; Chang, Tae Gyu. / PI regulator dq struje velike brzine za pogon PMSM. In: Tehnicki Vjesnik. 2014 ; Vol. 21, No. 3. pp. 467-470.
@article{036840832121473ebb8759f6dfac072a,
title = "PI regulator dq struje velike brzine za pogon PMSM",
abstract = "A Field Programmable Gate Array (FPGA) based solution of current dq PI controller is proposed in this research, which is usually implemented in digital signal processor (DSP) based computer. The main problem in DSP based solution is the execution time, which is usually in microseconds range as well as reaching its physical limits. Therefore, completing the execution within nanoseconds becomes a major challenge to all researchers, which can be done by reducing the clock cycles. Implementing the overall controlling algorithm into FPGA will certainly reduce the execution time dramatically to pledge the steadiness of the motor. The result shows that the proposed FPGA performance requires only 68 ns of execution time for operating frequency of 30 MHz and accuracy of 99,9{\%}, which is the lowest computational cycle for the era.",
keywords = "Current dq, FOC PMSM (field oriented control of permanent magnet synchronous motor), FPGA (field programmable gate array), PI controller",
author = "Mohammad Marufuzzaman and {Ibne Reaz}, {Md. Mamun} and Rahman, {Labonnah Farzana} and Chang, {Tae Gyu}",
year = "2014",
language = "Undefined/Unknown",
volume = "21",
pages = "467--470",
journal = "Tehnicki Vjesnik",
issn = "1330-3651",
publisher = "Strojarski Facultet, Sveuciliste Josipa Jurja Strossmayera u Osijeki",
number = "3",

}

TY - JOUR

T1 - PI regulator dq struje velike brzine za pogon PMSM

AU - Marufuzzaman, Mohammad

AU - Ibne Reaz, Md. Mamun

AU - Rahman, Labonnah Farzana

AU - Chang, Tae Gyu

PY - 2014

Y1 - 2014

N2 - A Field Programmable Gate Array (FPGA) based solution of current dq PI controller is proposed in this research, which is usually implemented in digital signal processor (DSP) based computer. The main problem in DSP based solution is the execution time, which is usually in microseconds range as well as reaching its physical limits. Therefore, completing the execution within nanoseconds becomes a major challenge to all researchers, which can be done by reducing the clock cycles. Implementing the overall controlling algorithm into FPGA will certainly reduce the execution time dramatically to pledge the steadiness of the motor. The result shows that the proposed FPGA performance requires only 68 ns of execution time for operating frequency of 30 MHz and accuracy of 99,9%, which is the lowest computational cycle for the era.

AB - A Field Programmable Gate Array (FPGA) based solution of current dq PI controller is proposed in this research, which is usually implemented in digital signal processor (DSP) based computer. The main problem in DSP based solution is the execution time, which is usually in microseconds range as well as reaching its physical limits. Therefore, completing the execution within nanoseconds becomes a major challenge to all researchers, which can be done by reducing the clock cycles. Implementing the overall controlling algorithm into FPGA will certainly reduce the execution time dramatically to pledge the steadiness of the motor. The result shows that the proposed FPGA performance requires only 68 ns of execution time for operating frequency of 30 MHz and accuracy of 99,9%, which is the lowest computational cycle for the era.

KW - Current dq

KW - FOC PMSM (field oriented control of permanent magnet synchronous motor)

KW - FPGA (field programmable gate array)

KW - PI controller

UR - http://www.scopus.com/inward/record.url?scp=84903219176&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84903219176&partnerID=8YFLogxK

M3 - Article

VL - 21

SP - 467

EP - 470

JO - Tehnicki Vjesnik

JF - Tehnicki Vjesnik

SN - 1330-3651

IS - 3

ER -