A comparative study of computer aided system preoperative planning for high tibial osteotomy

Norazimah Awang, Riza Sulaiman, Azrulhizam Shapi`i, Abdul Halim Abd Rashid, Mohd Fahmi Mohamad Amran, Salyani Osman

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

We discuss five softwares commonly used for preoperative planning for high tibial osteotomy, namely MedWeb, TraumaCad, MediCad, Sectra and Photoshop. Each software has their own specialty and specification based on surgeon requirements. Detail of methods for each software is discussed. This paper aims to highlights the strength and weaknesses of the softwares. Our comparison shows that the selection of method to be used depends on the needs of the surgeon. The different software suitability discussed are axis used, users’ control capability, automatic wedge selection, CORA’s point, tibial slope, automatic measurement, and visualize correction. The results obtained from the comparative analysis are expected to aid in development innovative software for preoperative osteotomy planning, based on the strengths of each software discussed.

Original languageEnglish
Title of host publicationLecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
PublisherSpringer Verlag
Pages189-198
Number of pages10
Volume9429
ISBN (Print)9783319259383, 9783319259383
DOIs
Publication statusPublished - 2015
Event4th International Visual Informatics Conference, IVIC 2015 - Bangi, Malaysia
Duration: 17 Nov 201519 Nov 2015

Publication series

NameLecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
Volume9429
ISSN (Print)03029743
ISSN (Electronic)16113349

Other

Other4th International Visual Informatics Conference, IVIC 2015
CountryMalaysia
CityBangi
Period17/11/1519/11/15

Fingerprint

Comparative Study
Planning
Software
Software engineering
Specifications
Wedge
Comparative Analysis
Software Development
Slope
Specification
Requirements

Keywords

  • Center of rotation of angulation (CORA)
  • Image dimension
  • Mechanical axis
  • Preoperative planning
  • Software
  • Tibial slope
  • Visualize correction

ASJC Scopus subject areas

  • Computer Science(all)
  • Theoretical Computer Science

Cite this

Awang, N., Sulaiman, R., Shapi`i, A., Abd Rashid, A. H., Amran, M. F. M., & Osman, S. (2015). A comparative study of computer aided system preoperative planning for high tibial osteotomy. In Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) (Vol. 9429, pp. 189-198). (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); Vol. 9429). Springer Verlag. https://doi.org/10.1007/978-3-319-25939-0_17

A comparative study of computer aided system preoperative planning for high tibial osteotomy. / Awang, Norazimah; Sulaiman, Riza; Shapi`i, Azrulhizam; Abd Rashid, Abdul Halim; Amran, Mohd Fahmi Mohamad; Osman, Salyani.

Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Vol. 9429 Springer Verlag, 2015. p. 189-198 (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); Vol. 9429).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Awang, N, Sulaiman, R, Shapi`i, A, Abd Rashid, AH, Amran, MFM & Osman, S 2015, A comparative study of computer aided system preoperative planning for high tibial osteotomy. in Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). vol. 9429, Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), vol. 9429, Springer Verlag, pp. 189-198, 4th International Visual Informatics Conference, IVIC 2015, Bangi, Malaysia, 17/11/15. https://doi.org/10.1007/978-3-319-25939-0_17
Awang N, Sulaiman R, Shapi`i A, Abd Rashid AH, Amran MFM, Osman S. A comparative study of computer aided system preoperative planning for high tibial osteotomy. In Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Vol. 9429. Springer Verlag. 2015. p. 189-198. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)). https://doi.org/10.1007/978-3-319-25939-0_17
Awang, Norazimah ; Sulaiman, Riza ; Shapi`i, Azrulhizam ; Abd Rashid, Abdul Halim ; Amran, Mohd Fahmi Mohamad ; Osman, Salyani. / A comparative study of computer aided system preoperative planning for high tibial osteotomy. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Vol. 9429 Springer Verlag, 2015. pp. 189-198 (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)).
@inproceedings{0963e9ca7521453282d7e7d9f8537501,
title = "A comparative study of computer aided system preoperative planning for high tibial osteotomy",
abstract = "We discuss five softwares commonly used for preoperative planning for high tibial osteotomy, namely MedWeb, TraumaCad, MediCad, Sectra and Photoshop. Each software has their own specialty and specification based on surgeon requirements. Detail of methods for each software is discussed. This paper aims to highlights the strength and weaknesses of the softwares. Our comparison shows that the selection of method to be used depends on the needs of the surgeon. The different software suitability discussed are axis used, users’ control capability, automatic wedge selection, CORA’s point, tibial slope, automatic measurement, and visualize correction. The results obtained from the comparative analysis are expected to aid in development innovative software for preoperative osteotomy planning, based on the strengths of each software discussed.",
keywords = "Center of rotation of angulation (CORA), Image dimension, Mechanical axis, Preoperative planning, Software, Tibial slope, Visualize correction",
author = "Norazimah Awang and Riza Sulaiman and Azrulhizam Shapi`i and {Abd Rashid}, {Abdul Halim} and Amran, {Mohd Fahmi Mohamad} and Salyani Osman",
year = "2015",
doi = "10.1007/978-3-319-25939-0_17",
language = "English",
isbn = "9783319259383",
volume = "9429",
series = "Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)",
publisher = "Springer Verlag",
pages = "189--198",
booktitle = "Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)",

}

TY - GEN

T1 - A comparative study of computer aided system preoperative planning for high tibial osteotomy

AU - Awang, Norazimah

AU - Sulaiman, Riza

AU - Shapi`i, Azrulhizam

AU - Abd Rashid, Abdul Halim

AU - Amran, Mohd Fahmi Mohamad

AU - Osman, Salyani

PY - 2015

Y1 - 2015

N2 - We discuss five softwares commonly used for preoperative planning for high tibial osteotomy, namely MedWeb, TraumaCad, MediCad, Sectra and Photoshop. Each software has their own specialty and specification based on surgeon requirements. Detail of methods for each software is discussed. This paper aims to highlights the strength and weaknesses of the softwares. Our comparison shows that the selection of method to be used depends on the needs of the surgeon. The different software suitability discussed are axis used, users’ control capability, automatic wedge selection, CORA’s point, tibial slope, automatic measurement, and visualize correction. The results obtained from the comparative analysis are expected to aid in development innovative software for preoperative osteotomy planning, based on the strengths of each software discussed.

AB - We discuss five softwares commonly used for preoperative planning for high tibial osteotomy, namely MedWeb, TraumaCad, MediCad, Sectra and Photoshop. Each software has their own specialty and specification based on surgeon requirements. Detail of methods for each software is discussed. This paper aims to highlights the strength and weaknesses of the softwares. Our comparison shows that the selection of method to be used depends on the needs of the surgeon. The different software suitability discussed are axis used, users’ control capability, automatic wedge selection, CORA’s point, tibial slope, automatic measurement, and visualize correction. The results obtained from the comparative analysis are expected to aid in development innovative software for preoperative osteotomy planning, based on the strengths of each software discussed.

KW - Center of rotation of angulation (CORA)

KW - Image dimension

KW - Mechanical axis

KW - Preoperative planning

KW - Software

KW - Tibial slope

KW - Visualize correction

UR - http://www.scopus.com/inward/record.url?scp=84950155376&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84950155376&partnerID=8YFLogxK

U2 - 10.1007/978-3-319-25939-0_17

DO - 10.1007/978-3-319-25939-0_17

M3 - Conference contribution

SN - 9783319259383

SN - 9783319259383

VL - 9429

T3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

SP - 189

EP - 198

BT - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

PB - Springer Verlag

ER -