• 211 Citations
  • 7 h-Index
20122019
If you made any changes in Pure these will be visible here soon.

Research Output 2012 2019

Filter
Conference contribution
2015
4 Citations (Scopus)

Modeling of In-Cylinder Soot Particle Size Evolution and Distribution in a Direct Injection Diesel Engine

Zuber, M. A., Wan Mahmood, W. M. F., Harun, Z., Zainol Abidin, Z., La Rocca, A., Shayler, P. & Bonatesta, F., 14 Apr 2015, SAE Technical Papers. April ed. SAE International, Vol. 2015-April.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Direct injection
Engine cylinders
Soot
Diesel engines
Particle size
2014

A study of engine monitoring system using statistical method

Nuawi, M. Z., Khamis, N. K., Zali, Z., Wan Mahmood, W. M. F., Abdullah, S. & Mohd Nopiah, Z., 2014, Applied Mechanics and Materials. Vol. 471. p. 193-196 4 p. (Applied Mechanics and Materials; vol. 471).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Statistical methods
Engines
Monitoring
Sensors
Condition monitoring
2 Citations (Scopus)

Effect of injector nozzle design on spray characteristics for hydrogen direct injection engine conditions

Abu Mansor, M. R., Samiran, N. A., Wan Mahmood, W. M. F. & Raja, N. A., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 660. p. 406-410 5 p. (Applied Mechanics and Materials; vol. 660).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nozzle design
Direct injection
Nozzles
Engines
Orifices

Effect of vaned diffuser on a modified turbocharger centrifugal compressor performance

Jawad, L. H., Abdullah, S., Zulkifli, R. & Wan Mahmood, W. M. F., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 663. p. 347-353 7 p. (Applied Mechanics and Materials; vol. 663).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Vortex flow
Secondary flow
Compressors
Flow of fluids

Improvement of engine performance using an adaptive valve lift and timing (AVLT) mechanism at high engine speeds

Abdul Rasid, A. F., Mohamad, T. I., Ghazali, M. J. & Wan Mahmood, W. M. F., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 663. p. 359-365 7 p. (Applied Mechanics and Materials; vol. 663).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engines
Brakes
Torque
Electric motors
Fuel economy

Interpolation techniques in computational particle tracking inside a direct-injection diesel engine cylinder

Seng, L. B., Zuber, M. A., Wan Mahmood, W. M. F., Zainol Abidin, Z. & Harun, Z., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 663. p. 381-386 6 p. (Applied Mechanics and Materials; vol. 663).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Direct injection
Engine cylinders
Diesel engines
Soot
Interpolation

Measuring and ANFIS modelling for thermal conductivity of Cu/Zn bimetallic nanofluids

Balla, H. H., Abdullah, S., Wan Mahmood, W. M. F., Zulkifli, R. & Sopian, K., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 663. p. 311-316 6 p. (Applied Mechanics and Materials; vol. 663).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thermal conductivity
Fluids
Railroad cars
Thermodynamic properties
Nanoparticles

Public perception and acceptance of diesel-powered passenger cars in Malaysia: An initial study

Hamid, M. F. A., Wan Mahmood, W. M. F., Abu Mansor, M. R. & Abdullah, S., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 663. p. 49-53 5 p. (Applied Mechanics and Materials; vol. 663).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Passenger cars
Railroad cars
Diesel engines
Engines
Air pollution
2013
2 Citations (Scopus)

Comparison of soot particle movement based on crank angle

Hanafi, M. H. M., Wan Mahmood, W. M. F., Abdollah, M. F. B., Rafeq, S. A., Nor, N. F. M., Zulfattah, Z. M., Shamsudin, S. A. & Ibrahim, A., 2013, Procedia Engineering. Elsevier Ltd, Vol. 68. p. 245-250 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Soot
Lubricants
Combustion chambers
Diesel engines
Contamination
1 Citation (Scopus)

Evaluation of noise and air flow on a motorized adaptive valve lift and timing engine

Rasid, A. F. A., Ghazali, M. J., Wan Mahmood, W. M. F. & Mohamad, T. I., 2013, Applied Mechanics and Materials. Vol. 315. p. 482-487 6 p. (Applied Mechanics and Materials; vol. 315).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engines
Air
Intake valves
Air intakes
Fuel economy
2 Citations (Scopus)

Soot particle trajectories of a di diesel engine at 18° ATDC crankshaft angle

Hafidzal, M. H. M., Wan Mahmood, W. M. F., Manaf, M. Z. A., Zakaria, M. S., Saadun, M. N. A. & Nordin, M. N. A., 2013, IOP Conference Series: Materials Science and Engineering. 1 ed. Vol. 50. 012003

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Soot
Crankshafts
Diesel engines
Trajectories
Engine cylinders
2012
1 Citation (Scopus)

A study on alternative fuel blending for Homogeneous Charge Compression Ignition (HCCI) engine using Palm Oil Methyl ester and RON 97

Awaludin, A., Nuawi, M. Z., Ali, Y., Wan Mahmood, W. M. F. & Mohamad, T. I., 2012, Applied Mechanics and Materials. Vol. 165. p. 305-309 5 p. (Applied Mechanics and Materials; vol. 165).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Palm oil
Alternative fuels
Ignition
Esters
Compaction
1 Citation (Scopus)

Car body and chassis development of UKM CARevo for Perodua Eco-Challenge 2011

Wan Mahmood, W. M. F., Mohd Sabri, M. A., Mat Tahir, M. F., Ariffin, A., Zulkifli, R., Jamaluddin, N., Mohamed Haris, S., Ramli, R., Abdullah, S., Abdullah, S. & Shamsudeen, A., 2012, Applied Mechanics and Materials. Vol. 165. p. 260-264 5 p. (Applied Mechanics and Materials; vol. 165).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chassis
Railroad cars
Automobile frames
Fuel injection
Aerodynamics
7 Citations (Scopus)

Comparing the effects of hydrogen addition on performance and exhaust emission in a spark ignition fueled with gasoline and CNG

Zareei, J., Ali, H. Y., Abdullah, S. & Wan Mahmood, W. M. F., 2012, Applied Mechanics and Materials. Vol. 165. p. 120-124 5 p. (Applied Mechanics and Materials; vol. 165).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric sparks
Gasoline
Ignition
Hydrogen
Internal combustion engines

Development of CNG direct injection (CNGDI) clean fuel system for extra power in small engine

Ali, Y., Shamsudeen, A., Abdullah, S. & Wan Mahmood, W. M. F., 2012, AIP Conference Proceedings. Vol. 1440. p. 541-549 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

clean fuels
fuel systems
engines
injection
injectors

Numerical simulation of flow inside a vaned diffuser of a modified centrifugal compressor

Jawad, L. H., Abdullah, S., Zulkifli, R. & Wan Mahmood, W. M. F., 2012, Proceedings of the 18th Australasian Fluid Mechanics Conference, AFMC 2012. Australasian Fluid Mechanics Society

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Compressors
Computer simulation
Computational fluid dynamics
Subsonic flow
12 Citations (Scopus)

Predicted paths of soot particles in the cylinders of a direct injection diesel engine

Wan Mahmood, W. M. F., Larocca, A., Shayler, P. J., Bonatesta, F. & Pegg, I., 2012, SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Direct injection
Engine cylinders
Soot
Diesel engines
Boundary layers