• 168 Citations
  • 6 h-Index
20092019
If you made any changes in Pure these will be visible here soon.

Research Output 2009 2019

  • 168 Citations
  • 6 h-Index
  • 47 Article
  • 18 Conference contribution
  • 1 Conference article
  • 1 Review article
Filter
Conference contribution
2018

STEM Educational Model by Innovative Sustainable Home (iG-HOME)

Mohd Junaidi, M. I., Md Zain, S., Ahmad Basri, N. E., Suja`, F., Osman, S. A., Mohammad Yasin, R. & Hamid, R., 17 Sep 2018, Proceedings - 2017 7th World Engineering Education Forum, WEEF 2017- In Conjunction with: 7th Regional Conference on Engineering Education and Research in Higher Education 2017, RCEE and RHEd 2017, 1st International STEAM Education Conference, STEAMEC 2017 and 4th Innovative Practices in Higher Education Expo 2017, I-PHEX 2017. Institute of Electrical and Electronics Engineers Inc., p. 326-330 5 p. 8467128

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Students
Education
Sustainable development
student
sustainability

The Effectiveness of Industrial Training from the Perspective of Engineering Students

Abu Mansor, M. R., Wan Ghopa, W. A., Osman, S. A., Abd Rahni, A. A., Nordin, D. & Johar, S., 17 Sep 2018, Proceedings - 2017 7th World Engineering Education Forum, WEEF 2017- In Conjunction with: 7th Regional Conference on Engineering Education and Research in Higher Education 2017, RCEE and RHEd 2017, 1st International STEAM Education Conference, STEAMEC 2017 and 4th Innovative Practices in Higher Education Expo 2017, I-PHEX 2017. Institute of Electrical and Electronics Engineers Inc., p. 713-716 4 p. 8466979

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Students
engineering
student
Malaysia
engineer
2016

Implementation of bridge modeling competition in evaluating the students competency

Osman, S. A., Muhamad Azry, K., Nasir, N., Md Yusoff, N. I., A Mutalib, A., Hamzah, N. & Abu Taib, K., 19 May 2016, Proceedings of 2016 IEEE Global Engineering Education Conference, EDUCON 2016: "Smart Education in Smart Cities". IEEE Computer Society, Vol. 10-13-April-2016. p. 1109-1114 6 p. 7474693

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Students
student
creativity
Modeling
Competency

Simulation behavior of flexure in reinforced concrete beam with opening reinforced with glass fiber reinforced polymer (GFRP)

Thabet, S. M. & Osman, S. A., 2016, Advanced Materials Engineering and Technology IV. Trans Tech Publications Ltd, Vol. 857. p. 421-425 5 p. (Materials Science Forum; vol. 857).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

flexing
glass fibers
Glass fibers
Reinforced concrete
Polymers
2014
1 Citation (Scopus)

Experimental analysis of Interlocking load bearing wall brickool system

Osman, S. A., Mohamed, Z. S., Sulaiman, A. R. & Ismail, M. F., 2014, Key Engineering Materials. Vol. 594-595. p. 439-443 5 p. (Key Engineering Materials; vol. 594-595).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Reinforcement
Brick
Loads (forces)

Sensitivity analysis of profiled steel sheet in Profiled Steel Sheet Dry Board system (PSSDB)

Vafa, M., Wan Badaruzzaman, W. H. & Osman, S. A., 2014, Advanced Materials Research. Vol. 838-841. p. 444-447 4 p. (Advanced Materials Research; vol. 838-841).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel sheet
Sensitivity analysis
Load limits
Stiffness
2013
3 Citations (Scopus)

Measurement of students' understanding in final examination of Statics and Dynamics Course using Rasch Measurement Model

Osman, S. A., Muhamad Azry, K., Wan Badaruzzaman, W. H. & A Mutalib, A., 2013, Proceedings of 2013 IEEE International Conference on Teaching, Assessment and Learning for Engineering, TALE 2013. p. 805-810 6 p. 6654549

Research output: Chapter in Book/Report/Conference proceedingConference contribution

examination
student
engineering
advanced course
first-year student

Ultimate strength of composite beam with web openings subjected to combined interaction of negative bending and axial tension

Bavan, M., Baharom, S. & Osman, S. A., 1 Jan 2013, 5th International Conference on Advances in Experimental Structural Engineering, AESE 2013. EUCENTRE, Vol. 2013-November.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Composite materials
Steel
Failure modes
Analytical models
Concretes
2012

Secondary reinforcement in concrete corbel

Rezaei, M., Osman, S. A. & Shanmugam, N. E., 2012, Applied Mechanics and Materials. Vol. 147. p. 24-27 4 p. (Applied Mechanics and Materials; vol. 147).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reinforced concrete
Reinforcement
Concretes
Ductility
Finite element method
2011
1 Citation (Scopus)

An evaluation of Programme Educational Objectives and Programme Outcomes for Civil Engineering programmes

Ahmad Basri, N. E., Abu Taib, K., Jaafar, O., Md Zain, S., Suja`, F., Kasa, A., Osman, S. A. & Shanmugam, N. E., 2011, Procedia - Social and Behavioral Sciences. Vol. 18. p. 56-64 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Program Evaluation
educational program
engineering
employer
alumni

Dynamic characteristics of base-isolated steel frame under seismic ground motion

Masoomi, M. S., Osman, S. A. & Jahanshahi, A., 2011, Advanced Materials Research. Vol. 255-260. p. 2341-2344 4 p. (Advanced Materials Research; vol. 255-260).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel structures
Steel
Nonlinear analysis
Modal analysis
Earthquakes

Modeling of hysteretic damper in three-story steel frame subjected to earthquake load

Masoomi, M. S., Osman, S. A. & Shojaeipour, S., 2011, Advanced Materials Research. Vol. 163-167. p. 3981-3986 6 p. (Advanced Materials Research; vol. 163-167).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nonlinear analysis
Spectrum analysis
Dynamic analysis
Earthquakes
Steel
2 Citations (Scopus)

The effectiveness of industrial training on UKM engineering students

Mat, K., Omar, M. Z., Osman, S. A., Tan Kofli, N., Ab Rahman, M. N., Jamil, M. & Jamaluddin, N., 2011, Procedia - Social and Behavioral Sciences. Vol. 18. p. 656-665 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Malaysia
engineering
Students
student
career

The program outcomes achievement for basic Reinforced Concrete Design course between two different sessions

Osman, S. A., Wan Badaruzzaman, W. H., Hamid, R., Abu Taib, K. & Rashid, A. K., 2011, Procedia - Social and Behavioral Sciences. Vol. 18. p. 260-265 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Students
student
Quality Improvement
project group
examination
2010
2 Citations (Scopus)

Application of isolation systems in the seismic control of cablestayed bridges: A state-of-the-art review

Asgari, B. & Osman, S. A., 2010, International Conference on Engineering Mechanics, Structures, Engineering Geology, International Conference on Geography and Geology - Proceedings. p. 354-362 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

cable
seismic isolation
earthquake damage
research work
natural disaster
2 Citations (Scopus)

Competencies achieved through industrial training programme

Jamil, M., Omar, M. Z., Osman, S. A., Tan Kofli, N., Ab Rahman, M. N. & Mat, K., 2010, International Conference on Engineering Education and International Conference on Education and Educational Technologies - Proceedings. p. 404-408 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

trainee
training program
employer
performance
ability
3 Citations (Scopus)

Finite element analysis of reinforced concrete corbels

Rezaei, M., Osman, S. A. & Shanmugam, N. E., 2010, International Conference on Engineering Mechanics, Structures, Engineering Geology, International Conference on Geography and Geology - Proceedings. p. 448-452 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

reinforced concrete
reinforcement
ductility
analysis
earthquake
2009

Dynamic behaviour of elevated concrete water tank with alternate impulsive mass configurations

Algreane, G. A. I., Osman, S. A., A. Karim, O. & Kasa, A., 2009, Proceedings of the 2nd WSEAS International Conference on Engineering Mechanics, Structures and Engineering Geology, EMESEG '09. p. 245-250 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Concrete tanks
Water tanks
Finite element method
Fluid structure interaction
Hydrodynamics