Siti Aminah Osman, Assoc. Prof. Dr. &ndash; Research Output

2019

Effect of Fibre Treatment on the Physical and Mechanical Properties of Kenaf Fibre Reinforced Blended Cementitious Composites

Ahmad, R., Hamid, R. & Osman, S. A., 1 Jan 2019, In : KSCE Journal of Civil Engineering.

Research output: Contribution to journal › Article

Kenaf fibers

Ashes

Physical properties

Mechanical properties

Fibers

4 Citations (Scopus)

Experimental study on the efficiency of tuned liquid dampers for vibration mitigation of a vertically irregular structure

Pabarja, A., Vafaei, M., C. Alih, S., Md. Yatim, M. Y. & Osman, S. A., 1 Jan 2019, In : Mechanical Systems and Signal Processing. 114, p. 84-105 22 p.

Research output: Contribution to journal › Article

Liquids

Natural frequencies

Steel structures

Dynamic response

1 Citation (Scopus)

Physical and chemical modifications of plant fibres for reinforcement in cementitious composites

Ahmad, R., Hamid, R. & Osman, S. A., 1 Jan 2019, In : Advances in Civil Engineering. 2019, 5185806.

Research output: Contribution to journal › Review article

Open Access

Chemical modification

Reinforcement

Fibers

Composite materials

Surface treatment

2018

1 Citation (Scopus)

Modulus of elasticity and ultrasonic pulse velocity of concrete containing polyethylene terephthalate (Pet) waste heated to high temperature

Alfahdawi, I. H., Osman, S. A., Hamid, R. & Al-Hadithi, A. I., 1 Jan 2018, In : Journal of Engineering Science and Technology. 13, 11, p. 3577-3592 16 p.

Research output: Contribution to journal › Article

Polyethylene terephthalates

Elastic moduli

Ultrasonics

Concretes

Temperature

Nano-silica as the go material on heat resistant tunnel lining

Omar, F., Osman, S. A. & A Mutalib, A., 6 Apr 2018, In : IOP Conference Series: Materials Science and Engineering. 342, 1, 012071.

Research output: Contribution to journal › Conference article

Tunnel linings

Fire protection

Silicon Dioxide

Silica

Coal Ash

3 Citations (Scopus)

Numerical study of the cyclic behavior of steel plate shear wall systems (SPSWs) with differently shaped openings

Ali, M. M., Osman, S. A., Husam, O. A. & Al-Zand, A. W., 10 Feb 2018, In : Steel and Composite Structures. 26, 3, p. 361-373 13 p.

Research output: Contribution to journal › Article

Shear walls

Steel

Cyclic loads

Bearing capacity

Loads (forces)

STEM Educational Model by Innovative Sustainable Home (iG-HOME)

Mohd Junaidi, M. I., Md Zain, S., Ahmad Basri, N. E., Suja`, F., Osman, S. A., Mohammad Yasin, R. & Hamid, R., 17 Sep 2018, Proceedings - 2017 7th World Engineering Education Forum, WEEF 2017- In Conjunction with: 7th Regional Conference on Engineering Education and Research in Higher Education 2017, RCEE and RHEd 2017, 1st International STEAM Education Conference, STEAMEC 2017 and 4th Innovative Practices in Higher Education Expo 2017, I-PHEX 2017. Institute of Electrical and Electronics Engineers Inc., p. 326-330 5 p. 8467128

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Students

Education

Sustainable development

student

sustainability

The Effectiveness of Industrial Training from the Perspective of Engineering Students

Abu Mansor, M. R., Wan Ghopa, W. A., Osman, S. A., Abd Rahni, A. A., Nordin, D. & Johar, S., 17 Sep 2018, Proceedings - 2017 7th World Engineering Education Forum, WEEF 2017- In Conjunction with: 7th Regional Conference on Engineering Education and Research in Higher Education 2017, RCEE and RHEd 2017, 1st International STEAM Education Conference, STEAMEC 2017 and 4th Innovative Practices in Higher Education Expo 2017, I-PHEX 2017. Institute of Electrical and Electronics Engineers Inc., p. 713-716 4 p. 8466979

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Students

engineering

student

Malaysia

engineer

2017

Initial impact analysis of STEM educational model by innovative sustainable home (iG-HOME) using the rasch measurement model

Junaidi, M. I. M., Md Zain, S., Hamid, R., Ahmad Basri, N. E., Suja`, F., Osman, S. A. & Mohammad Yasin, R., 1 Jan 2017, In : Journal of Engineering Science and Technology. 12, Special Issue 12, p. 91-98 8 p.

Research output: Contribution to journal › Article

Students

Education

Sustainable development

Feedback

2016

Distinguishing between civil and structural engineering (CSE) and civil and environment engineering (CEE) programme from student perspective

Hamzah, N., Osman, S. A., Ahmad Basri, N. E., Hamid, R., Shokri, S. N. E. S. M., Mohd Razali, S. F. & Baharom, S., 1 Apr 2016, In : Pertanika Journal of Social Science and Humanities. 24, April, p. 15-24 10 p.

Research output: Contribution to journal › Article

engineering

student

environmental engineering

syllabus

field of study

Effectiveness of pre-Test in determining students' achievement in department fundamental courses

Osman, S. A., Mohd Razali, S. F., Shokri, S. N. S. M., A. Karim, O., Wan Badaruzzaman, W. H., Abu Taib, K. & Muhamad Azry, K., 1 Apr 2016, In : Pertanika Journal of Social Science and Humanities. 24, April, p. 49-62 14 p.

Research output: Contribution to journal › Article

student

engineering

advanced course

Pre-test

Student achievement

Effect of recycle tire isolator as earthquake resistance system for low rise buildings in Malaysia

Jie, S. W., Tong, S. Y., Kasa, A. & Osman, S. A., 1 Aug 2016, In : Journal of Engineering Science and Technology. 11, 8, p. 1207-1220 14 p.

Research output: Contribution to journal › Article

Tires

Bearings (structural)

Earthquake engineering

Finite element method

Rubber

Implementation of bridge modeling competition in evaluating the students competency

Osman, S. A., Muhamad Azry, K., Nasir, N., Md Yusoff, N. I., A Mutalib, A., Hamzah, N. & Abu Taib, K., 19 May 2016, Proceedings of 2016 IEEE Global Engineering Education Conference, EDUCON 2016: "Smart Education in Smart Cities". IEEE Computer Society, Vol. 10-13-April-2016. p. 1109-1114 6 p. 7474693

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Students

student

creativity

Modeling

Competency

Simulation behavior of flexure in reinforced concrete beam with opening reinforced with glass fiber reinforced polymer (GFRP)

Thabet, S. M. & Osman, S. A., 2016, Advanced Materials Engineering and Technology IV. Trans Tech Publications Ltd, Vol. 857. p. 421-425 5 p. (Materials Science Forum; vol. 857).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

flexing

glass fibers

Glass fibers

Reinforced concrete

Polymers

7 Citations (Scopus)

Structural behavior of composite wall systems strengthened with embedded cold-formed steel tube

Hilo, S. J., Wan Badaruzzaman, W. H., Osman, S. A. & Al-Zand, A. W., 1 Jan 2016, In : Thin-Walled Structures. 98, p. 607-616 10 p.

Research output: Contribution to journal › Article

Steel sheet

Steel

Axial loads

Composite materials

Concretes

4 Citations (Scopus)

The effectiveness of industrial training from the perspective of students of the civil and structure engineering department

Osman, S. A., Muhamad Azry, K., Abd. Rahman, N., Abd Rahni, A. A., Abu Mansor, M. R., Nordin, D. & Johar, S., 1 Nov 2016, In : Journal of Engineering Science and Technology. 11, Special Issue onpendidikankejuruteraandanalambina, p. 1-12 12 p.

Research output: Contribution to journal › Article

Students

Civil engineering

Structural design

Planning

7 Citations (Scopus)

Utilizing waste plastic polypropylene and polyethylene terephthalate as alternative aggregates to produce lightweight concrete: A review

Alfahdawi, I. H., Osman, S. A., Hamid, R. & Al-Hadithi, A. I., 1 Aug 2016, In : Journal of Engineering Science and Technology. 11, 8, p. 1165-1173 9 p.

Research output: Contribution to journal › Article

Polyethylene terephthalates

Polypropylenes

Concretes

Plastics

Mortar

2015

31 Citations (Scopus)

Application of shape memory alloy bars in self-centring precast segmental columns as seismic resistance

Nikbakht, E., Rashid, K., Hejazi, F. & Osman, S. A., 4 Mar 2015, In : Structure and Infrastructure Engineering. 11, 3, p. 297-309 13 p.

Research output: Contribution to journal › Article

Shape memory effect

Starters

Tendons

energy dissipation

seismicity

12 Citations (Scopus)

A state-of-the-art review on double-skinned composite wall systems

Hilo, S. J., Wan Badaruzzaman, W. H., Osman, S. A., Al-Zand, A. W., Samir, M. & Hasan, Q. A., 1 Dec 2015, In : Thin-Walled Structures. 97, p. 74-100 27 p.

Research output: Contribution to journal › Article

Composite materials

Steel

Numerical methods

Hot Temperature

Formulation for free-standing staircase

Vahid, S. Z., Sadeghian, M. A., Osman, S. A. & Rashid, A. K. B. A., 17 Sep 2015, In : KSCE Journal of Civil Engineering. 19, 6, p. 1795-1801 7 p.

Research output: Contribution to journal › Article

Stairs

Stress concentration

Materials properties

5 Citations (Scopus)

Optimization of pre-Tensioning cable forces in highly redundant cable-stayed bridges

Asgari, B., Osman, S. A. & Bin Adnan, A., 16 Jan 2015, In : International Journal of Structural Stability and Dynamics. 15, 1, 1540005.

Research output: Contribution to journal › Article

Cable-stayed Bridge

Cable stayed bridges

Cable

Cables

Optimization

Simulation behaviour of precast concrete connection with embedded box section under static loading

Rezaei, M., Osman, S. A., Shanmugam, N. E. & A Mutalib, A., 2015, In : Jurnal Teknologi. 74, 3, p. 7-11 5 p.

Research output: Contribution to journal › Article

Precast concrete

Steel

Flanges

2014

1 Citation (Scopus)

A New multiconstraint method for determining the optimal cable stresses in cable-stayed bridges

Asgari, B., Osman, S. A. & Adnan, A., 2014, In : Scientific World Journal. 2014, 503016.

Research output: Contribution to journal › Article

Cable stayed bridges

cable

Cables

Bending moments

method

14 Citations (Scopus)

A numerical study on seismic response of self-centring precast segmental columns at different post-tensioning forces

Nikbakht, E., Rashid, K., Hejazi, F. & Osman, S. A., 2014, In : Latin American Journal of Solids and Structures. 11, 5, p. 864-883 20 p.

Research output: Contribution to journal › Article

Seismic response

Prestressing

Stiffness

Precast concrete

Reinforced concrete

Erratum to Dynamic versus static artificial neural network model for masonry creep deformation (Proceedings of the Institution of Civil Engineers - Structures and Building, 166, 7(355-366))

El-Shafie, A. & Osman, S. A., 2014, In : Proceedings of the Institution of Civil Engineers: Structures and Buildings. 167, 3, p. 200 1 p.

Research output: Contribution to journal › Article

Creep

Neural networks

Engineers

1 Citation (Scopus)

Experimental analysis of Interlocking load bearing wall brickool system

Osman, S. A., Mohamed, Z. S., Sulaiman, A. R. & Ismail, M. F., 2014, Key Engineering Materials. Vol. 594-595. p. 439-443 5 p. (Key Engineering Materials; vol. 594-595).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Bearings (structural)

Reinforcement

Brick

Loads (forces)

Experimental study on composite plate girders with web opening

Shanmugam, N. E., Darehshouri, S. F. & Osman, S. A., 1 Dec 2014, In : Proceedings of the Institution of Civil Engineers: Structures and Buildings. 167, 12, p. 704-717 14 p.

Research output: Contribution to journal › Article

Beams and girders

Composite materials

Shear strength

Non-linear analysis of membrane action effect in profiled steel sheeting dry board flooring system

Seraji, M., Wan Badaruzzaman, W. H. & Osman, S. A., 2014, In : International Journal of Steel Structures. 14, 2, p. 305-314 10 p.

Research output: Contribution to journal › Article

Nonlinear analysis

Membranes

Load limits

Steel

Concretes

Sensitivity analysis of profiled steel sheet in Profiled Steel Sheet Dry Board system (PSSDB)

Vafa, M., Wan Badaruzzaman, W. H. & Osman, S. A., 2014, Advanced Materials Research. Vol. 838-841. p. 444-447 4 p. (Advanced Materials Research; vol. 838-841).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Steel sheet

Sensitivity analysis

Load limits

Stiffness

2013

5 Citations (Scopus)

An analytical method for ultimate shear strength of composite plate girders with web openings

Darehshouri, S. F., Shanmugam, N. E. & Osman, S. A., Nov 2013, In : Engineering Structures. 56, p. 610-620 11 p.

Research output: Contribution to journal › Article

Beams and girders

Shear strength

Concrete slabs

Steel

Composite materials

4 Citations (Scopus)

Behaviour of stiffened concrete-filled steel composite (CFSC) stub columns

Bahrami, A., Wan Badaruzzaman, W. H. & Osman, S. A., 2013, In : Latin American Journal of Solids and Structures. 10, 2, p. 409-440 32 p.

Research output: Contribution to journal › Article

Steel

Concretes

Composite materials

Nonlinear analysis

Failure modes

1 Citation (Scopus)

Dynamic response of low frequency Profiled Steel Sheet Dry Board (PSSDB) floor system

Gandomkar, F. A., Badruzzaman, W. H. W., Osman, S. A. & Ismail, I., 2013, In : Latin American Journal of Solids and Structures. 10, 6, p. 1135-1154 20 p.

Research output: Contribution to journal › Article

Steel sheet

Dynamic response

Natural frequencies

Dynamic loads

Loads (forces)

2 Citations (Scopus)

Dynamic versus static artificial neural network model for masonry creep deformation

El-Shafie, A. & Osman, S. A., Jul 2013, In : Proceedings of the Institution of Civil Engineers: Structures and Buildings. 166, 7, p. 355-366 12 p.

Research output: Contribution to journal › Article

Creep

Neural networks

Concretes

Mathematical models

Brittleness

2 Citations (Scopus)

Experimental and numerical investigation of the natural frequencies of the composite profiled steel sheet dry board (PSSDB) system

Gandomkar, F. A., Wan Badaruzzaman, W. H., Osman, S. A. & Ismail, A., Apr 2013, In : Journal of the South African Institution of Civil Engineering. 55, 1, p. 11-21 11 p.

Research output: Contribution to journal › Article

Steel sheet

Natural frequencies

Composite materials

Frequency response

Boundary conditions

4 Citations (Scopus)

Investigation of concrete-filled steel composite (CFSC) stub columns with bar stiffeners

Bahrami, A., Wan Badaruzzaman, W. H. & Osman, S. A., 1 Jun 2013, In : Journal of Civil Engineering and Management. 19, 3, p. 433-446 14 p.

Research output: Contribution to journal › Article

Concretes

Steel

Composite materials

Axial loads

Finite element method

3 Citations (Scopus)

Measurement of students' understanding in final examination of Statics and Dynamics Course using Rasch Measurement Model

Osman, S. A., Muhamad Azry, K., Wan Badaruzzaman, W. H. & A Mutalib, A., 2013, Proceedings of 2013 IEEE International Conference on Teaching, Assessment and Learning for Engineering, TALE 2013. p. 805-810 6 p. 6654549

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

examination

student

engineering

advanced course

first-year student

8 Citations (Scopus)

Membrane action in profiled steel sheeting dry board (PSSDB) floor slab system

Seraji, M., Wan Badaruzzaman, W. H. & Osman, S. A., 2013, In : Journal of Engineering Science and Technology. 8, 1, p. 57-68 12 p.

Research output: Contribution to journal › Article

Membranes

Steel

Flanges

Rigidity

Buckling

3 Citations (Scopus)

Monotonic and cyclic loading simulation of structural steelwork beam to column bolted connections with castellated beam

Vahid, S. Z., Osman, S. A. & Khalim, A. R., Aug 2013, In : Journal of Engineering Science and Technology. 8, 4, p. 416-427 12 p.

Research output: Contribution to journal › Article

Finite element method

Cyclic loads

Steel

Software packages

Ductility

MyPDA data map structural review

Hamzah, N., Muhamad Azry, K., Wan Badaruzzaman, W. H., Mohd Tawil, N., O.K. Rahmat, R. A. A. & Osman, S. A., 2013, In : Journal of Engineering and Applied Sciences. 8, 3, p. 81-88 8 p.

Research output: Contribution to journal › Article

Accreditation

Information systems

Polyethylene oxides

Information technology

Websites

2 Citations (Scopus)

Numerical prediction of composite beam subjected to combined negative bending and axial tension

Bavan, M., Baharom, S., A Mutalib, A. & Osman, S. A., Aug 2013, In : Journal of Engineering Science and Technology. 8, 4, p. 428-447 20 p.

Research output: Contribution to journal › Article

Finite element method

Composite materials

Failure modes

Steel

Concretes

4 Citations (Scopus)

Numerical study of concrete-filled steel composite (CFSC) stub columns with steel stiffeners

Bahrami, A., Wan Badaruzzaman, W. H. & Osman, S. A., 2013, In : Latin American Journal of Solids and Structures. 11, 4, p. 683-703 21 p.

Research output: Contribution to journal › Article

Steel

Concretes

Composite materials

Failure modes

Compressive strength

Performance of axially loaded tapered concrete-filled steel composite slender columns

Bahrami, A., Wan Badaruzzaman, W. H. & Osman, S. A., 1 Oct 2013, In : Journal of Civil Engineering and Management. 19, 5, p. 705-717 13 p.

Research output: Contribution to journal › Article

Concretes

Steel

Composite materials

Axial loads

Failure modes

1 Citation (Scopus)

Primary and secondary reinforcements in reinforced concrete corbels

Rezaei, M., Osman, S. A. & Shanmugam, N. E., 1 Dec 2013, In : Journal of Civil Engineering and Management. 19, 6, p. 836-845 10 p.

Research output: Contribution to journal › Article

Reinforced concrete

Reinforcement

Ductility

Software packages

Loads (forces)

2 Citations (Scopus)

Sensitivity analysis of the influence of structural parameters on dynamic behaviour of highly redundant cable-stayed bridges

Asgari, B., Osman, S. A. & Adnan, A., 2013, In : Advances in Civil Engineering. 2013, 426932.

Research output: Contribution to journal › Article

Cable stayed bridges

Sensitivity analysis

Tuning

Analytical models

4 Citations (Scopus)

Three-dimensional finite element modelling of long-span cable-stayed bridges

Asgari, B., Osman, S. A. & Adnan, A., Nov 2013, In : IES Journal Part A: Civil and Structural Engineering. 6, 4, p. 258-269 12 p.

Research output: Contribution to journal › Article

Cable stayed bridges

Vibrations (mechanical)

Sensitivity analysis

Natural frequencies

Ultimate strength of composite beam with web openings subjected to combined interaction of negative bending and axial tension

Bavan, M., Baharom, S. & Osman, S. A., 1 Jan 2013, 5th International Conference on Advances in Experimental Structural Engineering, AESE 2013. EUCENTRE, Vol. 2013-November.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Composite materials

Steel

Failure modes

Analytical models

Concretes

2012

9 Citations (Scopus)

Collapse behavior of composite plate girders loaded in shear

Darehshouri, S. F., Shanmugam, N. E. & Osman, S. A., 1 Mar 2012, In : Journal of Structural Engineering (United States). 138, 3, p. 318-326 9 p.

Research output: Contribution to journal › Article

Beams and girders

Steel

Concrete slabs

Composite materials

Flanges

6 Citations (Scopus)

Dynamic response of low frequency Profiled Steel Sheet Dry Board with Concrete infill (PSSDBC) floor system under human walking load

Gandomkar, F. A., Wan Badaruzzaman, W. H. & Osman, S. A., 2012, In : Latin American Journal of Solids and Structures. 9, 1, p. 21-41 21 p.

Research output: Contribution to journal › Article

Steel sheet

Dynamic response

Concretes

Natural frequencies

Dynamic loads

Secondary reinforcement in concrete corbel

Rezaei, M., Osman, S. A. & Shanmugam, N. E., 2012, Applied Mechanics and Materials. Vol. 147. p. 24-27 4 p. (Applied Mechanics and Materials; vol. 147).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Reinforced concrete

Reinforcement

Concretes

Ductility

Finite element method

3 Citations (Scopus)

Structural behaviour of tapered concrete-filled steel composite(TCFSC) columns subjected to eccentric loading

Bahrami, A., Hamidon, W., Wan Badaruzzaman, W. H. & Osman, S. A., Jun 2012, In : Computers and Concrete. 9, 6, p. 403-426 24 p.

Research output: Contribution to journal › Article

Concretes

Steel

Composite materials

Loads (forces)

Compressive strength