• 1700 Citations
  • 23 h-Index
1992 …2019
If you made any changes in Pure these will be visible here soon.

Research Output 1992 2019

Filter
Conference contribution
2017
1 Citation (Scopus)

Optimizing injection parameters of kenaf filler polypropylene composite by taguchi method

Md Radzi, M. K. F., Muhamad, N., Sulong, A. B. & Razak, Z., 2017, Frontiers of Composite Materials. Trans Tech Publications Ltd, Vol. 894 MSF. p. 81-84 4 p. (Materials Science Forum; vol. 894 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Taguchi methods
Polypropylenes
fillers
polypropylene
Fillers

Tensile properties of unidirectional kenaf polypropylene composite at various temperatures and orientations

Tholibon, D., Sulong, A. B., Muhamad, N., Tharazi, I., Ismail, N. F. & Tholibon, D. A., 2017, Material Science and Engineering Technology V. Trans Tech Publications Ltd, Vol. 890 MSF. p. 16-19 4 p. (Materials Science Forum; vol. 890 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polypropylenes
tensile properties
Tensile properties
polypropylene
composite materials
2016

Characteristic of modified geometrical open-cell aluminium foam by casting replication process

Mohd Razali, R. N., Abdullah, B., Ismail, M. H. & Muhamad, N., 2016, Materials Science Forum. Trans Tech Publications Ltd, Vol. 846. p. 37-41 5 p. (Materials Science Forum; vol. 846).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum
foams
Foams
Casting
holders
2014
7 Citations (Scopus)

Characterization and rheological studies on ready-made feedstock of stainless steel 316L in metal injection molding (MIM) process

Nor, N. H. M., Ismail, M. H., Abu Kasim, N. A., Muhamad, N. & Taib, M. A., 2014, Applied Mechanics and Materials. Vol. 465-466. p. 709-714 6 p. (Applied Mechanics and Materials; vol. 465-466).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Injection molding
Feedstocks
Stainless steel
Scanning
5 Citations (Scopus)

Effects of admixed titanium on densification of 316L stainless steel powder during sintering

Aslam, M., Ahmad, F., Bintimegat Yusoff, P. S. M., Muhamad, N., Raza, M. R. & Irfan Shirazi, M., 2014, MATEC Web of Conferences. EDP Sciences, Vol. 13. 04026

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless Steel
Titanium
Densification
Powders
Sintering
5 Citations (Scopus)

Feedstock characterization of elemental nickel and titanium powders mixture for metal injection moulding process

Razali, R., Abdullah, Z., Subuki, I., Ismail, M. H. & Muhamad, N., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 575. p. 78-82 5 p. (Applied Mechanics and Materials; vol. 575).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Injection molding
Feedstocks
Titanium
Nickel
3 Citations (Scopus)

HA/Ti6Al4V powder with palm stearin binder system - Feedstock characterization

Arifin, A., Sulong, A. B., Muhamad, N., Syarif, J. & Ramli, M. I., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 564. p. 372-375 4 p. (Applied Mechanics and Materials; vol. 564).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Feedstocks
Binders
Powders
Particle size
Metal molding
1 Citation (Scopus)

Influence of calcination on the properties of La0.6Sr0.4Co0.2Fe0.8O3-δ-samarium doped ceria carbonate

Rahman, H. A., Muchtar, A., Muhamad, N. & Abdullah, H., 2014, Applied Mechanics and Materials. Vol. 465-466. p. 949-953 5 p. (Applied Mechanics and Materials; vol. 465-466).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Samarium
Cerium compounds
Lanthanum
Strontium
Calcination
1 Citation (Scopus)

Micro powder injection moulding using nano sized powders

Muhamad, N., Rajabi, J., Sulong, A. B., Fayyaz, A. & Raza, M. R., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1024. p. 116-119 4 p. (Advanced Materials Research; vol. 1024).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Injection molding
Powders
Feedstocks
Binders
Stearic acid
4 Citations (Scopus)

Parameter optimization of debinding injection moulded Ti-6Al-4V mix with palm stearin and polyethylene

Jamaludin, M. I., Mohamad Nor, N. H., Kasim, N. A. A., Saedon, J. B. & Muhamad, N., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 660. p. 234-238 5 p. (Applied Mechanics and Materials; vol. 660).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polyethylenes
Pyrolysis
Heating rate
Feedstocks
Binders

Physical, mechanical and electrical properties of W-20 wt.% Cu composite produced by liquid phase sintering process

Ismail, F., Selamat, M. A., Muhamad, N., Sulong, A. B. & Majid, N. A., 2014, Advanced Materials Research. Vol. 879. p. 21-26 6 p. (Advanced Materials Research; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Liquid phase sintering
Electric properties
Sintering
Physical properties
Mechanical properties
7 Citations (Scopus)

Remote sensing assessment of carbon storage by urban forest

Kanniah, K. D., Muhamad, N. & Kang, C. S., 2014, IOP Conference Series: Earth and Environmental Science. 1 ed. Institute of Physics Publishing, Vol. 18. 012151

Research output: Chapter in Book/Report/Conference proceedingConference contribution

carbon sequestration
remote sensing
carbon
vegetation index
biometry
1 Citation (Scopus)

Rheological properties analysis of WC-Co injection feedstock

Amin, S. Y. M., Muhamad, N. & Jamaludin, K. R., 2014, Materials Science Forum. Vol. 773-774. p. 880-886 7 p. (Materials Science Forum; vol. 773-774).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Feedstocks
MIM (semiconductors)
injection
Powders
polyethylenes
3 Citations (Scopus)

Rheological properties of cemented tungsten carbide feedstock for micro powder injection

Fayyaz, A., Muhamad, N., Sulong, A. B., Yunn, H. S., Amin, S. Y. M. & Rajabi, J., 2014, Materials Science Forum. Vol. 773-774. p. 827-832 6 p. (Materials Science Forum; vol. 773-774).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

tungsten carbides
Tungsten carbide
Powders
Feedstocks
injection

Synthesis and characterization of magnetic mesoporous γ-FE2O3/SIO2

Shaari, N. S., Ibrahim, S., Jamil, F. M., Zubir, Z. A., Abdullah, A. M., Muhamad, N., Wan Jaafar, W. M. N. & Malik, M. Z. A., 2014, Advanced Materials Conference (AMC 2012). Vol. 879. p. 128-133 6 p. (Advanced Materials Research; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sorption
SQUIDs
Magnetism
Magnetometers
Iron oxides
2013

Characterization of micro metal injection molding by using PMMA & PEG

Ibrahim, M. H. I., Muhamad, N. & Sulong, A. B., 2013, Applied Mechanics and Materials. Vol. 315. p. 992-996 5 p. (Applied Mechanics and Materials; vol. 315).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Glycols
Injection molding
Temperature
Powders
5 Citations (Scopus)

Effects of injection temperature and pressure on green part density for ceramic injection molding

Ani, S. M., Muchtar, A., Muhamad, N. & A Ghani, J., 2013, Advanced Materials Research. Vol. 622. p. 429-432 4 p. (Advanced Materials Research; vol. 622).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Injection molding
Paraffin waxes
Powders
Stearic acid
High density polyethylenes
1 Citation (Scopus)

Optimum powder loading of feedstock based on an alumina-zirconia powder for ceramic injection molding

Ani, S. M., Muchtar, A., Muhamad, N. & A Ghani, J., 2013, Advanced Materials Research. Vol. 686. p. 275-279 5 p. (Advanced Materials Research; vol. 686).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Injection molding
Zirconia
Feedstocks
Alumina
Powders

Pre-clinical study on the oral maxillofacial (Omf) titanium alloy implants produced by metal injection molding (Mim) using palm oil based binder system

Ibrahim, R., Azmirruddin, M., Jabir, M., Muhamad, N., Rafiq, M., Kasim, N. A., Muhamad, S., Hanada, K., Shimizu, T. & Itoh, Y., 2013, International Powder Metallurgy Congress and Exhibition, Euro PM 2013. European Powder Metallurgy Association (EPMA)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Palm oil
injection molding
titanium alloys
Titanium alloys

Pre-clinical study on the oral maxillofacial (Omf) titanium alloy implants produced by metal injection molding (Mim) using palm oil based binder system

Ibrahim, R., Azmirruddin, M., Jabir, M., Muhamad, N., Rafiq, M., Kasim, N. A., Muhamad, S., Hanada, K., Shimizu, T. & Itoh, Y., 1 Jan 2013, International Powder Metallurgy Congress and Exhibition, Euro PM 2013. European Powder Metallurgy Association (EPMA), (International Powder Metallurgy Congress and Exhibition, Euro PM 2013).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Palm oil
injection molding
titanium alloys
Titanium alloys

Rheological properties of zirconia toughened alumina powder for ceramic injection molding

Ani, S. M., Muchtar, A., Muhamad, N. & A Ghani, J., 2013, Advanced Materials Research. Vol. 626. p. 294-297 4 p. (Advanced Materials Research; vol. 626).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Injection molding
Zirconia
Feedstocks
Alumina
Powders
15 Citations (Scopus)

Sintering parameter optimization of Ti-6Al-4V metal injection molding for highest strength using palm stearin binder

Nor, N. H. M., Muhamad, N., Mohd Ihsan, A. K. A. & Jamaludin, K. R., 2013, Procedia Engineering. Elsevier Ltd, Vol. 68. p. 359-364 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Injection molding
Binders
Sintering
Taguchi methods

Synthesis and characterization of pure magnesium/bio-glass composite

Zaludin, M. A. F., Jamaludin, S. B. B., Adzali, N. M. S. & Muhamad, N., 2013, 2nd International Conference on Sustainable Materials (ICoSM 2013). Vol. 795. p. 51-55 5 p. (Advanced Materials Research; vol. 795).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnesium
Glass
Composite materials
Magnesium powder
Powder metallurgy
2012

Accurate prediction of springback in forming of BIW parts

Bashah, N. A. K., Zakaria, A., Kamarulzaman, K. Z. I., Mobin, A., Lazat, M. S. M. A., Muhamad, N. & Md Deros, B., 2012, Applied Mechanics and Materials. Vol. 165. p. 93-97 5 p. (Applied Mechanics and Materials; vol. 165).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High strength steel
Neural networks
Railroad cars
Geometry
5 Citations (Scopus)

Ball milling of WC-Co powder as injection molding feedstock

Amin, S. Y. M., Muhamad, N., Jamaludin, K. R., Fayyaza, A. & Yunn, H. S., 2012, Applied Mechanics and Materials. Vol. 110-116. p. 1425-1430 6 p. (Applied Mechanics and Materials; vol. 110-116).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ball milling
Injection molding
Feedstocks
Ethanol
Particle size
1 Citation (Scopus)

Investigations on metal injection molding of 316L SS using thermoplastic natural rubber (TPNR) binder as a new system

Norita, H., Azlina, H. N., Ahmad, S., Muhamad, N., Omar, M. A. & Tarawneh, M. A., 2012, Advanced Materials Research. Vol. 576. p. 150-153 4 p. (Advanced Materials Research; vol. 576).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Injection molding
Thermoplastics
Binders
Rubber
3 Citations (Scopus)

Metal injection moulding of ZK60 magnesium alloy powder using palm stearin based binder system

Harun, M. R., Muhamad, N., Sulong, A. B., Mohamad Nor, N. H. & Jamaludin, K. R., 2012, Advanced Materials Research. Vol. 445. p. 374-379 6 p. (Advanced Materials Research; vol. 445).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Magnesium alloys
Injection molding
Feedstocks
Binders

Optimizing the sintering parameter of metal injection molding compact using robust engineering technique

Jamaludin, K. R., Muhamad, N., Ahmad, S., Ibrahim, M. H. I., Nor, N. H., Harun, M. R. B. & Mohd, M. Y., 2012, Advanced Materials Research. Vol. 445. p. 357-361 5 p. (Advanced Materials Research; vol. 445).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Injection molding
Sintering
Mechanical properties
Taguchi methods
5 Citations (Scopus)

The effect of milling speed and calcination temperature towards composite cathode LSCF-SDC carbonate

Ahmad, S., Bakar, M. S. A., Muchtar, A., Muhamad, N. & Rahman, H. A., 2012, Advanced Materials Research. Vol. 576. p. 220-223 4 p. (Advanced Materials Research; vol. 576).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Samarium
Cerium compounds
Calcination
Carbonates
Cathodes

Thermoplastic natural rubber (TPNR) as a backbone binder for metal injection molding process

Hassan, N., Ahmad, S., Muhamad, N. & Omar, M. A., 2012, Advanced Materials Research. Vol. 428. p. 24-27 4 p. (Advanced Materials Research; vol. 428).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Injection molding
Thermoplastics
Binders
Rubber
2011
4 Citations (Scopus)

An influence of a binder system to the rheological behavior of the SS316l Metal Injection Molding (MIM) feedstock

Jamaludin, K. R., Muhamad, N., Abolhasani, H., Murtadhahadi & Ab Rahman, M. N., 2011, Advanced Materials Research. Vol. 264-265. p. 554-558 5 p. (Advanced Materials Research; vol. 264-265).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Injection molding
Feedstocks
Binders
Linear low density polyethylenes

Application of Taguchi method for parameters optimization in micro metal injection molding

Li, H. P., Muhamad, N., Sulong, A. B., Yunn, H. S. & Abolhasani, H., 2011, Applied Mechanics and Materials. Vol. 52-54. p. 244-248 5 p. (Applied Mechanics and Materials; vol. 52-54).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Taguchi methods
Injection molding
Analysis of variance (ANOVA)
Glycols
3 Citations (Scopus)

A review on preparation of SDC-carbonate as composite electrolyte material for intermediate temperature Solid Oxide Fuel Cells (IT-SOFC)

Muhammed Ali, S. A., Muchtar, A., Muhamad, N. & Sulong, A. B., 2011, 2011 IEEE 1st Conference on Clean Energy and Technology, CET 2011. p. 394-399 6 p. 6041504

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Samarium
Cerium compounds
Solid oxide fuel cells (SOFC)
Carbonates
Electrolytes
4 Citations (Scopus)

Characterisation of titanium alloy feedstock for metal injection moulding using palm stearin binder system

Mohamad Nor, N. H., Muhamad, N., Jamaludin, K. R., Ahmad, S. & Ibrahim, M. H. I., 2011, Advanced Materials Research. Vol. 264-265. p. 586-591 6 p. (Advanced Materials Research; vol. 264-265).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Titanium alloys
Injection molding
Feedstocks
Binders
4 Citations (Scopus)

Comparison on rheology properties of polypropylene and polyethylene as binder system with stainless steel 316L for metal injection moding

Abdullah, M. F., Sulong, A. B., Muhamad, N., Abdullah, M. I. H. C. & Mohamad Yahaya, N. H., 2011, Key Engineering Materials. Vol. 471-472. p. 409-414 6 p. (Key Engineering Materials; vol. 471-472).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polypropylenes
Stainless Steel
Polyethylene
Rheology
Feedstocks
5 Citations (Scopus)

Critical solid loading and rheological study of WC-10%Co

Yunn, H. S., Muhamad, N., Sulong, A. B., Fayyaz, A. & Li, H. P., 2011, Applied Mechanics and Materials. Vol. 52-54. p. 97-102 6 p. (Applied Mechanics and Materials; vol. 52-54).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Powders
Torque
Injection molding
Binders
Viscosity
2 Citations (Scopus)

Debinding process of a starch-based binder in metal injection moulding

Abolhasani, H. & Muhamad, N., 2011, Advanced Materials Research. Vol. 264-265. p. 248-253 6 p. (Advanced Materials Research; vol. 264-265).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Starch
Injection molding
Binders
Temperature

Determination of optimal microminiature powder injection molding parameters by taguchi approach

Li, H. P. & Muhamad, N., 2011, Advanced Materials Research. Vol. 189-193. p. 2997-3000 4 p. (Advanced Materials Research; vol. 189-193).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Injection molding
Powders
Feedstocks
Stainless steel
Analysis of variance (ANOVA)
3 Citations (Scopus)

Difficulty index of examinations and their relation to the achievement of programme outcomes

Johari, J., Sahari, J., Abd. Wahab, D., Abdullah, S., Abdullah, S., Omar, M. Z. & Muhamad, N., 2011, Procedia - Social and Behavioral Sciences. Vol. 18. p. 71-80 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Students
examination
Aptitude
Accreditation
Malaysia
7 Citations (Scopus)

Fabrication and characterisation of La0.6Sr0.4Co 0.2Fe0.8O3-δ-SDC cathode composite

Rahman, H. A., Muchtar, A., Muhamad, N. & Abdullah, H., 2011, Key Engineering Materials. Vol. 471-472. p. 268-273 6 p. (Key Engineering Materials; vol. 471-472).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Samarium
Cerium compounds
Powders
Cathodes
Fabrication
8 Citations (Scopus)

Fabrication of porous LSCF-SDC carbonates composite cathode for solid oxide fuel cell (SOFC) applications

Jarot, R., Muchtar, A., Wan Daud, W. R., Muhamad, N. & Edy Herianto, M., 2011, Key Engineering Materials. Vol. 471-472. p. 179-184 6 p. (Key Engineering Materials; vol. 471-472).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbonates
Solid oxide fuel cells (SOFC)
Cathodes
Powders
Fabrication
1 Citation (Scopus)

Feedstock characterization for micro powder injection molding (μPIM)

Li, H. P. & Muhamad, N., 2011, Advanced Materials Research. Vol. 201-203. p. 1721-1724 4 p. (Advanced Materials Research; vol. 201-203).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Injection molding
Feedstocks
Powders
Stainless steel
Rheometers
4 Citations (Scopus)

Flow behavior characteristic for injection process using nano-yttria stabilized zirconia for micro metal injection molding (μMIM)

Foudzi, F. M., Muhamad, N., Sulong, A. B. & Zakaria, H., 2011, Applied Mechanics and Materials. Vol. 44-47. p. 480-484 5 p. (Applied Mechanics and Materials; vol. 44-47).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Yttria stabilized zirconia
Injection molding
Powders
Rheology
1 Citation (Scopus)

Influence of processing parameters on electrophoretically deposited La 0.6Sr0.4Co0.2Fe0.8O 3-δ films

Rahman, H. A., Muchtar, A., Muhamad, N. & Abdullah, H., 2011, Key Engineering Materials. Vol. 462-463. p. 148-153 6 p. (Key Engineering Materials; vol. 462-463).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lanthanum
Strontium
Ferrite
Processing
Deionized water
3 Citations (Scopus)

Micro powder injection molding (μPIM): Review

Yunn, H. S., Muhamad, N. & Sulong, A. B., 2011, Applied Mechanics and Materials. Vol. 52-54. p. 91-96 6 p. (Applied Mechanics and Materials; vol. 52-54).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Injection molding
Powders
Binders
Costs
1 Citation (Scopus)

Microstructure characterisation of Ag2O3-Bi 2O3 composite cathodes for Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFCs)

Dedikarni, Muchtar, A., Muhamad, N. & Wan Daud, W. R., 2011, Key Engineering Materials. Vol. 471-472. p. 97-102 6 p. (Key Engineering Materials; vol. 471-472).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Solid oxide fuel cells (SOFC)
Cathodes
Microstructure
Composite materials
Temperature
5 Citations (Scopus)

Multiple performance optimization for the best injection molding process of Ti-6Al-4V green compact

Muhamad, N., Mohamad Nor, N. H., Ahmad, S., Ibrahim, M. H. I. & Harun, M. R., 2011, Applied Mechanics and Materials. Vol. 44-47. p. 2707-2711 5 p. (Applied Mechanics and Materials; vol. 44-47).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Injection molding
Powders
Temperature
Analysis of variance (ANOVA)
Titanium alloys
1 Citation (Scopus)

Optimization of injection parameters using 16μm stainless steel powder (SS316L) at 63 vol. %, 63.5 vol. % and 64 vol. % powder loading by taguchi method for metal injection molding

Chua, M. I. H., Sulong, A. B., Muhamad, N., Abdullah, M. F. & Che Haron, C. H., 2011, Key Engineering Materials. Vol. 471-472. p. 558-562 5 p. (Key Engineering Materials; vol. 471-472).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Taguchi methods
Stainless Steel
Injection molding
Powders

Optimization of micro metal injection molding SS 316L for the highest green strength by using Taguchi method

Ibrahim, M. H. I., Muhamad, N., Sulong, A. B., Jamaludin, K. R., Nor, N. H. M. & Ahmad, S., 2011, Advanced Materials Research. Vol. 264-265. p. 135-140 6 p. (Advanced Materials Research; vol. 264-265).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Taguchi methods
Injection molding
Temperature
Feedstocks

Orthogonal array technique for optimizing the sintering parameter of the metal injection molding (MIM) compact: Best flexure strength

Jamaludin, K. R., Muhamad, N., Ab Rahman, M. N., Ahmad, S., Ibrahim, M. H. I. & Nor, N. H. M., 2011, Advanced Materials Research. Vol. 264-265. p. 290-294 5 p. (Advanced Materials Research; vol. 264-265).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal molding
Injection molding
Sintering
Mechanical properties
Analysis of variance (ANOVA)