• 1700 Citations
  • 23 h-Index
1992 …2019
If you made any changes in Pure these will be visible here soon.

Research Output 1992 2019

2019
Titanium alloys
Injection molding
Powders
Sintering
Mechanical properties

Effects of thermal cycling on physical and tensile properties of injection moulded kenaf/carbon nanotubes/polypropylene hybrid composites

Razak, Z., Sulong, A. B., Muhamad, N., Che Haron, C. H., Fadzly Md Radzi, M. K., Ismail, N. F., Tholibon, D. & Tharazi, I., 15 Mar 2019, In : Composites Part B: Engineering. 161, p. 659-666 8 p.

Research output: Contribution to journalArticle

Carbon Nanotubes
Polypropylenes
Thermal cycling
Tensile properties
Carbon nanotubes

Effects of thermal cycling on physical and tensile properties of injection moulded kenaf/carbon nanotubes/polypropylene hybrid composites

Razak, Z., Sulong, A. B., Muhamad, N., Che Haron, C. H., Radzi, M. K. F. M., Ismail, N. F., Tholibon, D. & Tharazi, I., 1 Jul 2019, In : Composites Part B: Engineering. 168, p. 159-165 7 p.

Research output: Contribution to journalArticle

Carbon Nanotubes
Polypropylenes
Thermal cycling
Tensile properties
Carbon nanotubes
Carbon Nanotubes
Polypropylenes
Thermal cycling
Tensile properties
Carbon nanotubes

Incorporation of wollastonite bioactive ceramic with titanium for medical applications: An overview

Zakaria, M. Y., Sulong, A. B., Muhamad, N., Raza, M. R. & Ramli, M. I., 1 Apr 2019, In : Materials Science and Engineering C. 97, p. 884-895 12 p.

Research output: Contribution to journalReview article

Medical applications
activity (biology)
Titanium
biocompatibility
titanium

Influences of temperature and pressure to the green defects

Tatt, T. K., Muhamad, N., Che Haron, C. H. & Sulong, A. B., 1 Jan 2019, In : International Journal of Mechanical Engineering and Technology. 1, p. 186-192 7 p.

Research output: Contribution to journalArticle

Defects
Injection molding
Temperature
Feedstocks
Binders

Processing of Stainless Steel (SS316L)-Hydroxyapatite (HA) Powder Composite through Powder Injection Molding

Ramli, M. I., Sulong, A. B., Muhamad, N., Muchtar, A., Arifin, A. & Park, S. J., 10 May 2019, In : Journal of Physics: Conference Series. 1198, 4, 042017.

Research output: Contribution to journalConference article

Open Access
injection molding
stainless steels
composite materials
sintering
physical properties
Hydroxyapatite
Injection molding
Feedstocks
Titanium
Powders
2018
30 Citations (Scopus)

A review of powder additive manufacturing processes for metallic biomaterials

Harun, W. S. W., Kamariah, M. S. I. N., Muhamad, N., Ghani, S. A. C., Ahmad, F. & Mohamed, Z., 1 Mar 2018, In : Powder Technology. 327, p. 128-151 24 p.

Research output: Contribution to journalReview article

3D printers
Biocompatible Materials
Biomaterials
Powders
Metals
1 Citation (Scopus)

Effect of sintering parameters on physical and mechanical properties of powder injection moulded stainless steel-hydroxyapatite composite

Ramli, M. I., Sulong, A. B., Muhamad, N., Muchtar, A., Arifin, A., Foudzi, F. M. & Hammadi Al-Furjan, M. S., 1 Oct 2018, In : PLoS One. 13, 10, e0206247.

Research output: Contribution to journalArticle

hydroxyapatite
Stainless Steel
stainless steel
Durapatite
Powders
Kenaf fibers
Compression molding
Mechanical properties
Composite materials
Thermogravimetric analysis

Effects of sintering temperature on the physical and mechanical properties of injection-molded Copper/Graphene composite

Kadiman, N. N., Rashid, M. O. A., Muhamad, N. & Sulong, A. B., 1 Jan 2018, In : Journal of Advanced Manufacturing Technology. 12, 1, p. 49-60 12 p.

Research output: Contribution to journalArticle

Sintering
Graphene
Physical property
Copper
Mechanical Properties

Flow behavior and injectability of SS17-4PH with PS and PE binders in powder injection molding

Mas'ood, N. N., Sulong, A. B., Muhamad, N., Intan Fadhlina, M., Foudzi, F. M., Ramli, M. I. & Salleh, F. M., 1 Sep 2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 49, 2, p. 121-125 5 p.

Research output: Contribution to journalArticle

Polyethylene
Injection molding
Powders
Binders
Polyethylenes

Investigation on feedstock preparation for micro-cemented carbide injection molding

Fayyaz, A., Muhamad, N. & Sulong, A. B., 1 Jan 2018, In : Powder Metallurgy Progress. 18, 2, p. 96-102 7 p.

Research output: Contribution to journalArticle

Injection molding
Powders
Feedstocks
Carbides
Binders
1 Citation (Scopus)

Microstructure and physical and mechanical properties of micro cemented carbide injection moulded components

Fayyaz, A., Muhamad, N. & Sulong, A. B., 15 Feb 2018, In : Powder Technology. 326, p. 151-158 8 p.

Research output: Contribution to journalArticle

Carbides
Sintering
Physical properties
Mechanical properties
Microstructure

Numerical simulation analysis of wood/PP composites for injection-moulded car battery trays

Razak, Z., Sulong, A. B., Muhamad, N., Md Radzi, M. K. F., Ismail, N. F., Tholibon, D. & Tharazi, I., 1 Jan 2018, In : International Journal of Engineering and Technology(UAE). 7, 3, p. 15-20 6 p.

Research output: Contribution to journalArticle

Polypropylenes
Wood
Railroad cars
Software
Injections

Optimization of injection molding parameters: Improving mechanical properties of kenaf reinforced polypropylene composites

Md Radzi, M. K. F., Muhamad, N., Sulong, A. B., Che Haron, C. H., Razak, Z., Akhtar, M. N., Ismail, N. F., Tholibon, D. & Tharazi, I., 1 Jan 2018, In : Journal of Advanced Manufacturing Technology. 12, 2, p. 107-120 14 p.

Research output: Contribution to journalArticle

Polypropylene
Injection Molding
Injection molding
Mechanical Properties
Polypropylenes

Pengoptimuman parameter pengacuan suntikan terhadap ketumpatan jasad anum untuk komposit aloi titanium-wolastonit

Translated title of the contribution: Optimization of injection molding parameter towards density of green part for titanium alloy-wollastonite compositeRamli, M. I., Sulong, A. B., Muhamad, N., Muchtar, A. & Zakaria, M. Y., 1 Nov 2018, In : Sains Malaysiana. 47, 11, p. 2869-2875 7 p.

Research output: Contribution to journalArticle

Titanium alloys
Injection molding
Powders
Composite materials
Mechanical properties
1 Citation (Scopus)

Pengoptimuman parameter sonikasi dan pengacauan magnetik bagi mendapatkan penyerakan sebati komposit kuprum-grafin berdasarkan sifat morfologi

Translated title of the contribution: Optimization of sonication and magnetic stirrer parameter for copper-graphene composite’s homogeneous dispersion from morphological propertiesKadiman, N. N., Romli, J. E., Muhamad, N., Sulong, A. B. & Foudzi, F. M., 1 May 2018, In : Sains Malaysiana. 47, 5, p. 1039-1043 5 p.

Research output: Contribution to journalArticle

Sonication
Graphite
Copper
Composite materials
Agglomeration
Zirconia
Stainless steel
Injection molding
Feedstocks
Powders

The effect of kenaf filler reinforcement on the mechanical and physical properties of injection moulded polypropylene composites

Radzi, M. K. F. M., Muhamad, N., Akhtar, M. N., Razak, Z. & Mohd Foudzi, F., 1 Feb 2018, In : Sains Malaysiana. 47, 2, p. 367-376 10 p.

Research output: Contribution to journalArticle

Fillers
Polypropylenes
Reinforcement
Physical properties
Mechanical properties

The effects of maleic anhydride grafted PP (MAPP) on the mechanical properties of injection moulded kenaf/CNTs/PP composites

Razak, Z., Sulong, A. B., Muhamad, N., Che Haron, C. H., Mohd Khairol, M. K. F., Tholibon, D., Tharazi, I. & Ismail, N. F., 1 Jun 2018, In : Sains Malaysiana. 47, 6, p. 1285-1291 7 p.

Research output: Contribution to journalArticle

mechanical property
electron
effect
carbon nanotube
tensile strength
2017
2 Citations (Scopus)

Co-Powder Injection Moulding (Co-PIM) Processing of Titanium Alloy (Ti-6Al-4V) and Hydroxyapatite (HA)

Salleh, F. M., Sulong, A. B., Muhamad, N., Intan Fadhlina, M., Mas'Ood, N. N. & Ukwueze, B. E., 2017, In : Procedia Engineering. 184, p. 334-343 10 p.

Research output: Contribution to journalArticle

Hydroxyapatite
Titanium alloys
Injection molding
Powders
Processing
4 Citations (Scopus)

Effect of multi-walled carbon nanotube on mechanical properties of Kenaf/Polypropylene composites

Razak, Z., Sulong, A. B., Muhamad, N., Radzi, M. K. F. M., Tholibon, D., Tharazi, I. & Ismail, N. F., 1 Jan 2017, In : Journal of Mechanical Engineering. SI 3, 1, p. 107-117 11 p.

Research output: Contribution to journalArticle

Polypropylenes
Carbon nanotubes
Mechanical properties
Composite materials
Injection molding
1 Citation (Scopus)

Effect of space holders on fabrication of porous titanium alloy-hydroxyapatite composite through powder injection molding

Salleh, F. M., Sulong, A. B., Raza, M. R., Muhamad, N. & Fhang, L. T., 1 Sep 2017, In : Sains Malaysiana. 46, 9, p. 1651-1657 7 p.

Research output: Contribution to journalArticle

Hydroxyapatite
Titanium alloys
Injection molding
Sintering
Powders
5 Citations (Scopus)

Effects of debinding and sintering atmosphere on properties and corrosion resistance of powder injection molded 316 L - Stainless steel

Raza, M. R., Ahmad, F., Muhamad, N., Sulong, A. B., Omar, M. A., Akhtar, M. N., Aslam, M. & Sherazi, I., 1 Feb 2017, In : Sains Malaysiana. 46, 2, p. 285-293 9 p.

Research output: Contribution to journalArticle

Inert gases
Injection molding
Corrosion resistance
Sintering
Stainless steel

Effects of fiber content and processing parameters on tensile properties of unidirectional long kenaf fiber reinforced polylactic-acid composite

Tharazi, I., Muhamad, N., Ismail, N. F., Radzi, M. K. F. M., Razak, Z., Tholibon, D. & Akhtar, M. N., 1 Jan 2017, In : Journal of Mechanical Engineering. SI 3, 1, p. 65-76 12 p.

Research output: Contribution to journalArticle

Kenaf fibers
Tensile properties
Acids
Fibers
Composite materials
2 Citations (Scopus)

Kesan suhu pensinteran terhadap sifat mekanik dan mikrostruktur alumina-zirkonia yang difabrikasi dengan kaedah pengacuan suntikan seramik

Translated title of the contribution: Effect of sintering temperature on the mechanical properties and microstructure of alumina-zirconia fabricated via ceramic injection moulding methodMd Ani, S., Muchtar, A., Muhamad, N. & A Ghani, J., 1 Oct 2017, In : Sains Malaysiana. 46, 10, p. 1979-1986 8 p.

Research output: Contribution to journalArticle

Injection molding
Zirconia
Alumina
Sintering
Fracture toughness

Mechanical properties of compression molded epoxy polymer composites reinforced with kenaf fibers

Ismail, N. F., Muhamad, N., Sulong, A. B., Che Haron, C. H., Tholibon, D., Tharazi, I., MdRadzi, M. K. F. & Razak, Z., 1 Jan 2017, In : Journal of Mechanical Engineering. SI 3, 2, p. 1-12 12 p.

Research output: Contribution to journalArticle

Kenaf fibers
Compaction
Mechanical properties
Composite materials
Polymers

Optimization of hot pressing process for unidirectional kenaf polypropylene composites by full factorial design

Tholibon, D., Sulong, A. B., Muhamad, N., Ismail, N. F., Tharazi, I. & Md Radzi, M. K. F., 1 Jan 2017, In : Journal of Mechanical Engineering. SI 3, 2, p. 23-35 13 p.

Research output: Contribution to journalArticle

Hot pressing
Polypropylenes
Kenaf fibers
Tensile strength
Composite materials
3 Citations (Scopus)

Optimization of Hot Press Parameters on Tensile Strength for Unidirectional Long Kenaf Fiber Reinforced Polylactic-Acid Composite

Tharazi, I., Sulong, A. B., Muhamad, N., Che Haron, C. H., Tholibon, D., Ismail, N. F., Radzi, M. K. F. M. & Razak, Z., 2017, In : Procedia Engineering. 184, p. 478-485 8 p.

Research output: Contribution to journalArticle

Kenaf fibers
Tensile strength
Hot pressing
Acids
Composite materials
1 Citation (Scopus)

Optimizing injection parameters of kenaf filler polypropylene composite by taguchi method

Md Radzi, M. K. F., Muhamad, N., Sulong, A. B. & Razak, Z., 2017, Frontiers of Composite Materials. Trans Tech Publications Ltd, Vol. 894 MSF. p. 81-84 4 p. (Materials Science Forum; vol. 894 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Taguchi methods
Polypropylenes
fillers
polypropylene
Fillers

Parameter optimization of sintering Ti-6Al-7Nb powder and palm stearin binder system for the highest sintered density using the Taguchi method

Ahmad, R. N., Muhamad, N., Wahi, A. & Junaidi, S., 1 Jan 2017, In : Journal of Mechanical Engineering. SI 3, 1, p. 55-64 10 p.

Research output: Contribution to journalArticle

Taguchi methods
Binders
Sintering
Titanium
Powders

Rheological properties of titanium alloy (Ti6Al4V) - wollastonite (W) composite using palm stearin as based binder

Ramli, M. I., Sulong, A. B., Muhamad, N., Muchtar, A. & Zakaria, M. Y., 1 Jan 2017, In : Journal of Mechanical Engineering. SI 3, 2, p. 87-96 10 p.

Research output: Contribution to journalArticle

Titanium alloys
Binders
Feedstocks
Powders
Composite materials

Rheological properties of Titanium Niobium based feedstocks for metal injection moulding

Ahmad, R. N., Muhamad, N., Sulong, A. B., Wahi, A. & Salleh, F. M., 1 Jan 2017, In : Journal of Mechanical Engineering. SI 2, 1, p. 139-149 11 p.

Research output: Contribution to journalArticle

Metal molding
Niobium
Injection molding
Feedstocks
Titanium
3 Citations (Scopus)

Rheological study of copper and copper grapheme feedstock for powder injection molding

Emira Binti Azaman, N., Rafi Raza, M., Muhamad, N., Niaz Akhtar, M. & Sulong, A. B., 16 Feb 2017, In : Journal of Physics: Conference Series. 790, 1, 012008.

Research output: Contribution to journalArticle

injection molding
graphene
copper
viscosity
plastics

Tensile properties of unidirectional kenaf polypropylene composite at various temperatures and orientations

Tholibon, D., Sulong, A. B., Muhamad, N., Tharazi, I., Ismail, N. F. & Tholibon, D. A., 2017, Material Science and Engineering Technology V. Trans Tech Publications Ltd, Vol. 890 MSF. p. 16-19 4 p. (Materials Science Forum; vol. 890 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polypropylenes
tensile properties
Tensile properties
polypropylene
composite materials
1 Citation (Scopus)

The characterization and rheological investigation of materials for powder injection moulding

Emeka, U. B., Sulong, A. B., Muhamad, N. & Sajuri, Z., 1 Jan 2017, In : Journal of Mechanical Engineering. SI 3, 2, p. 97-107 11 p.

Research output: Contribution to journalArticle

Injection molding
Powders
Feedstocks
Stainless steel
Shear thinning
2016

Characteristic of modified geometrical open-cell aluminium foam by casting replication process

Mohd Razali, R. N., Abdullah, B., Ismail, M. H. & Muhamad, N., 2016, Materials Science Forum. Trans Tech Publications Ltd, Vol. 846. p. 37-41 5 p. (Materials Science Forum; vol. 846).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum
foams
Foams
Casting
holders
2 Citations (Scopus)
Metal molding
Injection molding
Sintering
Hardness
Tensile strength
14 Citations (Scopus)

Effects of solid loading and cooling rate on the mechanical properties and corrosion behavior of powder injection molded 316 L stainless steel

Raza, M. R., Ahmad, F., Muhamad, N., Sulong, A. B., Omar, M. A., Akhtar, M. N. & Aslam, M., 1 Feb 2016, In : Powder Technology. 289, p. 135-142 8 p.

Research output: Contribution to journalArticle

Stainless Steel
Powders
Stainless steel
Corrosion resistance
Corrosion
33 Citations (Scopus)

Influence of alkaline treatment and fiber loading on the physical and mechanical properties of kenaf/polypropylene composites for variety of applications

Akhtar, M. N., Sulong, A. B., Radzi, M. K. F., Ismail, N. F., Raza, M. R., Muhamad, N. & Khan, M. A., 1 Dec 2016, In : Progress in Natural Science: Materials International. 26, 6, p. 657-664 8 p.

Research output: Contribution to journalArticle

Polypropylenes
Kenaf fibers
Physical properties
Mechanical properties
Fibers

Influence of sintering parameters on the compressive yield strength of stainless steel foams produced by the space holder method

Tatt, T. K., Muhamad, N., Muchtar, A., Sulong, A. B. & Cherng, N. M., 1 Apr 2016, In : Sains Malaysiana. 45, 4, p. 653-658 6 p.

Research output: Contribution to journalArticle

Yield stress
Foams
Sintering
Stainless steel
Light weight structures

Mouldability of wood filler reinforced polypropylene composite for injection moulded engine cover using mould filing simulation

Md Radzi, M. K. F., Sulong, A. B., Zanggi, B. M. & Muhamad, N., 2016, In : Jurnal Teknologi. 78, 6-9, p. 75-81 7 p.

Research output: Contribution to journalArticle

Injection molding
Fillers
Polypropylenes
Wood
Engines
1 Citation (Scopus)

Tensile properties of unidirectional kenaf fiber polypropylene composite

Tholibon, D., Sulong, A. B., Muhamad, N., Ismail, N. F., Tharazi, I. & Md Radzi, M. K. F., 2016, In : Jurnal Teknologi. 78, 6-9, p. 101-106 6 p.

Research output: Contribution to journalArticle

Kenaf fibers
Tensile properties
Polypropylenes
Composite materials
Hot pressing
2015
5 Citations (Scopus)

Characterization of Hydroxyapatite/TI6AL4V composite powder under various sintering temperature

Arifin, A., Sulong, A. B., Muhamad, N. & Syarif, J., 24 Aug 2015, In : Jurnal Teknologi. 75, 7, p. 27-31 5 p.

Research output: Contribution to journalArticle

Hydroxyapatite
Sintering
Powders
Composite materials
Mechanical properties
1 Citation (Scopus)

Comparison of emotional intelligence scores among engineering students of an academic programme

Saibani, N., Sabtu, M. I., Harun, Z., Wan Mahmood, W. M. F., Muhamad, N., Abd. Wahab, D. & Sahari, J., 1 May 2015, In : Journal of Engineering Science and Technology. 10, Spec. Issue 2 on UKM Teaching and Learning Congress 2013, May..., p. 41-51 11 p.

Research output: Contribution to journalArticle

Students
Monitoring
Communication
13 Citations (Scopus)
small and medium-sized enterprise
Sustainable development
innovation
Innovation
sustainability
6 Citations (Scopus)

Effect of Filler Loading and NaOH Addition on Mechanical Properties of Moulded Kenaf/Polypropylene Composite

MdRadzi, M. K. F., Sulong, A. B., Muhamad, N., MohdLatiff, M. A. & Ismail, N. F., 1 Nov 2015, In : Pertanika Journal of Tropical Agricultural Science. 38, 4, p. 583-590 8 p.

Research output: Contribution to journalArticle

filling materials
kenaf
composite materials
polypropylenes
mechanical properties
24 Citations (Scopus)

Effects of binder system and processing parameters on formability of porous Ti/HA composite through powder injection molding

Raza, M. R., Sulong, A. B., Muhamad, N., Akhtar, M. N. & Rajabi, J., 15 Dec 2015, In : Materials and Design. 87, p. 386-392 7 p.

Research output: Contribution to journalArticle

Durapatite
Formability
Titanium
Hydroxyapatite
Injection molding