• 1897 Citations
  • 22 h-Index
20042019
If you made any changes in Pure these will be visible here soon.

Research Output 2004 2019

Filter
Conference contribution
2018

Cutting tool wear prediction using novel pie-zofilm-based vibratory signal analysis (Z-rot)

Kasim, N. A., Nuawi, M. Z., A Ghani, J., Che Haron, C. H., Rizal, M. & Mohamed, M. G., 1 Jan 2018, 25th International Congress on Sound and Vibration 2018, ICSV 2018: Hiroshima Calling. International Institute of Acoustics and Vibration, IIAV, Vol. 5. p. 2868-2875 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

signal analysis
transition points
predictions
vibration
downtime

Study on drilling induced delamination of woven kenaf fiber reinforced epoxy composite using carbide drills

Suhaily, M., Che Haron, C. H., A Ghani, J., Azmi, H., Afifah, M. A. & Khairusshima, M. K. N., 19 Apr 2018, 2018 6th International Conference on Nano and Materials Science, ICNMS 2018. American Institute of Physics Inc., Vol. 1957. 0500041

Research output: Chapter in Book/Report/Conference proceedingConference contribution

drilling
carbides
composite materials
fibers
drill bits
2016
1 Citation (Scopus)

A triaxial cutting force measurement utilizing an embedded transducer on a spindle rotating tool

Rizal, M., A Ghani, J., Nuawi, M. Z. & Che Haron, C. H., 21 Mar 2016, Proceedings of the International Conference on Sensing Technology, ICST. IEEE Computer Society, Vol. 2016-March. p. 289-294 6 p. 7438409

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Force measurement
Transducers
Sensors
Milling (machining)
Telemetering

Fundamental study on delamination in milling kenaf fiber reinforced plastic composite (Unidirectional)

Harun, A., Che Haron, C. H., A Ghani, J., Mokhtar, S. & Sanuddin, A., 2016, Processing. American Society of Mechanical Engineers, Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kenaf fibers
Fiber reinforced plastics
Delamination
Composite materials
Reinforced plastics
1 Citation (Scopus)

Optimisation of end milling machining parameters using the Taguchi method and ANOVA of AlSi/AlN metal matrix composite material

Said, M. S., A Ghani, J., Selamat, M. A., Wan, N. N. I. & Hassan, C. C. H., 2016, Science and Engineering of Materials II: Materials and Technology for a Sustainable Future. Trans Tech Publications Ltd, Vol. 701. p. 200-204 5 p. (Key Engineering Materials; vol. 701).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Silicon alloys
Taguchi methods
Aluminum nitride
Milling (machining)
Analysis of variance (ANOVA)

The challenge in malaysian industries in implementing design of experiment

Jamaluddin, H., A Ghani, J., Ab Rahman, M. N. & Md Deros, B., 2016, 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016. IEOM Society, Vol. 8-10 March 2016. p. 1735-1745 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design of experiments
Industry
Strategic planning
Innovation
Processing
2014
4 Citations (Scopus)

Comparison of dry and cryogenic machining on chip formation and coefficient of friction in turning AISI 4340 alloy steel

Raof, N. A., A Ghani, J., Syarif, J., Che Haron, C. H. & Hadi, M. A., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 554. p. 7-11 5 p. (Applied Mechanics and Materials; vol. 554).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Alloy steel
Cutting fluids
Cryogenics
Machining
Friction
1 Citation (Scopus)

Cutting performances of coated PVD in high speed end milling of aged Inconel 718

Kasim, M. S., Che Haron, C. H., A Ghani, J., Saedon, J. B. & Sulaiman, M. A., 2014, Materials Science Forum. Vol. 773-774. p. 653-660 8 p. (Materials Science Forum; vol. 773-774).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Inconel (trademark)
Physical vapor deposition
high speed
Wear of materials
machining
1 Citation (Scopus)

I-kaz™-based analysis of cutting force signals for tool condition monitoring in turning process

Rizal, M., A Ghani, J., Nuawi, M. Z. & Che Haron, C. H., 2014, Applied Mechanics and Materials. Vol. 471. p. 203-207 5 p. (Applied Mechanics and Materials; vol. 471).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Condition monitoring
Machining
Wear of materials
Cutting tools
Strain gages
2 Citations (Scopus)

Multi-objective optimization using box-behken of response surface iviethodology for ihigh-speed iviachining of inconei 718

Kasim, M. S., Che Haron, C. H., A Ghani, J., Mohamad, E., Izamshah, R., Ali, M. A. M. & Saedon, J. B., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 629. p. 487-492 6 p. (Applied Mechanics and Materials; vol. 629).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Multiobjective optimization
Surface roughness
Milling (machining)
Analysis of variance (ANOVA)
Lubrication
3 Citations (Scopus)

Optimization of cutting parameters for end milling AlSi/AlN metal matrix composite using the Taguchi method

Tomadi, S. H., A Ghani, J., Che Haron, C. H. & Daud, A. R., 2014, Materials Science Forum. Vol. 773-774. p. 429-436 8 p. (Materials Science Forum; vol. 773-774).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Taguchi methods
metal matrix composites
Milling (machining)
Metals
optimization

Preliminary study of fuel injector monitoring system by I-kaz™ multilevel analysis

Karim, Z., Jusoh, M. A., Bahari, A. R., Nuawi, M. Z., A Ghani, J. & Abdullah, S., 2014, Applied Mechanics and Materials. Vol. 471. p. 229-234 6 p. (Applied Mechanics and Materials; vol. 471).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Monitoring
Engines
Combustion chambers
Strain gages
Automotive industry
5 Citations (Scopus)

Tool wear and surface roughness when machining ALSi /ALN metal matrix composite using uncoated carbide cutting tool

Said, M. S., A Ghani, J., Che Haron, C. H., Yusoff, S., Selamat, M. A. & Othman, R., 2014, Materials Science Forum. Vol. 773-774. p. 409-413 5 p. (Materials Science Forum; vol. 773-774).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbide cutting tools
metal matrix composites
machining
carbides
Machining
2 Citations (Scopus)

Tool wear in machining AlSi/AlN metal matrix composite 10 Wt% reinforcement using uncoated cutting tool

Said, M. S., Yusoff, M. S., Che Haron, C. H., Selamat, M. A., Shukur, J. A. & A Ghani, J., 2014, Applied Mechanics and Materials. Vol. 465-466. p. 973-977 5 p. (Applied Mechanics and Materials; vol. 465-466).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum nitride
Cutting tools
Reinforcement
Machining
Wear of materials
1 Citation (Scopus)

Tribological characterization of the cutting zone in milling nickel based alloy

Hadi, M. A., A Ghani, J., Che Haron, C. H. & Raof, N. A., 2014, Applied Mechanics and Materials. Trans Tech Publications Ltd, Vol. 554. p. 12-16 5 p. (Applied Mechanics and Materials; vol. 554).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Milling (machining)
Cryogenics
Machining
Nickel
Surface roughness
2013
13 Citations (Scopus)

Comparison between up-milling and down-milling operations on tool wear in milling Inconel 718

Hadi, M. A., A Ghani, J., Che Haron, C. H. & Kasim, M. S., 2013, Procedia Engineering. Elsevier Ltd, Vol. 68. p. 647-653 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wear of materials
Machining
Aerospace industry
Physical vapor deposition
Cutting tools
5 Citations (Scopus)

Effects of injection temperature and pressure on green part density for ceramic injection molding

Ani, S. M., Muchtar, A., Muhamad, N. & A Ghani, J., 2013, Advanced Materials Research. Vol. 622. p. 429-432 4 p. (Advanced Materials Research; vol. 622).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Injection molding
Paraffin waxes
Powders
Stearic acid
High density polyethylenes

Modulus of rupture correlation study by acoustic signal analysis during impact test

Karim, Z., Said, A. Y. M., Ramli, A. S., Bahari, A. R., A Ghani, J. & Nuawi, M. Z., 2013, Lecture Notes in Engineering and Computer Science. Vol. 3 LNECS. p. 1821-1824 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Signal analysis
Acoustics
Mechanical properties
Notch filters
Hammers
1 Citation (Scopus)

Optimum powder loading of feedstock based on an alumina-zirconia powder for ceramic injection molding

Ani, S. M., Muchtar, A., Muhamad, N. & A Ghani, J., 2013, Advanced Materials Research. Vol. 686. p. 275-279 5 p. (Advanced Materials Research; vol. 686).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Injection molding
Zirconia
Feedstocks
Alumina
Powders
1 Citation (Scopus)

Potential of banana leaves as effective lubricants for high temperature applications - A preliminary approach

Ghazali, M. J., A Ghani, J. & Mazlam, S. M. A. H. T., 2013, 5th World Tribology Congress, WTC 2013. Politecnico di Torino (DIMEAS), Vol. 2. p. 1335-1337 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

High temperature applications
Lubricants

Rheological properties of zirconia toughened alumina powder for ceramic injection molding

Ani, S. M., Muchtar, A., Muhamad, N. & A Ghani, J., 2013, Advanced Materials Research. Vol. 626. p. 294-297 4 p. (Advanced Materials Research; vol. 626).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Injection molding
Zirconia
Feedstocks
Alumina
Powders
10 Citations (Scopus)

The application of I-kaz™-based method for tool wear monitoring using cutting force signal

Rizal, M., A Ghani, J., Nuawi, M. Z. & Che Haron, C. H., 2013, Procedia Engineering. Elsevier Ltd, Vol. 68. p. 461-468 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wear of materials
Monitoring
Machining
Strain gages
Carbon steel
2012
3 Citations (Scopus)

Wear monitoring of connecting rod bearing via air-borne method analyzed by using I-kaz TM multi level value

Karim, Z., Nuawi, M. Z., A Ghani, J., Abdullah, S. & Ghazali, M. J., 2012, Advanced Materials Research. Vol. 445. p. 941-946 6 p. (Advanced Materials Research; vol. 445).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Connecting rods
Wear of materials
Monitoring
Air
2011
2 Citations (Scopus)

Application of FEM in investigating machining performance

Yanda, H., A Ghani, J. & Che Haron, C. H., 2011, Advanced Materials Research. Vol. 264-265. p. 1033-1038 6 p. (Advanced Materials Research; vol. 264-265).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Machining
Finite element method
Cast iron
Die casting inserts
Cutting tools
5 Citations (Scopus)

Barriers of SCM in SMEs

Ab Rahman, M. N., Wasilan, H., Md Deros, B. & A Ghani, J., 2011, Applied Mechanics and Materials. Vol. 44-47. p. 3997-4001 5 p. (Applied Mechanics and Materials; vol. 44-47).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Supply chain management
Industry
1 Citation (Scopus)

Cost saving in an automotive battery assembly line using setup time reduction

Md Deros, B., Mohamad, D., Idris, M. H. M., Ab Rahman, M. N., A Ghani, J. & Ismail, A. R., 2011, 11th WSEAS International Conference on Robotics, Control and Manufacturing Technology, ROCOM'11, 11th WSEAS International Conference on Multimedia Systems and Signal Processing, MUSP'11. p. 144-148 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Seals
Costs
Industry
Hot Temperature
1 Citation (Scopus)

Cutting down the difficulties of SCM implementation: A comparison between Iranian and Malaysian companies

Manzouri, M., Ab Rahman, M. N., Arshad, H. & A Ghani, J., 2011, Applied Mechanics and Materials. Vol. 44-47. p. 3652-3656 5 p. (Applied Mechanics and Materials; vol. 44-47).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Industry
Developing countries
Sales
2 Citations (Scopus)

Evaluation of PVD-inserts performance and surface integrity when turning Ti-6Al-4V ELI under dry machining

Ibrahim, G. A., Che Haron, C. H. & A Ghani, J., 2011, Advanced Materials Research. Vol. 264-265. p. 1050-1055 6 p. (Advanced Materials Research; vol. 264-265).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Physical vapor deposition
Machining
Surface roughness
Hardness
Carbide cutting tools
1 Citation (Scopus)

Improving production line performance: A case study

Mahmood, W. H. W., Ab Rahman, M. N., Md Deros, B. & A Ghani, J., 2011, Applied Mechanics and Materials. Vol. 44-47. p. 4136-4140 5 p. (Applied Mechanics and Materials; vol. 44-47).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Productivity
Experiments

Surface integrity of AISI H13 in end milling and electrical discharge machining process

A Ghani, J., Goh, G. Y. & Che Haron, C. H., 2011, Advanced Materials Research. Vol. 264-265. p. 1044-1049 6 p. (Advanced Materials Research; vol. 264-265).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Electric discharge machining
Milling (machining)
Microhardness
Hardness
Martensite
3 Citations (Scopus)

Surface integrity of Inconel 718 under MQL condition

Che Haron, C. H., A Ghani, J., Kasim, M. S., Soon, T. K., Gusri, A. I. & Sulaiman, M. A., 2011, Advanced Materials Research. Vol. 150-151. p. 1667-1672 6 p. (Advanced Materials Research; vol. 150-151).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lubricants
Surface roughness
Carbide tools
Surface topography
Design of experiments
54 Citations (Scopus)

Surface integrity of Inconel 718 when finish turning with PVD coated carbide tool under MQL

Yazid, M. Z. A., Ibrahim, G. A., Said, A. Y. M., Che Haron, C. H. & A Ghani, J., 2011, Procedia Engineering. Vol. 19. p. 396-401 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbide tools
Physical vapor deposition
Microstructure
Strain hardening
Microhardness
5 Citations (Scopus)

The effect of minimal quantity lubrication (MQL) on the surface roughness of titanium alloy Ti-6Al-4V ELI in turning process

Che Haron, C. H., A Ghani, J., Sulaiman, M. A., Intan, L. R. & Kasim, M. S., 2011, Advanced Materials Research. Vol. 146-147. p. 1750-1753 4 p. (Advanced Materials Research; vol. 146-147).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Titanium alloys
Lubrication
Surface roughness
Carbide tools
Tungsten carbide
4 Citations (Scopus)

The effect of tool edge geometry on tool performance and surface integrity in turning Ti-6AL-4V alloys

Burhanuddin, Y., Che Haron, C. H. & A Ghani, J., 2011, Advanced Materials Research. Vol. 264-265. p. 1211-1221 11 p. (Advanced Materials Research; vol. 264-265).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wear of materials
Geometry
Hardness
Machining
Microstructure
2010
2 Citations (Scopus)

Application of taguchi method for analyzing factors affecting the performance of coated carbide tool when turning FCD700 in dry cutting condition

A Ghani, J., Mohd Rodzi, M. N. A., Nuawi, M. Z., Othman, K., Ab Rahman, M. N., Che Haron, C. H. & Md Deros, B., 2010, AIP Conference Proceedings. Vol. 1315. p. 993-998 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Taguchi methods
carbides
air
manufacturing
analysis of variance
6 Citations (Scopus)

Cutting force analysis when milling Ti-6Al-4V under dry and near dry conditions using coated tungsten carbides

Ahmad Yasir, M. S., Che Haron, C. H., A Ghani, J., Muhamad, N., Gusri, A. I. & M Zaid, A. Y., 2010, Advanced Materials Research. Vol. 129-131. p. 993-998 6 p. (Advanced Materials Research; vol. 129-131).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tungsten carbide
Milling (machining)
Coolants
Machining
Carbide tools

Detection of cutting tool wear using statistical analysis and regression model

A Ghani, J., Rizal, M., Nuawi, M. Z., Che Haron, C. H. & Ramli, R., 2010, AIP Conference Proceedings. Vol. 1285. p. 249-259 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

statistical analysis
regression analysis
machining
coefficients
tornadoes
1 Citation (Scopus)

Effect of aged AlN reinforced Al-Si alloys on dry sliding wear behaviour

Ghazali, M. J., Wahab, M. N., Daud, A. R. & A Ghani, J., 2010, Advanced Materials Research. Vol. 126-128. p. 905-910 6 p. (Advanced Materials Research; vol. 126-128).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum nitride
Wear of materials
Electron microscopes
Hardness
Scanning
2 Citations (Scopus)

Effects of insert nose radius and machining parameters on the surface roughness of stainless steel 316L

Abdullah, M. F., Sulong, A. B., Chua, I. H., Che Haron, C. H. & A Ghani, J., 2010, Key Engineering Materials. Vol. 447 448. p. 51-54 4 p. (Key Engineering Materials; vol. 447 448).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless Steel
Machining
Stainless steel
Surface roughness
Cutting tools

Green turning of FCD 700 ductile cast iron using coated carbide tool

Rodzi, M. N. A. M., A Ghani, J., Eghawail, A. M., Othman, K., Ab Rahman, M. N. & Che Haron, C. H., 2010, AIP Conference Proceedings. Vol. 1285. p. 260-266 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

carbides
casts
iron
air
coolants
7 Citations (Scopus)

Online cutting tool wear monitoring using I-kaz method and new regression model

A Ghani, J., Rizal, M., Nuawi, M. Z., Che Haron, C. H., Ghazali, M. J. & Ab Rahman, M. N., 2010, Advanced Materials Research. Vol. 126-128. p. 738-743 6 p. (Advanced Materials Research; vol. 126-128).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cutting tools
Wear of materials
Monitoring
Machining
Tornadoes
5 Citations (Scopus)

Performance of coated carbide tool in green turning of FCD 700 ductile cast iron

Mohd Rodzi, M. N. A., A Ghani, J., Eghawail, A. M., Othman, K., Ab Rahman, M. N. & Che Haron, C. H., 2010, Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, IMECS 2010. p. 1602-1605 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbide tools
Cast iron
Air
Wear of materials
Coolants
17 Citations (Scopus)

Statistical analysis for detection cutting tool wear based on regression model

A Ghani, J., Rizal, M., Nuawi, M. Z., Che Haron, C. H. & Ramli, R., 2010, Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, IMECS 2010. p. 1784-1788 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cutting tools
Statistical methods
Wear of materials
Machining
Tornadoes
1 Citation (Scopus)

Surface quality of Ti-6%Al-4%V ELI when machined using CVD-carbide tools at high cutting speed

Gusri, A. I., Che Haron, C. H., A Ghani, J., Yasir, A., Zaid, Y. & Yanuar, B., 2010, AIP Conference Proceedings. Vol. 1315. p. 1107-1112 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

machining
carbides
vapor deposition
surface roughness
textures
3 Citations (Scopus)

Tool life and surface roughness of FCD 700 ductile cast iron when dry turning using carbide tool

A Ghani, J., Mohd Rodzi, M. N. A., Othman, K. & Che Haron, C. H., 2010, Advanced Materials Research. Vol. 126-128. p. 347-352 6 p. (Advanced Materials Research; vol. 126-128).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbide tools
Cast iron
Surface roughness
Air
Machining
6 Citations (Scopus)

Tool wear mechanism in continuous cutting of difficult-to-cut material under dry machining

Ibrahim, G. A., Che Haron, C. H. & A Ghani, J., 2010, Advanced Materials Research. Vol. 126-128. p. 195-201 7 p. (Advanced Materials Research; vol. 126-128).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Machining
Wear of materials
Cutting tools
Abrasion
Delamination
4 Citations (Scopus)

Tool wear of PVD coated carbide tool when finish turning inconel 718 under high speed machining

Yazid, M. Z. A., Che Haron, C. H., A Ghani, J., Gusri, A. I. & Ahmad Yasir, M. S., 2010, Advanced Materials Research. Vol. 129-131. p. 1004-1008 5 p. (Advanced Materials Research; vol. 129-131).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbide tools
Physical vapor deposition
Machining
Wear of materials
Abrasives
1 Citation (Scopus)

Tool wear performance of CVD-insert during machining of Ti-6%Al-4%V ELI at high cutting speed

Ibrahim, G. A., Che Haron, C. H. & A Ghani, J., 2010, Key Engineering Materials. Vol. 443. p. 371-375 5 p. (Key Engineering Materials; vol. 443).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chemical vapor deposition
Machining
Wear of materials
Cutting tools
Titanium alloys

Wear mechanism of chemical vapor deposition (CVD) carbide insert in orthogonal cutting Ti-6Al-4V ELI at high cutting speed

Gusri, A. I., Che Haron, C. H. & A Ghani, J., 2010, AIP Conference Proceedings. Vol. 1315. p. 1131-1136 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

inserts
carbides
vapor deposition
rakes
titanium alloys
2009
3 Citations (Scopus)

Pattern recognition system of jatropha curcas fruits using back propagation

Effendi, Z., Ramli, R., A Ghani, J. & Ab Rahman, M. N., 2009, ICSIPA09 - 2009 IEEE International Conference on Signal and Image Processing Applications, Conference Proceedings. p. 58-62 5 p. 5478719

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pattern recognition systems
Fruits
Backpropagation
Feedstocks
Biodiesel